MXR

Bundle offer comprising

• Effect Pedal
• Compressor pedal for electric bass
• CHT "Constant headroom technology" for clean and clear sound quality
• Knobs for output, input, release, attack and ratio
• LED chain with 10 LED for "gain reduction" display
• Status LED
• True bypass
• Sturdy metal housing
• Operated with 9 V battery or Dunlop ECB-003 AC adapter (sold separately, not included here)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

MXR M279 Deep Phase, phaser effects pedal, expressive vintage phaser tones with fast and easy tweakability, dynamic, voice-like response to attack, FDBK knob adjusts phaser intensity, standard mode runs on 4 phase shifter stages for a smooth effect, Mode II switch selects 8 phase shifter stages for twice the number of peaks and a more animated texture, pedalboard-friendly MXR mini housing, true bypass, controls for Speed, FDBK (Feedback), Mode II switch, bypass footswitch, status LEDs, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 20 mA, dimensions (L x W x H) 90 mm x 40 mm x 55 mm, weight ca. 300 g

A classic effect from the later 70s is definitely one of the big three of the great art of flanging, because this one - in contrast to cheaper competing products - "really flanges". Adjustable in Speed, Width, Regeneration (= feedback) and Manual (= delay time), and with that, everything that sounds good is possible: From chorus-like floating sounds to the jet plane - it has everything.

But what always resonates is the warmth of the sounds, which can not be recreated by any digital all-rounder. Those who like genuinely nice, classic flanging sounds will find it hard to look past this one.

• "Sweep and Flange sounds" of the 70s
• Controls: Manual, Width, Speed, Regeneration
• LED status display
• Power adapter included

Note: Register your product at www.w-distribution.com/Warranty to extend the warranty to 4 years.

Bundle offer comprising

• Phaser Effects UnitThe MXR EVH Phase 90 can be heard in the classic Van Halen guitar style. This is how Eddie Van Halen "spiced up" his legendary Lead sound, especially on the early records. This can clearly be heard in his parade solo on "eruption".

There is, of course, only one control with which the speed of the phasing can be adjusted, everything else is set so that a really pleasant, never too intrusive effect can be achieved.

Special feature: The script switch allows the player to switch between the vintage "Script Logo" or the more modern and aggressive "Block Logo" phaser sound.

• Designed with Edward Van Halen
• Switchable vintage and modern voicings
• Very stable housing
• Eddie's typical red-white-black striped appearance
• Metal footswitch
• Speed control
• Script switch (allows you to switch between the vintage "Script Logo" or the more modern and aggressive "Block Logo" phaser sound.)
• 1 Input
• 1 Output
• Bright blue status LED

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

The MXR Distortion+ was one of the first good sounding distortion pedals in the 70s (the name distortion is actually misleading - it was one of the first overdrives).

With the MXR 78 Custom Badass Distortion, the good old tradition was combined with new, sensible features. For example, a tone control for tonal flexibility and a crunch switch provide the possibility of choosing between two different distortion characteristics.

The MXR 77 is an even more advanced version, with a 100 Hz controller that can make the sound thinner or ensure stacking wumms. The Badass always sounds tube-like and musical!

• Analogue distortion pedal
• Modified M78 pedal with additional 100 Hz cut and boost control
• Controls for output, tone and distortion
• Bumb" switch for alternative voicing with bass and mid-boost
• 2 Status LED
• Sturdy metal housing
• Operation via 9V battery or Dunlop ECB-003 AC adapter (optional, not included)

• Digital reverb with 6 modes
• Controller for Tone, Decay and Mix
• Bypass foot-switch
• Internal Mono-stereo switch
• True Bypass and optional Trails bypass
• Status LED
• 3 Bi-colour LEDs for display mode
• 100% Analog Dry Path
• 6.3 mm Stereo TRS input / output
• Can be used as mono with normal instrument cables
• 6.3 mm Expression pedal / CV input
• Power consumption: 240 mA
• Including power adapter

• Fuzz
• Vintage Silicon Fuzz circuit
• Controls for Tone, Variac, Output and Gain
• Variac regulates the input voltage between 5 V-15 V for the sound of a "dying" battery
• True bypass
• Status LED
• Metal housing
• Bypass foot-switch
• 6.3 mm Mono jack input/ output
• Power supply via 9 V battery or 9 V power supply (not included, suitable power supply available under Article Nr 409939)
• Power consumption: 17 mA
• Dimensions (L x W x H): 111 x 64 x 49 mm
• Weight: 220 g

