Kemper

Bundle offer comprising

• Kemper Profiling Amplifier Head BK + Remote Control

The Kemper Profiling Technology allows you to create precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such as multiple stomp effect emulations (up to 4 simultaneously), master effects, equalizer, gain, amp definition, power sagging etc. The Kemper Profiling Amplifier is already delivered with several painstaking amp profiles on board so you don't necessarily have to make your own profiles. For the first time it is now possible to take a precise snapshot of your own amplifier sound, modify it (if desired) and use it for practice in the studio or on stage without carrying heavy equipment.

• Dimensions (W x H x D): 396 x 214 x 165 mm
• Weight: 5.4 kg
• Colour: Black
• Incl. Remote Control base board

Connections:

• Mic input
• Line in
• Alternative input
• Direct Out
• Monitor Out
• Master Out (jack and XLR)
• S / PDIF digital input and output
• MIDI In/Out/Thru
• 2 x Foot switches (jack)
• Network
• USB

• USB Stick
• More than 130 official amp sounds for Kemper on USB stick
• Made in a professional recording studio
• To use only with a Kemper amp

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

Bundle offer comprising

• Kemper Profiler Stage

The Kemper profiling technique allows the creation of a very precise sonic image (profile) of an existing amplifier configuration (including cabinet and microphone pickup). Thanks to the many internal processing options such as various ground effect emulations (up to 4 at a time), master effects, equaliser, gain, amp definition, power sagging etc., the sound created can then be processed far beyond the possibilities of the original amplifier. However, the Kemper Profiling Amplifier is also already delivered with a large number of outstanding amplifier profiles, which is why it is not absolutely necessary to create your own profiles. This makes it possible from the first time to exactly reproduce the sound of your own amplifier, to modify it (if desired) and to have it available for practising, in the studio or on stage without a lot of lugging around.

• Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard
• Complete Profiler with the same functions and legendary sound of the well-known Profiler Head
• The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs
• Backlit display that is easy to read even in sunlight
• Dimensions (W x D x H): 47 x 26 x 8.5 cm
• Weight: 4,6 kg
• Matching case: Art.471009 (not included in delivery)

Connections:

• Input: 6.3 mm jack
• Return 1-4: 4x 6.3 mm stereo jack
• Main Out L & R: 2x XLR / 6.3 mm jack
• Monitor Out L & R: 2x 6.3 mm jack
• Send 1 & 2: 2x 6.3 mm jack
• Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack
• Headphone Out: 3.5 mm stereo jack
• MIDI In/Out/Thru
• S/PDIF In/Out
• USB

• Transport Bag
• For Kemper Profiler Stage
• Durable, water-repellent fabric
• Additional laptop/accessory compartment
• Handle & shoulder strap
• Dimensions (W x D x H): 500 x 100 x 270 mm
• Weight: 1.6 kg

Bundle offer comprising

• Kemper Profiler Stage

The Kemper profiling technique allows the creation of a very precise sonic image (profile) of an existing amplifier configuration (including cabinet and microphone pickup). Thanks to the many internal processing options such as various ground effect emulations (up to 4 at a time), master effects, equaliser, gain, amp definition, power sagging etc., the sound created can then be processed far beyond the possibilities of the original amplifier. However, the Kemper Profiling Amplifier is also already delivered with a large number of outstanding amplifier profiles, which is why it is not absolutely necessary to create your own profiles. This makes it possible from the first time to exactly reproduce the sound of your own amplifier, to modify it (if desired) and to have it available for practising, in the studio or on stage without a lot of lugging around.

• Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard
• Complete Profiler with the same functions and legendary sound of the well-known Profiler Head
• The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs
• Backlit display that is easy to read even in sunlight
• Dimensions (W x D x H): 47 x 26 x 8.5 cm
• Weight: 4,6 kg
• Matching case: Art.471009 (not included in delivery)

Connections:

• Input: 6.3 mm jack
• Return 1-4: 4x 6.3 mm stereo jack
• Main Out L & R: 2x XLR / 6.3 mm jack
• Monitor Out L & R: 2x 6.3 mm jack
• Send 1 & 2: 2x 6.3 mm jack
• Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack
• Headphone Out: 3.5 mm stereo jack
• MIDI In/Out/Thru
• S/PDIF In/Out
• USB

• Bag for Effect Pedals
• Softly padded
• 1 Long outer pocket
• 3 Plastic feet
• Detachable carrying strap with metal snap hook
• 1 Handle
• Dimensions inside (W x D x H): 550 x 305 x 105 mm
• Colour: Black

Suitable for the pedalboards:

• Boss GT-100
• Boss GT-10
• Boss GT-8
• Boss GT-6
• Boss ME-50
• Boss ME-80
• Digitech GNX 1/2/3/4
• Digitech GNX 3000
• Digitech RP500
• Digitech RP1000
• Line6 Pod XT Live
• Line6 X3 Live
• Line 6 HD 500
• Roland FC300
• Toneworks AX3000G
• Tc electronic G-System
• Vox Tonelab LE
• Zoom GFX8

Bundle offer comprising

• Kemper Profiler Stage

The Kemper profiling technique allows the creation of a very precise sonic image (profile) of an existing amplifier configuration (including cabinet and microphone pickup). Thanks to the many internal processing options such as various ground effect emulations (up to 4 at a time), master effects, equaliser, gain, amp definition, power sagging etc., the sound created can then be processed far beyond the possibilities of the original amplifier. However, the Kemper Profiling Amplifier is also already delivered with a large number of outstanding amplifier profiles, which is why it is not absolutely necessary to create your own profiles. This makes it possible from the first time to exactly reproduce the sound of your own amplifier, to modify it (if desired) and to have it available for practising, in the studio or on stage without a lot of lugging around.

• Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard
• Complete Profiler with the same functions and legendary sound of the well-known Profiler Head
• The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs
• Backlit display that is easy to read even in sunlight
• Dimensions (W x D x H): 47 x 26 x 8.5 cm
• Weight: 4,6 kg
• Matching case: Art.471009 (not included in delivery)

Connections:

• Input: 6.3 mm jack
• Return 1-4: 4x 6.3 mm stereo jack
• Main Out L & R: 2x XLR / 6.3 mm jack
• Monitor Out L & R: 2x 6.3 mm jack
• Send 1 & 2: 2x 6.3 mm jack
• Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack
• Headphone Out: 3.5 mm stereo jack
• MIDI In/Out/Thru
• S/PDIF In/Out
• USB

• Transport Case
• Suitable for Kemper Profiler Stage
• Offers optimal protection
• Material: Laminated multiplex
• 1 Case handle
• 2 Butterfly latches
• Interior with foam
• External dimensions (W x D x H): 510 x 350 x 140 mm
• Weight: 9 kg
• Colour: Black

The Kemper profiling technology allows the creation of a very precise sound image (profile) of an existing amplifier configuration (including speaker and microphone position). Thanks to the many internal processing possibilities, such as various stomp emulations (up to 4 simultaneous), master effects, equalizer, gain, amp definition, power sagging, etc., one can process the sound far beyond the possibilities of the original amplifier. However the Kemper Profiling Amp is also supplied with a large number of outstanding amplifier profiles, making the creation of custom profiles not absolutely necessary. Thus for the first time it is possible to accurately reproduce the sound of the amplifier of your choice, to modify it if you wish, and have it available for practicing, in the studio or on stage without the need for great effort.

• Dimensions (W x H x D): 396 x 214 x 165 mm
• Weight: 5.4 kg
• Colour: White
• Incl. remote control footboard

Connections:

• Mic input
• Line in
• Alternative input
• Direct out
• Monitor out
• Master out (jack and XLR)
• S/P DIF digital input and output
• MIDI In/ out/ thru
• 2 Foot switch connections (jack)
• Network
• USB

But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Power rack version with 600 watt class D amplifier
• Power: 600 watts into 8 ohms, 300 watts into 16 ohm
• Format: 19 "/ 3 HE
• Dimensions (W x H x D): 48.3 x 13.9 x 22 cm (as the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Weight: 6.18 kg
• Colour: Black

