Ampeg

• For Ampeg Micro VR
• Colour: Black
• With white Ampeg logo

• Power: 100 W @ 4 Ohm
• Speaker configuration: 1x 12" Custom Eminence Speaker
• Preamp with 3-band EQ
• Ultra-Hi and Ultra-Lo switch
• SGT Overdrive with Grit and Level control (Super Grit Technology)
• 1x 6.3 mm Jack input 0dB and 1x 6.3 mm jack input -15dB
• Aux input
• Headphone jack
• XLR DI output
• Footswitch jack: 6.3 mm jack
• Effect loop send and return: 2x 6.3 mm jack
• Dimensions: 462 x 543 x 360 mm
• Weight: 11.75 kg

• For SVT15E

• Equipped with: 4x 10" ceramic Eminence LF loudspeakers and 1" HF compression driver with L-pad volume control
• Rated power: 800W RMS at 8 Ohm
• Frequency range (-3 dB): 55 Hz - 17 kHz
• Lowest usable frequency (-10 dB): 30 Hz
• Sensitivity: 101 dB SPL @ 1W / 1m
• Max. SPL: 130dB
• Connections: 2x Jack
• Dimensions (HxWxD): 693 x 578 x 445 mm
• Weight: 33.3 kg
• Vintage Portaflex design
• Black Diamond Tolex
• Vintage B-15 grille cloth
• Incl. castors

Ampeg AFS2 Footswitch; 2-button footswitch for use with any top or combo that includes switchable functions such as mute, EQ or SGT on/off; cable length 3 metres

• For SVT 810E
• With recesses for handle, feet and footplate

The SVT410HLF is a speaker that can be used as a single speaker safely, without renouncing the desired pressure. It is larger than the conventional 4x 10 speakers, and was equipped with three reflex ports. The total impedance is 4O and therefore fits perfectly to most amplifiers. Amazingly is the rich and deep bass, which is reproduced by the relatively small box. This subwoofer produces an enormous amount of pressure!

• Rated power: 500 W
• Impedance: 4 O
• Equipped with: 4x 10" speakers + horn
• Transition frequency: 4 kHz
• Sensitivity: 98 dB
• Max. SPL: 125 dB
• Frequency range: 48 - 18,000 Hz
• Dimensions approx.: 76 x 60 x 48 cm
• Weight: 38.6 kg

• Low end woofer
• Equipped with 8x 10" Eminence speakers
• Power rating: 800 Watt RMS
• Jack and speaker twist socket
• Max. SPL: 130 dB
• Impedance: 4 Ohm - switchable to 2 x 8 Ohm bi amp/ stereo
• Frequency range: 40 Hz - 5 kHz
• Dimensions: 121.92 x 66.04 x 40.64 cm
• Weight: 75 kg

Bundle offer comprising

• Bass Amp HeadSince its launch in 1969, there is no alternative to the original SVT from Ampeg. The classic convinces with its unique sound and its "tube-strong" 300 Watt output power.

Now, almost four decades later, Ampeg introduces a mini-version of the legendary amplifier, which was launched under the name of SVT Micro Head. It is ideal for smaller stages and sound studios, where an original SVT would be too big and too loud.

The Micro Head is visually linked to the original SVT - with the silver front plate, the black cover, the chrome-plated corners and the silver-blue face plate, the SVT Micro Head clearly makes it clear that it is not a toy. Despite its small dimensions of 14 cm (height), 30 cm (width) and 25 cm (depth), the head has a real Ampeg preamp and a strong 200 watt transistor output stage.

For recording sessions, the SVT Micro Head has an Aux-Stereo input, which is mixed with the main input and sent to the headphone output. This feature allows the musician to listen to a click or guide track at the same time, record the direct signal from the "pream-out" and remove the amplifier via a microphone. For live applications, the familiar Ampeg Preamp controls include 15 dB pad, gain, bass, ultra-mid, treble, volume and limiter defeat, allowing the musician to quickly and effectively find the desired sound. The world-wide switching power supply and the compact dimensions make the amp the ideal travel companion.

• 200 W RMS at 4 ohms
• Transistor preamp
• MOSFET output stage
• Aux stereo input (can be mixed with main input and be sent to the headphone output)
• Suitable for click or guide track
• Controls for 15 dB pad, gain, bass, Ultra-Mid, Treble, Volume and Limiter Defeat
• Silver faceplate
• Black reference
• Chrome corners and silver blue mesh fabric
• Switching power supply for worldwide use
• Dimensions (H x W x D): 304 x 140 x 254 mm

• Bass Cabinet
• Equipped with: 2 x 10" Eminence speakers
• Power rating: 200 Watt RMS at 8 Ohm (mono)
• Portable alternative to the full-size SVT cabinet
• Frequency range (-3 dB): 58 - 5,000 Hz
• Usable low frequency (-10 dB): 40 Hz
• Dimensions (H x W x D): 610 x 330 x 280 mm
• Weight: approx. 14 kg

