Palmer

Palmer vils; passive 1-channel line isolator; aluminum and steel housing; for connecting a laptop or consumer audio device to a professional microphone input; mixes two input channels (e.g. laptop headphone output) to mono; galvanic isolation by transformer ensures interference-free sound; optimal matching of level and impedance; balanced output allows longer cable runs without interference; transformer isolated; ground lift switch; connections: Input: 2x unbalanced RCA, output: 1x balanced XLR; transformer ratio: 1:1; no power supply necessary; dimensions (WxHxD): 50 x 140 x 68 mm; weight: 0.39 kg; included in delivery: 1x Palmer vils, 1x label (tour label), 1x rubber feet; engineered in Germany

• Audio distribution
• Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated
• 2 x Inputs: XLR / f (one balanced input for microphone and line level, optionally switchable)
• GND lift switch
• Outputs: 20 XLR / m, transformer-balanced with GND-lift switch, Nominal output level: +4 dBu at 0 dB
• Display of the LED chain
• Maximum output level: +20 dBu
• Nominal output impedance: 300-ohm
• 2 x Stereo connector balanced / unbalanced, nominal level -10dBu
• 2 x RCA jack unbalanced isolated / ungrounded, nominal level -10dBu
• Headphone output
• Power supply +/- 12VDC or 230VAC
• Size: 19"/ 3U
• 5 Years manufacturer's guarantee

Palmer PCAB112BXCRM 1x12" Creamback Cab; Speaker Cabinet for Electric Guitar; Equipped With: Celestion G12M-65 Creambackspeaker/s; Cabinet Construction: Open Back65Watts; Impedance: 8 Ohms; Connectors: In & Out (2 x 1/4" Jack); Housing Material: Pressboard; Baffle Material: MDF; Front Grille: Cloth; Front loaded; Top Strap Handle; Includes: Screws; Dimensions (W x H x D): 580 x 450 x 290 mm; (22,8" x 17,7" x 11,4"); Weight: 15,6 kg (34,4 lbs); Colour: Black

• Tests 3-pin and 5-pin DMX cables for continuity
• Also suitable to test 3-pin XLR microphone cables
• Automatic test or manual pin selection
• LED display
• Power supply: 2 X AA batteries (not included)
• Dimensions: 240 x 48 x 53 mm
• Weight: 0.7 kg
• Incl. Mounting bracket

• Mono summation over switchable merge in every channel
• Switchable pad -10 dB, -20 dB, -30 dB
• Switchable gnd lift per channel
• XLR and link out per channel
• Frequency range: 10 - 40,000 Hz
• Ratio (Ratio): 10: 1
• Format: 19"/ 1 HE

• Low-noise
• 8 Balanced XLR inputs
• Each to a direct output and a transformer isolated output
• Combine 2 channels to double or sum the outputs
• Ground lift per channel
• Suitable for phantom-powered condenser microphones and DI boxes
• A total of 16 XLR outputs
• Dimensions: 19", 1 U
• Case depth: 73 mm
• Weight: 1.3 kg

Palmer PCAB112BXV30 1x12" Vintage 30 Cab; Speaker Cabinet for Electric Guitar; Equipped With: Celestion Vintage 30speaker/s; Cabinet Construction: Open Back60Watts; Impedance: 8 Ohms; Connectors: In & Out (2 x 1/4" Jack); Housing Material: Pressboard; Baffle Material: MDF; Front Grille: Cloth; Front loaded; Top Strap Handle; Includes: Screws; Dimensions (W x H x D): 580 x 450 x 290 mm; (22,8" x 17,7" x 11,4"); Weight: 15,6 kg (34,4 lbs); Colour: Black

• Speaker configuration: 2x Celestion G12M-25 Greenback
• Power handling - mono: 50 Watt / stereo: 25 Watt
• Impedance - mono: 8 Ohm / stereo: 16 Ohm
• Cabinet material: pressboard
• Baffle material: MDF
• Construction: Open
• Front loaded
• Front covering: Fabric
• Input and output: 2 x 6.3 mm jack
• Handles on the side
• Dimensions: (W x H x D): 710 x 480 x 295 mm
• Weight: 23 kg
• Colour: Black
• Includes screws