Collections:

• Mic input
• Line In
• Alternative input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S / PDIF digital input and output
• Midi In / Out / Thru
• 2 x Footswitch (jack)
• Network and USB

The Kemper profiling technique allows the creation of a very precise sonic image (profile) of an existing amplifier configuration (including cabinet and microphone pickup). Thanks to the many internal processing options such as various ground effect emulations (up to 4 at a time), master effects, equaliser, gain, amp definition, power sagging etc., the sound created can then be processed far beyond the possibilities of the original amplifier. However, the Kemper Profiling Amplifier is also already delivered with a large number of outstanding amplifier profiles, which is why it is not absolutely necessary to create your own profiles. This makes it possible from the first time to exactly reproduce the sound of your own amplifier, to modify it (if desired) and to have it available for practising, in the studio or on stage without a lot of lugging around.

• Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard
• Complete Profiler with the same functions and legendary sound of the well-known Profiler Head
• The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs
• Backlit display that is easy to read even in sunlight
• Dimensions (W x D x H): 47 x 26 x 8.5 cm
• Weight: 4,6 kg
• Matching case: Art.471009 (not included in delivery)

Connections:

• Input: 6.3 mm jack
• Return 1-4: 4x 6.3 mm stereo jack
• Main Out L & R: 2x XLR / 6.3 mm jack
• Monitor Out L & R: 2x 6.3 mm jack
• Send 1 & 2: 2x 6.3 mm jack
• Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack
• Headphone Out: 3.5 mm stereo jack
• MIDI In/Out/Thru
• S/PDIF In/Out
• USB

But what if you want to place the factory sound with your own favourite personal sounds? Before the appearance of the Kemper Profiling Amps there were basically not many alternatives: you could either drag (before the digital revolution) all of your equipment from place to place, or you could do your best to adapt the factory sounds of the modelling amp as much as possible to your own desires.

Kemper forges a new path here. Instead of the predefined emulation of different amp models generally in use, the Profiling Amp creates (hence the name) an exact image of the amp sounds together with the connected box and microphone. Thus combining all personal favourite sounds in one unit. In addition, the sound profile can be modified with various ground-effect emulations, Master effects, Equalizer, etc. A separate amp armada is not a mandatory requirement, because the Profiling Amplifier is already delivered with a large number of classic amplifiers profiles. In addition, a large Kemper community is now well established, exchanging sound profiles on the Internet from all over the world.

• Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
• Weight: 5.32 kg
• Colour white
• Mic input
• Line In
• Alternative input
• Direct Out
• Monitor Out
• Master Out (jack
• S / PDIF digital input and output
• Midi In / Out / Thru
• 2x foot switch (TRS)
• Network

• For the Kemper Profiler Rack & Head
• Large backlit display
• Sturdy metal housing
• Five buttons for direct rig selection
• Direct access to tuner, tap tempo and looper via dedicated buttons
• Single-cable solution
• Cable with length of up to 100 metres is possible
• 4 Additional pedals can be connected
• Controls: Contrast
• Footswitch: Rig Buttons 1-5, Tap, Up, Down, Effect Buttons 1-4, Tuner, Looper
• Connectors: Pedal 3-6 (4 x 6.3 mm stereo jack), Network
• Dimensions (W x D x H): 42 x 18 x 8 cm
• Weight: 3 kg
• 7 m connection cable included

Bundle offer comprising

• Kemper Profiling Amp Head Bk + Remote Control

The Kemper profiling technology allows the creation of a very precise sound image (profile) of an existing amplifier configuration (including speaker and microphone position). Thanks to the many internal processing possibilities, such as various stomp emulations (up to 4 simultaneous), master effects, equalizer, gain, amp definition, power sagging, etc., one can process the sound far beyond the possibilities of the original amplifier. However the Kemper Profiling Amp is also supplied with a large number of outstanding amplifier profiles, making the creation of custom profiles not absolutely necessary. Thus for the first time it is possible to accurately reproduce the sound of the amplifier of your choice, to modify it if you wish, and have it available for practicing, in the studio or on stage without the need for great effort.

