Catalinbread

• Reverb
• Authentic tube spring reverb emulation
• Easy handling
• Controls: Dwell, tone, mix and volume
• Current consumption: 64mA
• Power supply with a 9 - 18 V DC power supply (coaxial plug - negative pin inside, not included, suitable power supply available Art. 409939)
• Made in USA

• Distortion
• Sings like a fuzz, but remains tight as a distortion
• Offers a very large distortion range, ranging from a beautiful, singing tone, harmonious crunch to fuzz chaos
• Controller: Input, gain, filter, volume
• Power consumption: 6.3 mA
• Power supply via 9 Volt battery or 9 Volt power supply (coaxial connection, negative pole inside, not included, suitable power supply: Art.409939)
• Made in USA

Catalinbread Topanga Burnside; Effects Pedal for Electric Guitar; authentic tube spring reverb emulation; extension of Catalinbread Topanga with a tremolo control; easy handling; Controls: Dwell, Trem, Tone, Mix, Vol; LED: Effect On; Footswitches: Effect Bypass; Connections: Input (1/4" Jack), Output (1/4" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; powered by a 9-18 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939); Made in USA; Note: Battery operation is not supported

• Eight-stage phaser with eight selectable phase control parameters, six LFOs and two envelope-dependent phase shift modes
• From classic, swirling and rich to vibe-esque phaser sounds
• Controls: Attack/Freq, Sens/Freq 2/Depth, Feedback, Mix, LFO
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art. 409939)
• True bypass
• Dimensions (W x D x H): 60 x 110 x 50 mm
• Weight: 180 g
• Made in USA

Note: Battery operation is not supported.

• Delay
• Emulation of an oil can echo unit
• Dark-sounding echoes with a vibrato modulation synchronised with the delay time and a delay sound generate a cool, floating sound
• Ideal for creating a similar sound to that of the official Italo Western or Shadows
• Controls: Reverb, Viscosity, Timing, Blend, Balance
• Power supply via 9 - 18 V DC power adaptor (coaxial connector - negative pin inside, not included, compatible power adapter: Article Nr 409939)
• Made in USA

• Shoegaze-style reverb
• Controls: Symphony, Modulation, Verb, Mix, Volume
• LED: Effect On
• Footswitch: Effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power supply via 9 V DC mains adapter (not included, suitable mains adapter: art. 409939)
• Power consumption: 100 mA
• Switchable true/buffered bypass
• Dimensions (W x D x H): 60 x 110 x 50 mm
• Weight: 180 g
• Made in USA

Note: Battery operation is not supported.

• An authentic emulation of the famous Echoplex EP-3 tape echo including preamp
• Delay time: from 80 - 800 ms
• Controls: Echo sustain, modulation, record level, mix & echo delay
• Internal switches: Gain Trimmer & Buffer/True Bypass
• Power supply with a 9-18 V DC power supply unit with coaxial connection and negative polarity inside, suitable power supply unit article no. 409939, not included in the delivery
• Current consumption: 60mA
• Made in USA

• Preamp and overdrive
• Vintage Ampeg growls for bass and guitar
• Controls: Treble, Bass, Volume and Gain
• Stones/Stoner switch
• Power supply via 9 V battery or a 9-18 V DC power supply (coaxial connector, negative pin inside)
• Power supply not included (available under article nr 409939)
• Power consumption: 4 mA
• Made in USA

• Fuzz
• Produced in collaboration with Mark Moseley
• A true to the original reproduction of the classic circuit of the 60s
• Controllers: Volume & Depth
• Power supply with 9 V battery or 9-18 V DC power supply (coaxial connection - negative pole inside, not included, suitable power supply available under Article Nr 409939)
• Current consumption: 5 mA
• Made in USA

• Reverb
• Authentic plate reverb emulation
• Based on the legendary EMT 140 record reverberator
• Controls: High pass, time, pre delay, mix and volume
• Power consumption: 62 mA
• Power supply via 9-18 V DC power supply unit (coaxial connection - negative polarity, not included - suitable power supply unit: Article number 409939)
• Made in USA

• Distortion
• A specially designed Rangemaster-based booster combined with the pre-amp section of a Laney supergroup
• Turns every guitar into a "rig of doom"
• Controls: Range, Gain, Presence and "Vol 4"
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included in delivery, e.g. Art. 409939)
• Power consumption: 5 mA
• Made in USA

• Emulation of the coveted Binson Echorec disc echo device: the same concept with four playback heads, but with an extended delay time of 40 ms -1000 ms
• Controls: Swell, Tone, Delay Time, Mix
• 12 Position switch
• Power consumption: 60 mA
• Power supply with 9 - 18 V DC power supply (coaxial connection - negative polarity inside, not included, suitable power supply: Art. 409939)
• Made in USA

• An exact reproduction of the sound of the iconic 1970s Maestro Echoplex EP-3 tape echo
• High gain silicon transistor record and playback amplifier and feedback loop for an authentic big & warm feel
• Controls: 6-Way mode switch, depth -record level, echo volume, echo sustain, echo delay
• Hand switch: VD/Exp
• LED: Echo Osc., Effect On/Off
• Footswitch: Effect bypass, echo osc.
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Expression input: 6.3 mm stereo jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 200 mA
• Power supply via 9 V battery or 9 V DC power supply unit, suitable power supply unit article no. 409939, not included in the delivery
• True Bypass
• Made in USA

Catalinbread CB Tap Tempo; external compact foot switch for the Catalinbread Belle Epoch Deluxe; for controlling the tempo of delay and modulation effects or any other pedal that requires a normally open switch; compatible with many standard pedals; includes Catalinbread-branded 6 inch 1/4” TRS patch cable; requires no power supply; Made in USA.