• Transformer balanced XLR outputs
• Input impedance: 68 kOhm
• Output impedance: 600 Ohm
• Ratio: 10: 1
• Max. output: +6 dB
• Ground/Lift switch
• Format: 19"/1U
• 5 Year warranty

• Drivers: 5" woofer and 0.75" soft dome tweeter
• Power: 60 W RMS bi-amping power amplifier
• Bass reflex design
• Material: birch plywood and MDF
• Frequency range: 70 - 20,000 Hz
• Max. sound pressure level: 110 dB @ 1 kHz
• Signal-to-noise ratio: 85 dB
• Balanced XLR and 6.35 mm stereo jack input
• Dimensions (WxHxD): 190 x 268 x 215 mm
• Weight: 3.95 kg
• Colour: Black

• 4 Channels
• Nominal impedance of the inputs / outputs: 200 Ohm
• Max. input: +6 dB
• Format: 19" / 1U
• On the front of each channel: One input, one parallel jack (output for looping phantom power), and two isolated transformer outputs
• All outputs are also decoupled via resistors
• 5 Year warranty

• 2 Channel active summed e.g. 2 mixing consoles to 1 PA system
• Adjustable output volume
• Switchable pad
• Mute and mono per channel
• XLR / Combi input
• XLR Input
• XLR Output
• Internal power supply
• Format: 9.5"/ 1U
• 5 Years manufacturer's guarantee

• 2-Channel splitter box 1" in 3"
• Aluminium diecast housing
• Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1
• Nominal level: 0 dB
• Maximum level: +20 dB
• Nominal impedance for inputs and outputs: 600 Ohm
• Ground lift switch
• Dimensions: 115 x 48 x 140 mm
• Weight: 0.67 kg

Palmer enz; passive 2-channel line isolation box; housing made of extruded aluminum; ideal for hi-fi, presentations and installations; reliably eliminates hum loops and noise signals; no sound losses; galvanic isolation through transformer; with ground lift switch; transformer ratio: 1:1; connections: input: 2x unbalanced RCA, output: 2x unbalanced RCA; no power supply needed; weight: 0.42 kg; dimensions (WxHxD): 50 x 140 x 68 mm; included in delivery: 1x Palmer enz, 1x rubber feet, 1x label (tour label); engineered in Germany

• Audio distributor
• Electrically isolated audio splitters e.g. for press conferences and other applications
• 1x XLR / f line in and 10x XLR / m out
• GND lift switch per input and output
• Adjustable input level with LED chain
• Adjustable headphone output
• Line bus input and output to cascade several devices
• Design: 19", 1U
• Integrated power supply
• 5 Year warranty

• Format: 9.5''/ 1 RU
• Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)
• Reduces the volume of a guitar speaker at full saturation of the tubes
• Made for 16 Ohm loudspeakers
• Bypass/ attenuator switch for fast switching between full and reduced output power
• Input: 1x 6.3 mm jack socket
• Output for loudspeaker 1x 6.3 mm jack socket in parallel
• Output impedance: 16 Ohm

• Switching system 2 amps to 1 cabinet with remote input
• 1 Instrument input: 6.3 mm jack
• 2 Outputs to the amp: 6.3 mm jack
• 2 Outputs to speaker: 6.3 mm jack
• Switchable GND / lift per channel
• Toggle switch
• Remote control connection for foot switch: 6.3 mm jack
• External 9 V power supply with 130 mA
• Input Impedance: 10 Mohm
• Output Impedance: 10 kOhm
• Dimensions: 222 x 44 x 175 mm

• For up to 3 pairs of speakers
• Output 1-3 with volume controls for level adjustment of the individual monitors
• Integrated talkback microphone with volume control and button
• Mute, mono and adjustable dim function for the three main outputs
• LED level indicator and correlation meter
• 2 Stereo inputs: 6.3 mm TRS
• 1 Stereo input: Switchable between RCA, 3.5 mm stereo jack and SPDIF
• 3 Switchable balanced outputs
• 1 CUE output
• 1 Main output
• Mono sum output for subwoofer or mono monitor
• Main and cue direct outputs
• 2 Headphone outputs with volume controls and main cue selectors
• Dimensions (WDH): 254 x 215 x 84 mm
• Weight: 1.5 kg