4ms

• Desktop case made of aluminium
• Width: 40 U
• Installation depth for modules: 50.8 mm
• M3 threaded holes
• 4 Slots for modules
• Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0 A (+5 V)
• Dimensions (W x H x D): 248.3 x 159.5 x 53 mm
• Weight: 350 g
• Matching 4ms Power Brick 45 W power supply unit: art. 544815 (not included)

• Desktop case made of aluminium
• Width: 26 U
• Installation depth for modules: 33 mm
• M3 threaded holes
• 2 Slots for modules
• Power supply specifications: 700 mA (+12 V) / 280 mA (-12 V) / 200 mA (+5 V)
• Dimensions (W x H x D): 136.6 x 159.5 x 36 mm
• Weight: 190 g
• Matching 4ms Power Brick 45 W power supply unit: Art.544815 (not included)

• 4-Channel stereo mixer with balanced outputs
• Channels 1 and 2: mono input, signal LED, panorama and level control
• Channel 3 and 4: stereo input, signal LED and level control
• Stereo headphone output with level control
• Stereo sum output with level control
• 2x 6.3 mm jack outputs
• Switchable between "stereo, balanced" and "2x stereo, unbalanced
• Connection to other 4ms Listen modules or WAV recorders possible via jumper cable
• Current consumption: 107 mA (+12 V) / 101 mA (-12 V)
• Width: 12 HP
• Depth: 28.7 mm

• 4-Channel stereo mixer with headphone output
• Channels 1 and 2: mono input, signal LED, panorama and level control
• Channels 3 and 4: stereo input, signal LED and level control
• Stereo headphone output with level control
• Stereo sum output with level control and switch for Eurorack or line level
• Connection to other 4ms Listen modules or WAV recorders possible via jumper cable
• Current consumption: 70 mA (+12 V) / 62 mA (-12 V)
• Width: 10 TE
• Depth: 25 mm

• Voltage controllable clock divider with 8 outputs
• Clock and reset input
• 8 Clock outputs with even and odd divider factors
• Rotate CV input (range 0V to +5V) shifts the different dividers at the output sockets
• Configurable via jumpers: gate/trigger mode, extended division up to /64, spread mode, auto reset, counting direction ascending or descending
• Expandable with 4ms RCD breakout module (art. 545216)
• Current consumption: 33mA (+12V) / 4mA (-12V)
• Width: 4 TE
• Depth: 35 mm

• Desktop case made of aluminium
• Width: 64 U
• Installation depth for modules: 55 mm
• M3 threaded holes
• 6 Slots for modules
• Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0 A (+5 V)
• Dimensions (W x H x D): 329.7 x 159.5 x 57 mm
• Weight: 500 g
• Matching 4ms Power Brick 45 W power supply unit: art. 544815 (not included)

• Playable 4x4 matrix with 16 VCAs
• 4 Inputs and outputs
• Suitable for CV and audio signals (frequency range: 0Hz - 20kHz)
• Per VCA: CV input, illuminated mute button and gain control (-100dB to +20dB)
• Brightness of the buttons symbolises the setting of the gain control or the CV control signal
• Several VCA matrix modules cascadable (4x8, 8x8, 12x4 etc.)
• Current consumption: 110mA (+12V) / 32mA (-12V)
• Width: 26 TE
• Depth: 25 mm

• Desktop case made of aluminium
• Width: 32 U
• Installation depth for modules: 33 mm
• M3 threaded holes
• 2 Slots for modules
• Power supply specifications: 700 mA (+12 V) / 280 mA (-12 V) / 200 mA (+5 V)
• Dimensions (W x H x D): 167.1 x 159.5 x 36 mm
• Weight: 250 g
• Matching 4ms Power Brick 45 W power supply unit: art. 544815 (not included)

• Polyphonic oscillator with up to 16 voices based on intervals of one of 30 selectable scales
• User scales can be programmed on the module or via CV keyboard
• Basic sine waveform with phase distortion, wave folding, FM and cross-modulation options
• Spread control for detuning the oscillators
• Controls for fundamental, pitch (transposition) and detune
• Balance knob controls the weighting between low and high-pitched oscillators
• Adjustable Cross FM with three selectable modes
• Twist control with three selectable modes for phase distortion effects (bit reduction and morphing from sine to sawtooth or square)
• Warp control with three selectable modes for creating different wavefolding sounds
• CV inputs for all parameters
• CV inputs for pitch and fundamental (1V/oct.)
• Learn and Freeze buttons, each with trigger input
• Two audio outputs
• Power consumption: 114 mA (+12 V) / 45 mA (-12 V)
• Width: 16 U
• Depth: 25 mm
• White front panel

• Desktop case made of aluminium
• Width: 34 U
• Installation depth for modules: 55 mm
• M3 threaded holes
• 4 Slots for modules
• Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0 A (+5V)
• Dimensions (W x H x D): 177.3 x 159.5 x 57 mm
• Weight: 300 g
• Matching 4ms Power Brick 45 W power supply unit: art. 544815 (not included)