• Bass preamp / EQ
• The circuit is based on the classic Echoplex preamp
• Flexible 3-band EQ with semi-parametric mid-range
• Bass: +15 / -7 dB at 40 Hz
• Mids: +/- 16 dB at 250 Hz to 1 kHz
• Treble: +/- 10 dB at 4 kHz
• True bypass
• Controls for Treb, Mid, Bass, Output and FreQ
• Bypass foot switch
• Status LED
• Metal housing
• 6.3 mm Mono jack input / output
• Power supply via optional 9 V DC power supply (Dunlop ECB 003, 2.1 x 5.5 mm coaxial connector, polarity (-) inside)
• Current consumption: 9 mA
• Dimensions (L x W x H): 90 x 40 x 55 mm
• Weight approx. 130 g

Note: Battery operation not supported.

Note: Register your product at https://shop.warwick.de/en/warrantyregistration and extend the guarantee to 4 years.

The Bass D.I. + combines all the requirements a modern bass player has in a DI box in one device. A preamplifier and a specially designed EQ make a start and a switchable distortion with faders and a switchable gate as well as XLR and 6.3mm outputs complete the picture.

• Very rugged housing
• 2 Metal footswitch
• Controller for clean volume, distorted volume, blend, trigger, gain, bass, mid and highs
• Switch for colour, phantom power and gate
• 1 Input
• 1 Output
• Status LED
• Distortion LED
• Gate LED

• Compressor
• Classic MXR Dyna Comp sound in a compact MXR mini housing
• The rare CA3080 'Metal Can' IC allows a quieter operation without noise, higher transparency and a wider dynamic range
• True bypass
• Controls for output, sensitivity
• Bypass footswitch
• LED status
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply via 9 V DC power supply unit (Dunlop ECB 003, not included in the delivery) with a 2.1 x 5.5 mm hollow plug, polarity (-) inside
• Power consumption: 4 mA
• Metal housing
• Dimensions (L x W x H): 90 x 40 x 55 mm
• Weight: approx. 160 g

Note: battery operation is not supported.

The MXR Vintage Phase 90 comes in the classic script logo design. This is how Eddie Van Halen "spiced up" his legendary lead sound, especially on the early records. This can clearly be heard in his parade solo on "eruption". In contrast to the popular block logo phaser, the original circuit was used here, and so the phaser sounds just like Eddie, Jimmy Page, and David Gilmour (All I can say is: "Shine On ...").

There is, of course, only one control with which the speed of the phasing can be adjusted, everything else is set so that a really pleasant, never too loud effect can be achieved. Phasers just like the classics - beam me up Scotty!

• 1974 Vintage Phase 90 Original Reissue
• Gentle, warm modulation sound
• Speed control
• Foot switch made of metal
• Sturdy metal housing
• Operation via 9V battery
• Made in USA

Note: Register your product at www.w-distribution.com/Warranty to extend the warranty to 4 years.

But modern times will not make the MXR redundant, and so the MXR Distortion M116 Fullbore Metal is a (if required) metallic-sounding knallhartes Metal Distortion unit with which you can make guitar sounds glow.

At the heart of the pedal is the sweepable mid control. Here the lava frequency can be searched for and mercilessly boosted; but of course tamer frequencies can also be selected (lowering works as well). The Fullbore Metal is therefore also versatile in all kinds of healthy hardness.

• Metal Distortion
• EQ controller with Bass, Mid, sweepable Mid-Freq and Treble head
• Volume and gain control
• Power supply via a 9 V battery (Article 132579) or 9 V power supply (Article 409939) (both not included)

• Up to 6 minutes of recording time
• Stores recorded loops even when the pedal is off
• Change the speed of recorded loops to double-speed or half-speed, or reversing them
• Unlimited overdubs
• Sampling rate: 44.1 kHz
• Storage sample rates up to 88.2 kHz
• True/Buffered bypass (switchable)
• Volume control
• REC/DUB and PLAY/STOP footswitch
• Status LEDs
• Metal housing
• 6.3 mm Mono jack input/output
• 6.3 mm CTR input for connecting a MXR M199 tap tempo footswitch
• 6.3 mm EXP input for connecting a Dunlop DVP volume (X) pedal
• Tap functionality: 1x tap for loop speed, 3 sec tap loop forward/backward and 5 sec + REC for clear loop quietly
• Powered via the included 9V DC power supply with 2.1 x 5.5 mm coaxial power connector, negative polarity (-) inside
• Power consumption: 225 mA
• Dimensions (L x W x H): 64 x 111 x 49 mm
• Weight: 0.31 kg
• Includes a Dunlop ECB003 power supply

Note: Battery operation is not supported.