• The sssnake PPS 1015
• 1.5 m Speaker cable, 2 x 1.5 mm² cross section
• 6.3 mm Jack - 6.3 mm Jack
• Suitable for passive speakers - not for active speakers

• Power: 30 watts @ 4 ohms
• Speaker: 1x 8" Ampeg
• Controls: Volume, Preamp with 3 band EQ
• SGT overdrive switch (Super Grit Technology)
• Inputs: 6.3 mm jack input 0 dB and 6.3 mm jack input -15dB, aux in
• Headphone out
• Dimensions: 433 x 411 x 306 mm
• Weight: 10.5 kg

• Equipped with 8x 10" Eminence speaker
• Power rating: 800 Watt RMS
• Jack and speaker twist socket
• Max. SPL: 130 dB
• Impedance: 4 Ohm - switchable to 2 x 8 Ohm bi amp/ stereo
• Frequency range: 40 Hz - 5 kHz
• Low end woofer
• Front grille: silver grey
• Dimensions: 121.92 x 66.04 x 40.64 cm
• Weight: 75 kg

• Suitable for the Heritage 50th Anniversary top by Ampeg
• Drivers: 8x 10 Custom U.S. made Eminence speakers
• Power handling: 800 W at 4 ohms (mono) or 2 x 400 W at 8 ohms (stereo)
• Max. sound pressure: 130 dB
• Frequency range: 40 - 5.000 Hz
• 15 mm poplar plywood cabinet
• Connection: Jack and speaker twist
• Finish: Black with blue/silver front cover
• Dimensions: 122 x 66 x 41 cm
• Assembled in the USA

• Dust cover / cover for SVT - 210AV

• Analog chorus pedal
• Dual chorus circuit provides full chorus sounds for bass and guitar
• Controls: rate - depth - effect level
• LED: effect on - rate speed
• True bypass
• Bypass footswitch
• Connectors: input (6.3 mm jack) - output (6.3 mm jack) - power supply connector (coaxial power connector, 5.5 x 2.1 mm, negative pole inside)
• Power supply via a 9V battery or 9V DC power supply (not included, corresponding power supply available: Article Nr 409939)
• Dimensions (W x D x H): 66 x 114 x 56 mm
• Weight: 272 g

• All-tube amplifier
• Power: 50 W @ 4 or 8 Ohm
• 2 Preamp tubes 12AX7
• 1 Power amp tube 12AU7
• 2 Power amp tubes 6L6
• 2 Inputs: 0 db and -15 db
• Controls: Bass, mid and treble
• 5-Step control for mids
• Ultra hi/lo boosts
• Input gain control
• Pre/Post EQ
• Ground Lift
• Transformer balanced line out
• Ideal for studio applications as load resistance (speaker) is not required
• Adjustable bias controls
• Dimensions: 382 x 190 x 260 mm
• Weight: 8.8 kg

• SVT 410 HLF
• Inside dimensions (WxHxD): 610 x 762 x 483 mm

• Equipped with: 2 x 10" Eminence speakers
• Power rating: 200 Watt RMS at 8 Ohm (mono)
• Portable alternative to the full-size SVT cabinet
• Frequency range (-3 dB): 58 - 5,000 Hz
• Usable low frequency (-10 dB): 40 Hz
• Dimensions (H x W x D): 610 x 330 x 280 mm
• Weight: approx. 14 kg

Ampeg RB112 Amp Cover; High quality cover for Rocket Bass 112 amplifier; Tear, abrasion and water resistant; 600-denier vinyl exterior with 5mm padding; Rear pocket with plenty of room for accessories

• Equipped with: 2 x 10" Ceramic Eminence LF speakers and 1" HF compression driver with L-pad volume control
• Power rating: 450 W RMS @ 8 Ohm
• Frequency range: 37 Hz - 17 kHz
• Sensitivity: 99.6 dB SPL @ 1 W / 1 m
• Dimensions (H x W x D): 584.20 x 533.40 x 355.60 mm
• Weight: 21.6 kg
• Vintage Portaflex Flip Top design, Black Diamond Tolex, Vintage B-15 grill cloth

• The footswitchable Ampeg preamp offers a wide selection of authentic Ampeg sounds, from smooth Portaflex up to harmonically-rich SVT
• Real distorted SVT tone
• Controls (Scrambler): Drive and Blend
• Controls (pre-amp): Volume, Bass, Mid, Treble and AUX Level
• Ultra Lo and Ultra Hi switch
• AUX input (6.3 mm & 2.5 mm jack)
• Balanced XLR line output with ground lift
• Output jack
• Thru jack output (unprocessed)
• Headphone output
• Power supply: 9V battery or 9 - 12V DC power supply (not included)
• Current consumption: 100 mA
• Dimensions (W x H x D): 193 x 56 x 110 mm
• Weight: Approx. 1.2 kg