Wampler

Wampler Metaverse Multi Delay; Effects Pedal for Electric Guitar; Controls: Delay, Feedback, Tone, Modulation, Mix; Switches: Preset/Save, 11 Delayprogamme wählbar: Analog Style Delay, Modulated Analog Delay , Bucket Brigade Delay, Analog Flanger Delay, Wampler "The Doctor", Wampler "Faux Tape Echo", Wampler "Ethereal", Digital Flanger Delay, Spache Echo, Multi Head Tape Delay, Digital Delay; LED: Effect On; Footswitches: Effect Bypass; Connections: Input (1/4" Jack), Output (1/4" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 130 mA; powered by a 9 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939; True Bypass; Dimensions (W x D x H): 4.5” x 3.75” x 2.25” (114 x 95 x 56 mm); Weight: 910 g (2,01 lbs); Made in USA; Note: battery operation is not supported

• Spring reverb
• Produces longer reverb times and sounds, similar to that of larger spring reverbs
• Whereas the Mini Maux Spring Reverb sounds bigger and fuller, the housing is extremely compact
• Controls: Volume - Depth - Tone
• LED: effect on
• Footswitch: effects bypass
• Connectors: input (6.3 mm jack) - output (6.3 mm jack) - power supply port (coaxial power connector, 5.5 x 2.1 mm, negative (-) polarity inside)
• Power consumption: 64.3 - 66.1 mA
• Powered via a 9-12 V DC power supply (not included, available under Article Nr 409939)
• True bypass
• Dimensions (W x D x H): 38 x 89 x 38 mm
• Weight: 450 g
• Made in the USA

Note: Battery operation is not possible.

• V2 in a new design
• Switchable bypass (Buffer or True Bypass) and active bass, midrange, and treble controls for tonal flexibility - whether you're boosting the amp or another pedal, or using the pedal as a standalone overdrive
• Controls: Gain, Level, Treble, Mids, Bass
• Push buttons: Buffer / True Bypass
• Switch: Normal / Hot
• LED: Effect On / Off
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connector (coaxial connector 5.5 x 2.1 mm, negative polarity inside)
• Power consumption: 70 mA
• Power supply via 9 V battery or 9 V DC power supply (suitable power supply Art.409939 - not included)
• True bypass
• Dimensions: (W x D x H): 64 x 114 x 38 mm
• Made in USA

• Distortion
• Perfect for modern metal sounds
• With the clarity, articulation and ultimate distortion to get a sound wall out of the amp
• Two distortion modes for maximum versatility
• Controls: Gain, Volume, Bass, Mid & Treble
• Switch: Open / Tight
• True bypass
• Power consumption: 29 mA
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included in delivery, e.g. Art. 409939)
• Dimensions: 63.5 x 114.3 mm
• Made in USA

• V2 (new design, otherwise unchanged)
• Legendary Overdrive/Boost Sound
• Compact size
• Integrated buffer which is active even when the device is switched off
• Controls: Gain, Level, Treble
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Power supply adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Current consumption: 20 mA
• Power supply via 9 V DC power supply unit (not included in delivery, suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 38 x 89 x 38 mm
• Weight: 390 g
• Made in USA

Note: Battery operation is not supported.

• Transparent overdrive
• Very dynamic
• Controls: Bass, treble, presence, volume, gain
• Switch: Gain level, overdrive voice
• LED: Effect on
• Foot switch: Effect bypass
• 6.3 mm jack input
• 6.3 mm jack output
• Mains adapter connection (coaxial connector 5.5 x 2.1 mm, negative polarity inside)
• Power consumption: 17.3-18.8 mA
• Power supply with a 9 V battery or a 9-18 V DC power adapter (not included)
• Suitable optional power supply: Article number 409939
• Dimensions (W x D x H): 64 x 114 x 38 mm
• Made in USA

• Equaliser
• Tailored to the needs of modern musicians
• 2 Parametric center controls make it possible to precisely adjust the desired sound
• High output to boost the amp preamp
• Controls: Volume - Bass - Mid1 Level - Mid1 Freq - Mid2 Level - Mid2 Freq - Treble
• LED: Effect On
• Footswitch: Effect Bypass
• Connections: Input (6.3 mm jack) - Output (6.3 mm jack) - Power supply connector (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: max. 31.9 mA
• Power supply with a 9 V battery or a 9-18 V DC power supply (not included - suitable power supply: Art.409939)
• True bypass
• Dimensions (W x D x H): 64 x 114 x 38 mm
• Weight: 590 g
• Made in USA

Note: no battery operation possible.

