Strymon

• Dual Overdrive
• The hybrid approach provides the best of the analog and digital world
• The JFET stage provides exceptional response and dynamic interaction with your guitar while the incredibly powerful SHARC DSP provides detailed complexity and responsiveness
• Via Strymon Midi-Exp cable (Art.448709 - not included) you can store and load presets
• Control knobs per channel: Drive, Level & Tone
• Switches: GE/Texas/Treble, 2stage/Hard/JFET, Configure and Bright
• Expression pedal input
• True bypass
• Dimensions (D x W x H): 11.4 x 10.2 x 4.4 cm
• Incl. 9 V DC mains adapter
• Designed and made in USA

• Provides all the warmth and sonic complexity of analogue bucket brigade memory choruses and vibratos
• Favorite preset
• Stereo inputs and outputs
• Effect types: Chorus, Multi & Vibrato
• Modes: Normal, Envelope & Ramp
• Controls: Speed, Depth, Mix, Ramp Speed / Env Sens, Tone
• Type switch: Chorus / Multi / Vibrato
• Mode switch: Norm, Env, Ramp
• LED: Effect on, Favorite
• Footswitch: Effect Bypass (Ramp), Favorite
• 2x 6.3 mm jack mono / stereo input
• 2x 6.3 mm jack mono / stereo output
• Current consumption: 250 mA
• Power supply with a 9 V DC power adapter (barrel connector, socket 5.5 x 2.1 mm, negative polarity inside - not included)
• True bypass
• Dimensions (W x D x H): 102 x 114 x 44 mm
• Made in USA

Note: Battery operation is not supported

• Works with most effect pedals with 6.3 mm stereo jack MIDI connection
• Independently configurable
• Sends MIDI control change messages from a sequencer to synchronise pedal parameter changes
• Automated pedal preset changes
• Loads and saves presets or sends SysEx messages - all from the computer
• Distributes MIDI messages from a MIDI controller or interface to devices connected to the 1/4-inch jack and 5-pin DIN MIDI OUT connectors
• All MIDI data received from the pedals at the 1/4-inch jacks is merged and sent to the 5-pin DIN MIDI connector
• LED: Effect On
• Footswitch: Effect Bypass
• MIDI In & Out: 2 x 5-PIN DIN
• MIDI connection 1-4: 4 x 6.3 mmm stereo jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Power consumption: 50 mA
• Power supply via USB or a 9 V DC mains adapter (not included, suitable mains adapter: art. 409939)
• Dimensions (W x D x H): 90 x 72 x 38 mm
• Weight: 141 g
• Incl. 4 x 46 cm right angle to straight jack cable, 1 x USB Type-C to USB-A Male cable
• Made in USA

Note: Battery operation is not supported

• Offers all the functions of the multiswitch as well as advanced control for Strymon Volante, Riverside & Sunset
• 3 Switches and 3 discrete outputs that provide instant access to 3 presets for Riverside / Sunset
• Activate Presets for Sunset, Riverside & Volante at the same time (additional stereo cable required)
• Simultaneously set up multiple user-defined operations, e.g. Setting the tap tempo for Flint, favorite at El Capistan & Boost on the Riverside
• Volante users can also control the SPEED switch remotely or improve the control of Volante's reverse / pause / infinity functions for transport control or sound-in-sound mode
• Dimensions: (W x D x H): 170 x 60 x 50 mm
• Weight: 367 g
• Made in USA

Bundle offer comprising

• Effect Pedal for Electric Guitar
• Overdrive / Distortion
• Cascading amplification stages produce natural and harmonious sounds from silky, clean overdrive to extreme distortion
• The analogue JFET input stage ensures uncompromising dynamics and response
• Via Strymon Midi-Exp cable (Art.448709 - not included) you can store and load presets
• Controls: Drive, Level, Bass, Middle and Treble
• Switch: Gain, Push and Presence
• True Bypass
• Boost input for foot switch (Art.313984, not included)
• Power consumption: 250 mA
• Dimensions (W x H x D): 102 x 44 x 114 mm
• Robust and light gold anodized aluminium housing
• Includes 9 V power supply
• Made in USA

