Apogee

• Pro Tools HD Port: Up to 32 bi-directional channels at up to 192kHz
• Routing of Symphony I/O module inputs or Dante RX in blocks of 8 channels each to inputs in Pro Tools
• Routing of Pro Tools HD outputs to Dante-Tx and I/O module outputs
• Up to 32 bidirectional channels at 96kHz
• 16 bi-directional channels at 192kHz
• Apogee Network Control software
• Remote control of Symphony I/O settings including mic preamps (if present)
• Calibration and monitor control
• Seamless interaction with any other Dante-enabled device
• Compatible with macOS and Windows 10

• With USB-C connection and DSP
• 24Bit/192kHz AD/DA converter
• 2 Audio inputs for microphones and line signals (XLR) or instruments (6.3 mm TS jack)
• Microphone preamp with 65dB gain and switchable +48V phantom power
• Soft limiter and phase inversion
• Internal DSP for low-latency recording with Apogee FX (incl. Symphony ECS Channel Strip)
• Aluminium body and top made of Gorilla Glass
• Stereo line output: 2x 6.3 mm TRS jacks
• Stereo headphone output: 3.5 mm TRS jack
• Power supply via USB-C port
• Fully controllable via Apogee Control 2 software
• System requirements: macOS 10.15, Win10
• Dimensions (WxDxH): 103 x 151 x 30 mm
• Weight: 1.4 kg
• Includes breakout cable, transport case and USB-C cable
• Matching Apogee Duet Dock: Art.523348 (not included in delivery)

• Suitable for Apogee Jam and Apogee Jam96k (devices not included)
• Colour: Blue

• Up to 24 bit / 192 kHz
• ESS Sabre DAC
• 4 DACs per channel for highest dynamic range
• A-Synchronous Clocking
• Multi-color LED for status and level display
• USB Bus-Powered
• Aluminium housing
• THD + N: -107 dB at 600 Ohms load @ 16 dBu
• THD + N: -100 dB at 30 Ohms load @ 10.5 dBu
• Dynamic range: 117 dB a-weighted
• Frequency range: 10 Hz - 20 K +/- 0.2 dB
• Max. Output level: 225 mW 30 Ohm, 40 mW 600 Ohm
• System Requirements: Mac OSX 10.8 or later (no driver required), Windows 7 or later, 32 and 64 bit (driver download required)
• Dimensions (L x W x H): 95 x 30 x 16 mm
• Includes 25 mm USB cable, transport bag
• Built in the USA

• Dock for Apogee Duet 3 (Art.523347) for convenient integration into a studio environment
• 2 Audio inputs for microphones and line signals (XLR) or instruments (6.3 mm TS jack)
• Stereo line output: 2x 6.3 mm TRS jacks
• Stereo headphone output: 6.3 mm TRS jack
• 2x USB-C port
• Dimensions (W x D x H): 195 x 200 x 65 mm
• Weight: 400 g

Apogee BOOM; 2-channel USB 2.0 audio interface with DSP; 24-Bit / 192 kHz; on-board hardware DSP running Symphony ECS Channel Strip (3-band EQ, highpass filter, compressor and drive); XLR/TRS combo input for microphones and line signals; +62dB gain for microphone signals; +48V phantom power, pad and phase reverse selectable via Apogee Control 2 software; input for instruments and line signals (6.3mm jack); switchable direct monitoring; switchable loopback-function for streaming applications; USB bus-powered; x2 line outputs (6.3mm jack, balanced); stereo headphones output (6.3mm jack); USB-C port; including Ableton Live Lite, Apogee Control 2 Software (macOS, iOS, Windows), Apogee Soft Limit Plugin (Download), USB-C cable with included USB-C to USB-A adapter; dimensions (WxDxH): 164 x 117 x 51 mm; weight: 731 g

• AD/DA converter up to 192 kHz
• Chassis incl. input/output module
• Free slot for additional I/O modules
• Colour display
• 2 Line inputs via XLR balanced
• 6 Line outputs via Sub-D25 balanced
• AES input and output
• Optical input and output for S/PDIF / ADAT
• Coaxial input and output for S/PDIF
• Word clock input and output
• Stereo headphone jack via 6.3 mm jack
• 2 Thunderbolt connections (TB cable not included in delivery!)
• Dimensions (W x H x D): approx. 48.26 x 8.9 x 29.2 cm

• 10 In x 14 Out desktop audio interface with high-quality converters and circuit designs from the Symphony series
• 2 Microphone preamps with up to 75 dB of gain and variable impedance
• DSP processing for preamp emulations (British Solid State & 50s American Tube) and Symphony ECS Channel Strip (EQ, compression, saturation)
• 24-Bit/192 kHz
• Dynamic touch screen display
• MIDI via USB
• 2 Mic/Line inputs (XLR / TRS combo connector)
• DI Instrument input with FET input stage (6.3 mm TS jack)
• 2 Monitor outputs (6.3 mm TRS jack)
• 2 Assignable stereo headphone outputs (3.5 mm & 6.3 mm TRS jacks )
• Optical input/output (ADAT & S/PDIF)
• USB-A host port and USB-C port
• System requirements: from macOS 10.13, from Windows 10 Anniversary, from iOS 13 (iPad Pro)
• Includes Symphony ESC Channel (native), Symphony Reverb (native), power supply (12 V DC), and 2 USB cables
• Dimensions: 199 x 125 x 64 mm (W x D x H)