• Overdrive / Distortion
• Based on the famous circuit of a classic "Nager" high-gain distortion pedal from the 1980s
• From light overdrive to rich fuzz sounds
• Three-stage gain control & two voicing options that completely change the compression and clipping of the signal
• Controls: Distortion, Volume, Filter
• Switch: Gain, Voice
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9-18 V DC mains adapter (not included in delivery - suitable mains adapter: art.409939)
• Dimensions (W x D x H): 38 x 89 x 38 mm

Note: Battery operation is not supported.

• Overdrive
• Very compact
• An extended variation of the classic "Screamer" overdrive circuit - from slight boost to full drive
• The voice switch provides more clarity, the fat switch features the sound of a classic boutique amp
• Controls: Volume, Gain, Tone
• Switch: Voice, Fat
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 11mA @ 9V, 16mA @ 18V
• Power supply via 9-18 V DC mains adapter (not included, suitable mains adapter: art. 409939)
• True Bypass
• Dimensions (W x D x H): 38 x 89 x 38 mm

Note: Battery operation is not supported.

• Overdrive
• Combines Brad Paisley's two favourite Wampler sounds in one pedal
• The no longer available Underdog on Channel 1 and the Paisley Drive on Channel 2
• Both sides can be run together with switchable order or individually with separate inputs and outputs for pedal switcher based rigs
• True bypass
• Controller Ch.1: Gain - Level - Treble - Mids - Bass
• Controller Ch.2: Gain - Level - Tone
• Buttons: Ch.1 Fat - Ch.2 Voicing
• Switch: 1 In 2/2 in 1/separate
• LED: Ch.1 Effect On/Off - Ch.2 Effect On/Off
• Foot switch: Ch.1 Effect Bypass - Ch.2 Effect Bypass
• Connections: Ch.1 and Ch.2 input (2x 6.3 mm jack) - Ch.1 and Ch.2 output (2x 6.3 mm jack) - power supply connection (coaxial socket 5.5 x 2.1 mm - negative pole inside)
• Power consumption: 39.8mA
• Power supply with a 9 V battery or 9 - 18 V DC power supply (not included - matching power supply: Article Nr 409939)
• Dimensions: (W x D x H) 114 x 89 x 38 mm
• Made in USA

• Compressor
• The Blend knob allows you to mix the unprocessed signal to get all the benefits of a compressor but with the ability to remove the "squashed" signal on impact
• Controls: Sustain, Volume, Blend
• Manual switch: Tone, Attack
• LED: Effect On / Off
• Foot switch: Effect bypass
• Connections: (6.3 mm jack), output (6.3 mm jack), power supply connection (coaxial socket 5.5 x 2.1 mm - negative pole inside)
• Power consumption: 22mA
• Power supplied by 9 - 18 V DC power supply (not included, available: Art. 409939)
• True bypass
• Dimensions (W x D x H): 38 x 89 x 38 mm
• Weight: 390 g
• Handmade in USA

Note: Battery operation not possible.

• Overdrive
• Heritage Series
• Controls: Bass, Middle, Treble, Pre-Gain, Post-Gain, Level
• Switch: Bass Boost, Bright Boost
• Footswitch: Pre-Gain, Post-Gain
• True Bypass
• Power via 9 V battery or 9 V power supply (not included, e.g. Article Nr 409939)
• Dimensions: 88.9 x 114.3 x 38.1 mm (height without switches and controllers)

• Fuzz
• With two completely different clipping options
• Classic fuzz sounds that greatly compress the bass, or tighter, more distortion-like sounds
• Controls: Volume, Fuzz and Brightness
• Switch: Big/Tight
• True Bypass
• Power consumption: 23 mA
• Power supply via 9V battery or 9V DC power supply (coaxial connection - negative pole inside, not included, corresponding item: Article Nr 409939)
• Dimensions (W x D x H): 64 x 114 x 38 mm
• Weight: 450 g
• Made in the USA

• Overdrive
• Improved plexi-drive circuit in a miniature housing with additional new functions
• Classic british stack tone
• Completely new mid boost switch produces a powerful, throaty, tube-like boost by influencing several amplification levels of the circuit simultaneously
• Controls: Gain, level, tone
• Switches: Bass boost, mid boost
• LED: Effect on
• Foot switch: Effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connector: DC socket, 5.5 x 2.1 mm (negative polarity inside)
• Current consumption: 2.3 mA
• Powered via 9-18 V DC power supply (not included)
• Suitable power supply: Article Nr. 409939 (not included)
• Dimensions (W x D x H): 38 x 89 x 38 mm
• Made in the USA

Note: Battery operation is not supported.