• Protective Cover
• Suitable for medium size Strymon effect pedals
• Suitable for most effect pedals with housing dimensions of approx. 115 x 100 x 47 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 76 x 96 mm
• Protects effect pedals from dirt and weather
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes QuickMount pedal mounting plate Type J for RockBoard pedalboards

• Modulation effect
• 12 Selectable modulation types
• 200 Presets
• Loop-in for connecting further effects, which can be routed variably in the effect sequence (before or after the Mobius) via switch
• LED display
• True bypass
• Controls: Type, Value, Speed, Depth, Level, Parameter 1, Parameter 2
• Switch: Stereo In/Out // Pre/Post
• LED: Effect A On, Effect B On, Tap Tempo
• Footswitch: Effect A On, Effect B On, Tap Tempo
• Power consumption: 300 mA
• Power supply via 9 V DC mains adapter (included in delivery)
• Dimensions (W x D x H): 171 x 127 x 47 mm
• Made in USA
• Includes 9 V DC power adapter

Note: Battery operation is not supported.

Connections:

• Mono/stereo input: 2x 6.3 mm jack
• Mono/stereo output: 2x 6.3 mm jack
• EXP input: 6.3 mm jack
• Midi In
• Midi Out
• Power supply connection (barrel connector socket 5.5 x 2.1 mm - negative polarity inside)

• Overdrive / Distortion
• Cascading amplification stages produce natural and harmonious sounds from silky, clean overdrive to extreme distortion
• The analogue JFET input stage ensures uncompromising dynamics and response
• Via Strymon Midi-Exp cable (Art.448709 - not included) you can store and load presets
• Controls: Drive, Level, Bass, Middle and Treble
• Switch: Gain, Push and Presence
• True Bypass
• Boost input for foot switch (Art.313984, not included)
• Power consumption: 250 mA
• Dimensions (W x H x D): 102 x 44 x 114 mm
• Robust and light gold anodized aluminium housing
• Includes 9 V power supply
• Made in USA

• Three selectable reverb types for a variety of ambient textures
• Four octaves of Karplus string synthesis with attenuation control for string/verb
• LFO section: different waveforms to modulate delay time, reverb size or filter
• Filter section with 4-pole 24dB/octave low-pass filter with variable resonance
• Harmonics section to expand the sound spectrum of the reverb
• Adjustable shimmer for additional +/- 1 octave pitch shift of the reverb
• Mica for dynamic amplification of overtones
• Adjustable size of the reverb core - increasing or decreasing the space for reflections, allowing control of the pitch of the regenerating reverb
• Infinite freezes the input signal before the reverb tank
• Stereo inputs and extensive CV control of parameters
• Independent wet and DRY level controls
• Access to four presets from the front panel
• USB port on the rear panel (firmware updates)
• 4-Bit 96kHz A/D and D/A converters
• Analogue dry signal is not converted
• Current consumption: 210 mA (+12 V) / 210 mA (-12 V)
• Width: 28 HP
• Depth: 41 mm

• Reverb
• 12 different studio class reverb machines, Rooms, Reverbs, Plates and Springs
• 300 programmable user presets
• Press-and-hold sustain and Freeze function (infinite)
• Extreme settings
• Fully controllable by midi
• Ultra low noise 24-bit 96 kHz converter
• Controller for: Decay, Pre-Delay, Mix, Tone, Mod, Low end, Mid and Size
• LED status display
• Patch display
• Stereo input and output
• Toggle switch for feedback loop
• Expression pedal input (can be saved and controlled)
• Incl. 9V power supply (female DC)
• Made in USA

• For Timeline, BigSky and Mobius
• Loop control mode (only for timeline)
• Bank mode
• Preset mode
• Tap mode
• No additional power supply required
• Incl. stereo jack cable
• Made in USA

