Cranborne Audio

Cranborne Audio N22; analog signal distributor via Cat5 cable; up to 100 m transmission range; 2 XLR inputs, 2 XLR or 2 trs jack outputs; 1 RJ45 input and 1 RJ45 output

• With integrated 8 In / 8 Out ADAT expander
• 8 I/O channels with XLR
• 8 Channel discrete analogue summing unit
• Reference AD/DA converter
• 8 In / 8 Out ADAT
• Additional insert per channel
• Individual signal routing
• Bypass switch per channel
• C.A.S.T. system for transmission of 4 balanced, analogue audio channels via one Cat5 line
• Transducer dynamic range: 121 dB(A) according to AES17, 20 Hz - 20 kHz
• Frequency response: -1 dB, 2.2 Hz to > 80 kHz
• THD+N:
• Dimensions (W x H x D): 481 x 185 x 219 mm
• Weight: 6.4 kg

• Microphone preamp with Camden preamp
• Linear and transparent microphone preamplifier
• With discrete analog saturation circuit for sound colouring
• Hi-Z input
• Headphone amplifier with independent mixes
• C.A.S.T. interface
• Equivalent self-noise (ON):
• Frequency response: ± 0.7 dB ( 1000 kHz, 35 dB gain)
• Phase deviation:
• THD + N:
• Format: 9.5"/ 1 U
• Weight: approx. 2.8 kg

Cranborne Audio Cranborne Audio N22H; Headphone amplifier for C.A.S.T. systems; analog signal distribution via Cat5 cable; up to 100 m transmission range; 2 XLR inputs, 2 jack outputs and one headphone output; one RJ45 input and one RJ45 output; Power supply via 9 V battery (not included) or via 9 V DC power supply unit

• 8 I/O channels with XLR
• USB audio interface with 28 in / 30 out
• Monitor controller
• 8 Channel discrete analogue summing mixer
• Reference AD/DA converter
• Latency-free monitor mixer with volume and pan controls per channel
• 2 Monitor outputs: Speaker A outs & Speaker B outs
• Mono sum, mute, dim and talkback function
• 28-segment LED metering
• additional insert per channel
• individual signal routing
• Bypass switch per channel
• C.A.S.T. system for the transmission of 4 balanced, analogue audio channels via one Cat5 line
• Driver dynamic range: 121 dB (A) to AES17, 20 Hz 20 kHz
• Frequency response: -1dB, 2.2 Hz to > 80 kHz
• THD+N:
• Dimensions (W x H x D): 481 x 185 x 219 mm
• Weight: 7 kg

• Two-channel microphone preamplifier with Camden preamps
• Linear and transparent microphone preamplifier
• Additional 2 discrete analog saturation circuits for sound colouring
• Hi-Z input
• 2 x Headphone amplifiers with independent mixes
• C.A.S.T. interface
• Equivalent self-noise (ON):
• Frequency response: ± 0.7 dB ( 1000 kHz, 35 dB gain)
• Phase deviation:
• THD + N:
• Dimensions: 19"/ 1 U

• Linear, transparent microphone preamplifier
• 2 Discrete analogue saturation circuits for sound colouring
• THD+N: 0.0002 %.
• Frequency and phase linearity: Frequency response ±0.7 dB from 5 Hz to 200 kHz at max. gain and
• Front-End topology with 68.5 dB gain across all 12 gain steps
• 3-Way input selector switch (Mic, line and instrument)
• Line recordings with +26.5 dBu input headroom
• DI input in BJT design and 1.5 MOhm input impedance
• Needs a 500 slot
• Form factor: 500 Series module

Cranborne Audio N8; passive audio signals distributon hub via Cat 5; 8 inputs and 8 outputs via DB25 (Tascam); 4 RJ45 inputs; compatible with all Cranborne Audio C.A.S.T.-enabled devices, including N22, N22H, Camden EC1, and Camden EC2 (not included)