One Control

One Control Iguana Tail Loop MKIII - 5-Channel Loop Switcher with BJF Buffer; 5-channel true bypass loop switcher for effects pedals, footswitches provide control over five independent loops and a separate tuner output, high quality BJF Buffer (switchable), 7 x DC barrel plug outputs (2.1 x 5.5 mm) for power through connection, true bypass, 6 footswitches (Loop 1, Loop 2, Loop 3, Loop 4, Loop 5, Tuner Out/Mute), status LEDs, metal housing, 6.3 mm mono jack inputs / outputs, power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside, passive operation possible without power supply (status LEDs, BJF bufffer and DC barrel plug outputs without function), battery operation not supported, current draw max. 13 mA, dimensions (L x W x H) 41 x 376 x 46 mm / 1.61" x 14.8" x 1.81", weight 450 g / 0.99 lbs

One Control Crimson Red Bass Preamp, bass preamp effects pedal, reproduces the iconic old school 60s / 70s electric bass sound, powerful low-end, similar to a single 15" or 18" woofer setup, designed by Bjorn Juhl, true bypass, controls for Volume, Brilliance, Gain, bypass footswitch, status LED, brushed aluminum housing, 6.3 mm mono in / output jacks, power supply via 9V battery or optional 9 - 15V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center (battery is not included in the delivery), current draw 1 mA, dimensions (L x W x H) 100 x 47 x 46 mm / 3.93" x 1.85" x 1.81", weight ca. 160 g / 0.35 lbs

• Programmable 5-channel true bypass loop switcher for effects pedals
• The foot switches provide control over five independent loops and a separate tuner output
• Extremely simple and intuitive programming
• 15 Freely configurable presets (3 banks, 5 presets per bank)
• 2 Selectable switching modes (recall mode, direct mode)
• Integrated BJF buffer circuit with separate inputs and outputs
• Separate loop can be used as an amp footswitch (NO / NC)
• 6 DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply
• True bypass
• 6 Foot switches (Bank PGM 1 / L 1, PGM 2 / L 2, PGM 3 / L 3, PGM 4 / L 4, PGM 5 / L 5, Mute / Tuner Out)
• Programming lock switch
• 5 Push buttons for programming the presets
• Status LEDs
• 6.3 mm Mono jack inputs / outputs
• Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside - not included)
• Power consumption max. 200 mA
• Metal housing
• Dimensions (L x W x H): 60 x 440 x 50 mm
• Weight: 705 g

Note: Battery operation not supportedNote: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• Can send Program Change / Patch Change (PC) and Control Change (CC) commands
• 128 Presets in 64 banks
• 2 Presets per bank
• Each preset has 5 PC and 5 CC numbers
• Selection of presets possible via MIDI input
• 4 Foot switches (1, 2, Down / Channel, Up / Bank)
• 1 x 5-pin MIDI input
• 2 x 5-pin MIDI output
• Power supply via optional 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Current consumption: max. 30 mA
• Metal housing
• Dimensions (L x W x H): 94 x 109 x 53 mm
• Weight: 320 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• Footswitches provide control over 10 independent loops and a separate tuner output
• Extremely simple and intuitive programming
• Winglink iOS app for programming and remote control
• 168 Freely configurable presets - 24 banks, 7 presets per bank
• 2 Selectable switching modes: Program Mode, Direct Mode
• Integrated BJF buffer circuit with separate inputs and outputs
• 7 Serial loops and 3 separate loops
• 3 Separate footswitch connections and an 8-pin DIN connector can be used as an amp footswitch
• Fully MIDI-capable with MIDI Out and MIDI In
• True Bypass
• 11 Footswitches: PGM1/L1, PGM2/L2, PGM3/L3, PGM4/L4, PGM5/L5, PGM6/L6, PGM7/L7, Bank Up/L8, Bank Dn/L9, Mute/L10, Direct
• 10 Keyswitches for programming the presets
• 5 Switches control the footswitch connections
• 4 Multi-function footswitches
• Bluetooth on/off switch
• Status LEDs
• Metal housing
• 6.3 mm Mono jack inputs / outputs
• 5-Pin MIDI input / output
• Power supply via 9V DC power supply unit with 2.1 x 5.5 mm barrel connector, polarity (-) inside (not included in delivery)
• Power consumption: max. 400 mA
• Dimensions (L x W x H): 100 x 440 x 64 mm
• Weight: 1.34 kg

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.