• Eurorack module
• 4 Playback heads and 1 recording head
• 3 Modes: Echo, Sound On Sound Looper and Phrase Sampler
• Varispeed algorithm
• Self-oscillating for sound generation
• Independent spring reverb
• Integrated Sharc DSP
• Dedicated control of tape mechanics state and sound: Low Cut, Tape Age, Crinkle, Wow & Flutter, Transport Section
• Phase-aligned clock output (CLK OUT) CVs synchronized with clock input (CLK IN) CVs
• Maximum delay / loop duration: 15 Seconds at maximum speed and 2 minutes at minimum speed
• Sample Rate: 96 kHz
• Power requirement: +12 V / 210 mA / -12 V / 210 mA / +5 V / 0 mA
• Dimensions (W x D): 28 TE x 41 mm

• For Preset choice at Strymon Brigadier, Deco, DIG, El Capistan, Flint, Lex, or Riverside pedals
• Taps tempi for Strymon BigSky, Deco, DIG, Flint, Mobius & TimeLine pedals
• Also activates the Boost / Favorite circuit on the Strymon Riverside Pedal
• Connection with the supplied stereo jack cable
• No power needed

• Delay with 3 different magnet delays (drum, tape, studio), spring reverb and looper
• True Bypass
• Switchable buffered bypass
• Controls: Rec Level, Mechanics, Time, Repeats Echo Level, Low Cut, Wear, Spacing, Spring
• Pushbuttons: On, Favorite, Tap
• Switch: Type, Speed
• LED: Effect On
• Display: LED
• Foot-switch: Effect bypass
• Current consumption: 300 mA
• Powered by a 9 V DC power supply (included)
• Dimensions (W x D x H): 177 x 114 x 45 mm
• Weight: 200 g

Connections:

• 2 Inputs (6.3 mm jack)
• 2 Outputs (6.3 mm jack)
• Expression connection
• MIDI input and output
• USB
• Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside)

Note: Battery operation not possible.

• Reverb
• 3 Selectable reverb types
• Mod, Voice and Tone Sections
• Adjustable Shimmer, Glimmer, Morph & Pre- or Post-drive functions
• Adjustable Reverb Core size, Independent Reverb and Dry Level controls
• 8-Step sequencer for rhythmic pitch fluctuations of the reverb
• 16 Presets can be called from the front panel and 300 presets via MIDI
• High-impedance, extremely low-noise, discrete Class-A-JFET stereo preamplifier inputs and low-impedance stereo outputs
• Input level switch for instrument and line level signals
• Controls: Mod Speed & Depth, Decay Length & Size/Pitch, Mix Reverb & Dry, Tone Low & High Cut, Voice Interval, Shimmer
• Push buttons: Mod Target & Shape, Decay Texture & Quantize, Tone Filter Regen/Low Pass, Shimmer Input/Regen, Glimmer High Low, Drive Pre/Post, Sequence 1-8
• LED: Effect On/Sequence Step/Hold (Morph), Favorite/Sequence Tap, Infinite/Hold (Sequence), Mod Target & Shape, Decay Texture & Quantize, Tone Filter Regen/Low Pass, Shimmer Input/Regen, Glimmer High Low , Drive Pre/Post, Sequence 1-8
• Footswitch: Effect Bypass/Sequence/Step/Hold (Morph), Favorite/Sequence Tap, Infinite/hold (Sequence)
• Mono/Stereo input: 2x 6.3 mm jack
• Mono/Stereo output: 2x 6.3 mm jack
• EXP In
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Current consumption: 300 mA
• Power supply via 9 V DC power adapter (included)
• Switchable true/buffered bypass
• Dimensions (W x D x H): 178 x 114 x 44 mm
• Made in USA
• Power adapter included