• Shifting Inverting Signal Mingler
• 4-Channel CV and audio tool for tasks such as scaling, inverting, mixing, splitting and DC offset
• Per channel: signal input and output, bipolar scale control (range -1 to +1), bipolar shift control (DC offset, range -9.5V to +9.5V), bi-polar LED display
• Additional outputs for mix, +slice (positive sum output) and -splice (negative sum output)
• Power consumption: 51mA (+12V) / 51mA (-12V)
• Width: 12 U
• Depth: 22 mm

• Two 16-pin slots for flying bus boards or bus boards
• Connectors for CV/gate bus
• Two power supply connectors for connecting further Row Power modules or 4ms Pod Eurorack enclosures
• Connection: 5.5 mm hollow female plug, 2.1 mm inside
• Polarity: Plus inside
• Power: 2.0 A (+12 V) / 1.4 A (-12 V) / 1.5 A (+5 V)
• Mains switch and control LEDs for +12 V, -12 V and +5 V
• Width: 4 U
• Depth: 27 mm

Note: Requires 4ms Power Brick 90 W (art. 544851 - not included)

• Polyphonic oscillator with up to 16 voices oriented to intervals of one of the 30 selectable scales
• User scales can be programmed on the module or via CV keyboard
• Basic sine waveform with phase distortion, wave folding, FM and cross modulation options
• Spread control for detuning the oscillators
• Controls for fundamental, pitch (transposition) and detune
• Balance knob controls the weighting between low and high-pitched oscillators
• Adjustable Cross FM with three selectable modes
• Twist control with three selectable modes for phase distortion effects (bit reduction and morphing from sine to sawtooth or square)
• Warp control with three selectable modes for creating different wavefolding sounds
• CV inputs for all parameters
• CV inputs for pitch and fundamental (1V/oct.)
• Learn and Freeze buttons, each with trigger input
• Two audio outputs
• Current consumption: 114mA (+12V) / 45mA (-12V)
• Width: 16 TE
• Depth: 25 mm
• Black front panel

4ms Pingable Envelope Generator; Eurorack module; dual-channel function generator; envelope length is set by the time between clock pulses or manual taps (pings); ping times can be divided or multiplied (from /8 to x8) by manual control or CV input; Skew control knob and CV input for setting the envelope-shape (Attack / Decay ratio); Curve control knob and CV input for setting the envelope-curve (exponential, linear, logarithmic); bi-polar Scale control knob (attenuverter) for the envelope signal output (range: -10V to +10V); switchable bi-polar mode (range: +/-5V); for each channel switchable Cycle mode, two trigger inputs (quantuzed and asynchronous), two envelope outputs (variable level and +5V), EOR and EOF trigger outputs; power consumption: 105mA (+12V) / 35mA (-12V); width: 20 HP; depth: 26mm

• Expander for 4ms Quad Clock Distributor (art. 545213)
• Additional functions per channel: Clock output with 3 selectable modes (delayed trigger, inverted gate, shuffle), adjustable gate length / delay time with CV input and bi-polar attenuator, bi-polar attenuator for the div/mult CV input of the Quad Clock Distributor.
• Power consumption: 44mA (+12V) / 30mA (-12V)
• Width: 12 U
• Depth: 25 mm

• Expander for 4ms Rotating Clock Divider (art. 545215)
• Switch for gate/trigger mode, extended division up to /64, spread mode, auto reset, counting direction ascending or descending
• Passive design (does not require power supply)
• Width: 4U
• Depth: 29 mm

• Voltage controllable clock multiplier with 8 outputs
• Clock input and 8 clock outputs with even and odd multiplier values
• Rotate CV input (range 0V to +5V) shifts the different multiplier values at the output sockets
• Slip CV input (range 0V to +5V) adds a shuffle effect to the outputs
• Current consumption: 33mA (+12V) / 4mA (-12V)
• Width: 4 TE
• Depth: 35 mm

• Desktop case made of aluminium
• Width: 60 U
• Installation depth for modules: 33 mm
• M3 threaded holes
• 2 Slots for modules
• Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0 A (+5 V)
• Dimensions (W x H x D): 309.3 x 159.5 x 53 mm
• Weight: 410 g
• Matching 4ms Power Brick 45 W power supply unit: art. 544815 (not included)

• Two-channel digital delay/looper
• Up to 2:54 minutes recording time (at 16 bit / 48kHz)
• Trigger input and ping button for tap tempo and external synchronisation of both channels
• Per channel: Controls for time, feedback, wet/dry mix and delay feed (sound-on-sound)
• Hold and reverse buttons, each with trigger input
• Audio input and output
• Insert (Send / Return) for the feedback path
• CV inputs for time, feedback and delay feed
• Clock outputs for each channel and master tempo
• Powerv consumption: 188mA (+12V) / 48mA (-12V)
• Width: 20 U
• Depth: 25 mm