• Directivity: Cardioid
• Preamp with 46 dB gain and precise digital control
• Analog compressor with three switchable stages for sound processing
• Level 1: Adapted for vocals and instruments
• Level 2: Present voice for podcast and streaming
• Stage 3: Strong compression for broadcast
• AD Converter with 24-bit / 96 kHz
• Maximum SPL: 130 dB (1% THD at 1kHz)
• Sensitivity: -36 dBfs (94 dB SPL, 1 kHz)
• Noise: -108 dBfs (A) at 0 dB Gain
• Stereo headphone output (3.5 mm)
• Blend function for latency-free interception
• Micro USB port
• System requirements: Minimum Mac OSX 10.9, Windows 10 or higher, iOS 9 or higher
• Compatible iOS devices: iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch, iPad Air 2, iPad Air, iPad mini 4, iPad mini 3 , iPad mini 2, iPad mini, iPad (6th generation), iPad (5th generation), iPad (4th generation), iPod touch (6th generation), iPod touch (5th generation)
• Scope of delivery: Desktop tripod, tripod adapter, pop filter, transport case, microUSB to USB-C cable, microUSB to USB-A cable, microB to lightning cable, quick start guide
• Dimensions: 124 x 38 x 38 mm
• Weight: 200 g

• 2 x Line input XLR
• 6 x Line output SubD-25
• AES input and output XLR
• S / PDIF input and output coaxial and optical, usable as ADAT

• AD/DA Converter for computers and iOS devices
• 96 kHz / 24 bit PureDIGITAL converter
• Instrument input - optimized for guitar and bass
• Overdrive mode for a more realistic sound of virtual amps and effects
• Latency-free recording and monitoring
• Robust metal housing with a soft-touch foot
• Instrument input: 6.3 mm
• Headphone output: 3.5 mm
• USB micro port
• Compatible with Mac OS X, Windows and iOS
• Includes Positive Grid BIAS FX LE Jam Software, USB A cable, USB C cable and Lightning cable

• For iOS, Mac and Windows
• PureDIGITAL connection for sound quality up to 24-bit / 96 kHz
• Polar pattern: cardioid
• Microphone preamp with 46 dB gain and precise digital control, Plug In & Record
• Powerful headphone output with blend function for latency-free recording
• Multi-Colour Status LED
• System requirements: iOS Version: 9 or later
• Devices: iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6 Plus, iPhone 6 Plus, iPhone 6 Plus, iPhone 5, iPhone 5, iPhone 5, iPhone 5, iPad Pro 10.5", iPad Pro 12.9" (2 Generation)
• iPad Pro 9.7 inch, iPad Pro 12.9 Z" (1st generation), iPad Air 2, iPad Air, iPad (5th generation), iPad (4th generation), iPad mini 4, iPad mini 3, iPad Mini 2, iPad mini, iPod touch (6th generation), iPad touch (5th generation) Mac OS: Computer: Mac with Intel processor Memory: 4 GB minimum Mac OS version: 10.9 or later Connection and power supply: USB port on the Mac Memory: 2 GB minimum
• Dimensions: 124 x 38 x 38 mm
• Weight: 0.2 kg

Delivery:

• MiC +
• USB-A cable (1 m)
• USB-C cable (1 m)
• Lightning cable (1 m)
• Tripod
• Adapter for microphone stand

• 2 Module slots for optional input / output modules
• 1 Module slot for optional system expansion (eg ProTools HD)
• Dual multi-function encoder
• Intuitive user interface with touch display
• 1 Independent headphone output
• Stand-alone functionality
• Word clock I / O
• 2 Thunderbolt terminals
• Backward compatible with all I / O modules from the first generation symphony
• Compatibility: Thunderbolt Mac OS 10.9.5 and higher
• Format: 19 "/ 2U
• Dimensions: 450 x 292 x 89 mm

• Apogee 24 bit / 96kHz transducer
• Pre-polarised capsule with 4 mm diameter
• Polar pattern: Omnidirectional
• Frequency range: 30 - 20000 Hz
• Maximum level: 127dB
• 35dB Preamp gain
• Interchangeable USB cable for compatibility with iPhone, iPad, macOS and Windows
• Cable length: 1.2 m

Included accessories:

• Clip
• Metall windscreen
• Foam windscreen
• Bag
• USB-A cable (1 m)
• USB-C cable (1 m)
• Lightning cable (0.3 m)
• Instruction manual