Note: Battery operation is not supported

• 2 Completely independent phasers that can be operated separately: in series, in parallel or splitted
• 6-Stage phaser with smooth transition from phasing to flanging to chorus, all with adjustable resonance
• 4-Stage phaser with 3 sweep modes: Classic (traditional rising and falling LFO with voicings that change character with DEPTH knob setting), Barber (constant rising LFO with +ve or -ve polarity) and Envelope (touch-sensitive envelope), independently accessible via footswitch and set of controls
• True Bypass
• 'Voice' control morphs between phasing and flanging/chorus
• 6-Stage knob: Speed, Depth, Voice
• 4-Stage control: Speed, Depth, Mix
• Switch: Input Mono/Stereo
• Switch 6-Stage: Resonance
• Switch 4-stage: Sweep
• LED: 6-stage on, 4-stage on
• Foot switch: 6-stage bypass, 4-stage bypass
• Mono/stereo input: 6.3 mm stereo jack
• Mono/stereo output: 2x 6.3 mm stereo jack
• EXP In: 6.3 mm stereo jack
• EXP/MIDI: Connection of a Strymon MiniSwitch (art. 404546 - not included) for selecting a favourite setting, a Strymon MultiSwitch Plus (art. 465346 - not included) for access to 3 presets or a MIDI controller either to a Strymon Conduit (art. 521393 - not included) or a Strymon MIDI EXP cable (not included) for access to 300 preset memories
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside.
• Power supply with a 9 V DC mains adapter (included)
• Dimensions (W x D x H): 178 x 114 x 44 mm
• Made in USA

Note: No battery operation possible

Bundle offer comprising

• Effects pedal for electric guitar
• Provides all the warmth and sonic complexity of analogue bucket brigade memory choruses and vibratos
• Favorite preset
• Stereo inputs and outputs
• Effect types: Chorus, Multi & Vibrato
• Modes: Normal, Envelope & Ramp
• Controls: Speed, Depth, Mix, Ramp Speed / Env Sens, Tone
• Type switch: Chorus / Multi / Vibrato
• Mode switch: Norm, Env, Ramp
• LED: Effect on, Favorite
• Footswitch: Effect Bypass (Ramp), Favorite
• 2x 6.3 mm jack mono / stereo input
• 2x 6.3 mm jack mono / stereo output
• Current consumption: 250 mA
• Power supply with a 9 V DC power adapter (barrel connector, socket 5.5 x 2.1 mm, negative polarity inside - not included)
• True bypass
• Dimensions (W x D x H): 102 x 114 x 44 mm
• Made in USA

Note: Battery operation is not supported

• Protective Cover
• Suitable for medium size Strymon effect pedals
• Suitable for most effect pedals with a housing size around 115 x 100 x 47 mm
• With pedal plate for mounting on pedal boards of any manufacturer
• Offset of mounting holes (W x D): 76 x 96 mm
• Protects effect pedals from dirt and weather conditions
• Protects the settings from unintentionally shifting
• Mounts effect pedals securely on almost all pedal boards
• No permanent modifications required
• Includes universal pedal mounting plate type J and silicone adhesive pad

Bundle offer comprising

• Effect Pedal
• Dual Overdrive
• The hybrid approach provides the best of the analog and digital world
• The JFET stage provides exceptional response and dynamic interaction with your guitar while the incredibly powerful SHARC DSP provides detailed complexity and responsiveness
• Via Strymon Midi-Exp cable (Art.448709 - not included) you can store and load presets
• Control knobs per channel: Drive, Level & Tone
• Switches: GE/Texas/Treble, 2stage/Hard/JFET, Configure and Bright
• Expression pedal input
• True bypass
• Dimensions (D x W x H): 11.4 x 10.2 x 4.4 cm
• Incl. 9 V DC mains adapter
• Designed and made in USA

• Protective Cover
• Suitable for medium size Strymon effect pedals
• Suitable for most effect pedals with a housing size around 115 x 100 x 47 mm
• With pedal plate for mounting on pedal boards of any manufacturer
• Offset of mounting holes (W x D): 76 x 96 mm
• Protects effect pedals from dirt and weather conditions
• Protects the settings from unintentionally shifting
• Mounts effect pedals securely on almost all pedal boards
• No permanent modifications required
• Includes universal pedal mounting plate type J and silicone adhesive pad

• Amplifies guitar signals to modular system level
• Instrument input: 6.3 mm Jack
• 2 Line Outputs: 3.5 mm Mini jack (+18 dB)
• 2 Line inputs: 3.5 mm Mini jack (-18 dB)
• 2 Outputs: 6.3 mm Jack (L/R)
• Current consumption: +12 V Max. 10 mA, -12 V max. 10 mA, +5 V 0 mA
• Dimensions (W x D): 4 TE / HP x 38 mm