Note: Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.

• Graphic 10-band equalizer
• / -12 dB boost or cut per frequency band
• 2 Outputs for splitting the signal
• Low noise, true bypass
• Regulator for Volume Gain 31 Hz, 62 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz
• Illuminated sliders (status LEDs)
• Aluminum housing
• 6.3 mm mono jack input
• 2 x 6.3 mm mono jack output
• Power supply over 18 V DC Power supply Dunlop ECB-004 (2.1 x 5.5 mm hollow plug, polarity (-) inside, included)
• Power consumption: 48 mA
• Dimensions (L x W x H): 124 x 92 x 54 mm
• Weight: 700 g

• Bass Octave / Fuzz
• 2 Switchable fuzz sounds
• True Bypass
• Controls for Gain, Fuzz, Sub Octave, Dry, Bass, Treble and Mid + Level
• Fuzz switch to select between the 2 Fuzz circuits
• Bypass foot switch
• Octave foot switch
• Metal housing
• Power supply with 9 V battery or via 9 V DC power supply (Dunlop ECB 003, 2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)
• Current consumption 55 mA
• Dimensions (L x W x H): 124 x 92 x 54 mm
• Weight: 700 g

Together with the decent phase 90, which was only equipped with a speed controller, the phase 100 is probably THE vintage phaser effect. The classic phasing sounds of the 70s are not a problem, but Eddie Van Halen liked to "spice" his legendary lead sound - especially on the early records - with an MXR phaser

The MXR 100 can be used with a rotary switch to set different waveforms, which allows for more spectacular and modern phasing sounds.

• 4-Way rotary switch
• 4 Different intensity levels selectable via 4-way rotary switch
• Can be operated via a power supply or with a 9V battery
• Status LED

Even the color indicates the direction in which this pedal is headed: The MXR Custom Shop GT-OD 193 is a hot-sounding overdrive that produces harmonic distortion and for sustain rich sounds with little discoloration. Like all "green" overdrives, it is also well suited for little gain with higher volume; Thus also a good choice as a booster.

• Warm and classic overdrive sounds
• From crunchy rhythm sounds to fat harmonious lead sounds with a lot of sustain
• 9 Volt power supply available under Art.409939

Bundle offer comprising

• Effects Pedal
• Analog delay
• Up to 600 ms delay time
• Analog signal path
• True Bypass
• Controls for Delay, Regen and Mix
• Foot switch from metal
• Sturdy metal housing
• Runs on 9 V battery or via the Dunlop ECB-003 AC adapter (not included)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

• Overdrive / Distortion
• Offers a wide range of clear, transparent overdrive sounds
• For boost with tone colouration up to 'blown-tube' distortion
• Integrated charge pump for more headroom
• Selectable bypass (True / Buffered)
• Volume, Tone and Drive controls
• Buffer switch
• Bypass footswitch
• Status LEDs
• Metal housing
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply via 9V DC power supply (Dunlop ECB 003) with 2.1 mm x 5.5 mm barrel connector, polarity (-) inside - power supply not included in the delivery
• Power consumption: 18.5 mA
• Dimensions (L x W x H): 90 x 40 x 55 mm
• Weight: 130 g

Note: Battery operation not supported.

Effects UnitThe Vintage Phaser effect, just like the MXR back in the day. There is, of course, only one control with which the speed of the phasing can be adjusted, everything else is set in order to achieve a really pleasant, never too intrusive-sounding effect. The classic phasing sounds of the 70's were often created with this piece of equipment. This is how Eddie Van Halen "spiced up" his legendary Lead sound, especially on the early records. This can clearly be heard in his parade solo on "eruption".

• Rugged metal casing
• Non-slip rubber base
• Phaser with "Speed control
• Power supply: 9V battery or optional power supply available