• Dimensions (W x H x D): 396 x 214 x 165 mm
• Weight: 5.4 kg
• Colour: White
• Incl. remote control footboard

Connections:

• Mic input
• Line in
• Alternative input
• Direct out
• Monitor out
• Master out (jack and XLR)
• S/P DIF digital input and output
• MIDI In/ out/ thru
• 2 Foot switch connections (jack)
• Network
• USB

• Case for Kemper Amps with a Foot Switch
• Double door case suitable for a Kemper Profiling amplifier PowerHead and the Profiler Remote Control foot switch
• Material: 7 mm Birch plywood
• With phenolic resin
• 22 x 22 mm Aluminium profile
• 4 Mini butterfly catches
• 2 Folding handles
• 1 Strap handle
• 4 Rubber feet
• Steel ball corners
• With an additional compartment for a remote control
• Foam padding covering the entire inside of the case
• Outer dimensions (W x D x H): 500 x 320 x 380 mm
• Weight: 8.7 kg
• Manufactured in Germany

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Powerhead version with 600 watt class D amplifier
• 600 watts into 8 ohms, 300 watts into 16 ohm
• Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
• Weight: 6.5 kg
• Colour: Black

Connections:

• Mic input
• Line In
• Alternative input
• Direct out
• Monitor out
• Master out (Jack & XLR)
• S / PDIF digital input and output
• Midi In / Out / Thru
• 2 x footswitch (jack)
• Network & USB

Since the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.

But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
• Weight: 5.32 kg
• Colour: Black

Connections:

• Microphone input
• Line input
• Alternative input
• DI output
• Monitor output
• Master output (jack and XLR)
• S / PDIF digital input and output
• MIDI In / Out / Thru
• 2 Inputs for footswitch (jack)
• Ethernet port
• 2 USB ports

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
• Weight: 5.5 kg
• Format: 19"/ 3 U (since the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (jack)
• Network
• USB

Bundle offer comprising

• Kemper Profiler Stage

The Kemper profiling technique allows the creation of a very precise sonic image (profile) of an existing amplifier configuration (including cabinet and microphone pickup). Thanks to the many internal processing options such as various ground effect emulations (up to 4 at a time), master effects, equaliser, gain, amp definition, power sagging etc., the sound created can then be processed far beyond the possibilities of the original amplifier. However, the Kemper Profiling Amplifier is also already delivered with a large number of outstanding amplifier profiles, which is why it is not absolutely necessary to create your own profiles. This makes it possible from the first time to exactly reproduce the sound of your own amplifier, to modify it (if desired) and to have it available for practising, in the studio or on stage without a lot of lugging around.

• Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard
• Complete Profiler with the same functions and legendary sound of the well-known Profiler Head
• The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs
• Backlit display that is easy to read even in sunlight
• Dimensions (W x D x H): 47 x 26 x 8.5 cm
• Weight: 4,6 kg
• Matching case: Art.471009 (not included in delivery)

Connections:

• Input: 6.3 mm jack
• Return 1-4: 4x 6.3 mm stereo jack
• Main Out L & R: 2x XLR / 6.3 mm jack
• Monitor Out L & R: 2x 6.3 mm jack
• Send 1 & 2: 2x 6.3 mm jack
• Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack
• Headphone Out: 3.5 mm stereo jack
• MIDI In/Out/Thru
• S/PDIF In/Out
• USB

• Flight Case
• Suitable for the Kemper Profiler Stage plus a suitable Mission Engineering EP1 expression pedal (Article Nr 367866 (not included))
• Material: 6.8 mm Coated birch plywood
• 22 x 22 mm Aluminium edges
• 2 Small, spring-loaded butterfly latches
• 1 Leather handle
• 8 Small ball corners
• 4 Rubber feet: 38 x 10 mm
• Foam padding
• Removable lid
• Device can be operated from inside of the lower section
• External dimensions (W x D x H): 684 x 426 x 146 mm
• Weight: 6.2 kg
• Colour: Green
• Made in Germany