• Signature series
• Overdrive
• Volume control
• Gain control
• Tone control
• Presence switch
• Mid-contour switch
• True bypass
• Power supply via 9 V battery or 9 V power supply (not included, article nr 409939)
• Dimensions (W x D x H): 64 x 114 x 38 mm
• Weight: 450 g
• Hand made in USA

• Overdrive
• Andy Wood Signature Pedal
• Contains modified versions of 2 of Brian Wampler's most popular drive circuits
• Channel 1 is based on the Tumnus and channel 2 on the Pinnacle
• Top switchable sequence
• 2 Inputs and outputs
• Noise gate
• Channel 1 knob: Gain, Level, Tone
• Channel 2 control: Gain, Level, Gate, Bass, Mids, Treble
• Switch: Chain Order
• LED: Ch. 1 On, Ch. 2 On
• Foot switch: Ch.1 Bypass, Ch.2 Bypass
• Connectors: Ch. 1 & 2 input (2x 6.3 mm jack), Ch. 1 & 2 output (2x 6.3 mm jack)
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside.
• Power supply with a 9 V DC mains adapter (not included in delivery - suitable mains adapter: Art. 409939)
• Dimensions (W x D x H): 127 x 114 x 38 mm
• Made in USA

Note: No battery operation possible

The Belle's circuit is based on a popular (especially in Nashville) overdrive pedal and Brian Wampler's special version offers everything you would expect: from a warm and clean boost at low gain levels, to transparent overdrive/medium distortion at higher gain levels.

Included among Brian's improvements are additional gain capabilities and a bass control for controlling overtones, all the way from smooth and creamy to tight and crisp.

• Controls: Bass, Color, Level, Gain
• Push switch: Clipping
• Footswitch: On/Off
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power adapter connector: Barrel connector, 5.5 x 2.1 mm, negative polarity inside
• Operates via 9-18 V DC power supply unit (not included, suitable power supply available under Article Nr 409939)
• Dimensions (W x D x H): 38 x 89 x 38 mm

Note: Battery operation is not supported.

• Overdrive
• Natural & transparent sound similar to that of a tube amplifier
• Goes from clean to extremely fat with some warmth and natural overdrive
• Simply adds a little bit of dirt without changing the basic sound
• Controls: Bass, tone, gain, volume
• Switches: Smooth / Open / Crunch
• Foot switch: Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• 9 V DC power adapter connector (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: 15 mA
• Operation via 9 V battery or 9-18 V DC power adapter (not included, suitable power adapter available under article nr 409939)
• True bypass
• Dimensions (W x D x H): 64 x 114 x 38 mm (height without controller & switch)
• Made in USA

• Transparent overdrive
• Very dynamic
• Two completely independent Pantheon circuits, one as a classic blues-breaker and one with a more modern boutique sound
• With the optional independent inputs and outputs, each channel can be split into a loop switcher, a pedal or pedal chain can be inserted between the two sides, or the pedal can be connected in stereo to two amps
• Channel 1 controls: Bass, Treble, Volume, Gain
• Channel 2 control: Bass, Treble, Volume, Gain
• Channel 1 & 2 controls: Presence
• Switch: Channel Order
• LED: Effect On
• Footswitch: Effect Bypass
• Connections channel 1 In & Out: 2x 6.3 mm jack
• Connections channel 2 In & Out: 2x 6.3 mm jack
• MIDI in & out: 2x 3.5 mm stereo jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 55 mA
• Power supply via 9 V battery or 9-18 V DC power supply unit (suitable power supply unit art. 409939, not included)
• Dimensions (W x D x H): 127 x 114 x 38 mm
• Incl. MIDI adapter from 3.5 mm angle stereo jack to 5-pin DIN
• Made in USA