• Expression Pedal
• With integrated switch specifically for using with the Kemper Profiler
• Linear potentiometer for a precise and natural adjustment that is calibrated to match exactly the specifications of the Kemper Profiler
• Integrated toe switch effects on and off without requiring a separate foot switch
• Works with all Kemper Profiler models
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.43 kg
• Colour: Green

Bundle offer comprising

• Kemper Profiling Amplifier Power Rack + Remote Control

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
• Weight: 5.5 kg
• Format: 19"/ 3 U (since the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (jack)
• Network
• USB

• Transport Case
• Suitable for Kemper Profiling Amp Rack BK Set (Kemper Profiling Amplifier Rack BK + Remote Control)
• Made of 7 mm birch plywood
• Phenolic resin coating
• 22 x 22 mm aluminium profile
• 4 Mini butterfly latches
• 2 Folding handles
• 4 Rubber feet
• Steel ball corners
• Additional compartment for remote control
• Foam padding throughout the case
• Dimensions (L x W x H): 550 x 475 x 290 mm
• Weight: 10.8 kg
• Made in Germany

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

Since the advent of modelling technology in the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.

But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modelled sounds of the modelling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Format: 19" / 3U (since the rubber feet should not be removed for ventilation reasons, a minimumm of 4U rack is required)
• Dimensions (W x H x D): 48.3 x 13.9 x 22 cm
• Weight: 5 kg
• Colour: Black

Connections:

• Mic input
• Line in
• Alternative input
• Direct out
• Monitor out
• Master Out: Jack & XLR
• S/P DIF digital input and output
• MIDI In/Out/Thru
• 2x Footswitch (jack)
• Network & USB

Bundle offer comprising

• Kemper Profiling Amplifier Rack BK + Remote Control

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Dimensions (W x H x D): 483 x 139 x 220 mm
• Format: 19" / 3U (since the rubber feet should not be removed for ventilation reasons, a minimumm of 4U rack is required)
• Weight: 4.5 kg
• Colour: Black
• Remote control footboard included

Connections:

• Mic input
• Line in
• Alternative input
• Direct out
• Monitor out
• Master Out (Jack & XLR)
• S/P DIF digital input and output
• MIDI In/Out/Thru
• 2 x Footswitch (jack)
• Network
• USB

• USB Stick
• More than 130 official amp sounds for Kemper on USB stick
• Made in a professional recording studio
• To use only with a Kemper amp

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 396 x 214 x 165 mm
• Weight: 6 kg
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (Jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (Jack)
• Network
• USB

Bundle offer comprising

• Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.

But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Power rack version with 600 watt class D amplifier
• Power: 600 watts into 8 ohms, 300 watts into 16 ohm
• Format: 19 "/ 3 HE
• Dimensions (W x H x D): 48.3 x 13.9 x 22 cm (as the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Weight: 6.18 kg
• Colour: Black

Collections:

• Mic input
• Line In
• Alternative input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S / PDIF digital input and output
• Midi In / Out / Thru
• 2 x Footswitch (jack)
• Network and USB

• USB Stick
• More than 130 official amp sounds for Kemper on USB stick
• Made in a professional recording studio
• To use only with a Kemper amp

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

Bundle offer comprising

• Kemper Profiling Amplifier Power Rack + Remote Control

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 396 x 214 x 165 mm
• Weight: 6 kg
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (Jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (Jack)
• Network
• USB

• Case for Kemper Amps with a Foot Switch
• Double door case suitable for a Kemper Profiling amplifier PowerHead and the Profiler Remote Control foot switch
• Material: 7 mm Birch plywood
• With phenolic resin
• 22 x 22 mm Aluminium profile
• 4 Mini butterfly catches
• 2 Folding handles
• 1 Strap handle
• 4 Rubber feet
• Steel ball corners
• With an additional compartment for a remote control
• Foam padding covering the entire inside of the case
• Outer dimensions (W x D x H): 500 x 320 x 380 mm
• Weight: 8.7 kg
• Manufactured in Germany

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language