|
|
Lightweight 2-channel class-D power amplifier
- Power: 2x 3000 Watt at 4 Ohm, 2x 1600 Watt at 8 Ohm
- Inputs: Jack and XLR
- Outputs: Speaker-twist
- Built-in crossover
- Integrated limiter
- Mains, signal and limit LEDs
- Dimensions: 19" / 2 HE
- Housing depth: 320 mm
- Weight: 5.9 kg
|
Price History: Behringer NX6000
549.00 $ |
|
|
Power Amplifier
- Power: 2x 800 Watt/4 Ohm Peak, 2x 500 Watt/8 Ohm Peak, 1700 Watt/8 Ohm Peak bridged
- Limiter
- XLR and 6.3 mm jack inputs
- Speaker Twist & binding post outputs
- Short-circuit protection
- Design: 19"/ 2U
- Dimensions: 88 x 482 x 375 mm
- Weight: 12.5 kg
|
Price History: Behringer KM1700
255.00 $ |
|
|
Power Amplifier
- Very low installation depth: 259 mm
- Weight: Only 6 kg
- Power: 2x 1200 W at 4 ohms
- Hi-peak power up to 4500 W
- Class-D output circuitry
- Large, backlit 256p x 128p LC display
- 2 Rotary encoders and 3 buttons for quick access
- High-pass filter, 4th-order Linkwitz-Riley, adjustable frequency of 20 Hz up to 4 kHz
- Low pass filter, 4th-order Linkwitz-Riley, adjustable frequency of 60 Hz up to 4 kHz
- 4-Band parametric EQ with frequencies
- Variable gain and bandwidth
- Peak limiter: Protects the loudspeaker via the input of all individual power- and impedance data
- Delay: Max. 50 ms
- Digital gain: +10 dB / -100 dB
- 20 Presets for the most popular speaker configurations, adjustable
- Status LEDs: 2x Green: Signal / 2x Red: A/D Clip / 1x Blue: Indicates AC on
- Inputs: 2x XLR and 2x 6.35 mm stereo jack
- Outputs: 2x NL4, lockable (NL2 compatible) and 2x binding posts
- Mono- or bi-amping connector
- Protected circuit design and thermal protection
- Power supply secured in case of instable power supply
- Removable power cable (C13/safety plug)
- Dimensions (W x H x D): 483 x 89 x 259 mm
- Design: 19", 2U
|
899.00 $ |
|
|
2-Channel Class-D Amplifier with DSP
- Power: 2x 900 W at 4 Ωs, 2x 1500 W at 2 Ωs
- Inputs: 6.3 Mm jack and XLR
- Outputs: Speaker Twist
- DSP features: Delay, crossover (3 filter types, slope up to 48 dB/octave), equalizer (8 parametric, 2 dynamic), security settings
- Format: 19" / 2 RU
- Case depth: 231 mm
- Weight: 3.6 kg
|
Price History: Behringer NX3000D
399.00 $ |
|
|
Switched-mode Power Supply Power Amplifier
- 2x 910 W/ 4 ohm
- 2x 590 W/ 8 ohm
- 2x 1200 W/ 2 ohm
- 1x 1800 W/ 8 ohm (bridge mode)
- 2400/ 4 Ohm (bridge mode)
- XLR Input and output
- Speaker twist output
- Dimensions: 485 x 370 x 97 mm
- 19" / 2 RU
- Weight: 10.4 Kg
|
Price History: the t.amp TSA 2200
319.00 $ |
|
|
Stereo Power Amplifier
- Power: 2 x 1430 W at 4 ohm, 2 x 950 W at 8 ohm, 1 x 2860W at 8 ohm bridged (@1kHz, THD
- Frequency range: 20 Hz - 20,000 kHz
- XLR input and output
- Input sensitivity: 0.77 V
- Outputs: Speaker Twist and binding posts
- Protected circuit design: DC
- Short circuit protection
- Over temperature protection
- Limiter
- Amplifier class: H
- Mains power: 230 V, 50 Hz
- Dimensions (W x D x H): 482 (19") x 362 x 88 mm
- Design: 19" / 2 U
- Weight: 16 kg
|
Price History: the t.amp E-1500
266.00 $ |
|
|
Stereo Power Amplifier
- Output: 2 x 1200 W at 4 ohm, 2 x 800 W at 8 ohm, 1 x 2400 W at 8 ohm bridged (@ 1 kHz, THD)
- Frequency response: 20 - 20,000 Hz
- XLR input and output
- Input sensitivity: 0.77 V
- Outputs: Speaker Twist and binding posts
- Protected circuit design: DC
- Short-circuit protection
- Over temperature protection
- Limiter
- Amplifier class: H
- Mains power: 230 V, 50 Hz
- Dimensions (W x D x H): 482 (19") x 362 x 88 mm
- Design: 19" / 2U
- Weight: 15.28 kg
|
Price History: the t.amp E-1200
239.00 $ |
|
|
Studio Linear Amplifier
The SLA-2 is a 1 RU 19" power amplifier that is suitable for studio and live applications thanks to its SmartFan silent cooling system, meaning that the following fields of application are possible: project, home and recording studios, broadcasting/radio/TV, live/PA area, DJ sound systems, permanent/fixed installations, churches, clubs and rehearsal room PA systems. Alongside its excellent sound with minimal interference and unwanted noise, the ART SLA-2 offers the following features: - 200 Watt RMS at 8 Ohm per channel
- 280 Watt RMS at 4 Ohm per channel
- 560 Watt RMS at 8 Ohm bridged
- Frequency range: 10 Hz to 40 kHz +/- 0.5 dB
- CMMR: > 60 dB (typical @ 1 kHz)
- THD:
- Toroidal transformer
- Balanced XLR / unbalanced 6.3 mm jack inputs
- Weight: 9 kg
|
598.00 $ |
|
|
Light 4-Channel Class D Power Amplifier
- Power: 4x 860 Watt at 4 Ohm, 4x 440 Watt at 8 Ohm
- Inputs: Jack and XLR
- Outputs: Speaker-twist
- Built-in crossover
- Integrated limiter
- Mains, signal and limit LEDs
- Dimensions: 19" / 2 HE
- Housing depth: 320 mm
- Weight: 6.1 kg
|
Price History: Behringer NX4-6000
598.00 $ |
|
|
Studio power amplifier
- Convection-cooled
- Class AB
- Power: 100 W RMS at 8 Ohm
- Bridged mono: 245 W at 8 Ohm
- Frequency response: 20 Hz - 30 kHz (+/- 0.25 dB)
- THD:
- Inputs: 2x XLR female
- Outputs: 2x XLR male Link, 2x screw terminals
- Design: 19" 1U
- Dimensions (W x H x D): 482.6 x 44.5 x 260.4 mm
- Weight: 6.7 kg
|
Price History: Avantone CLA-100
585.00 $ |
|
|
DriveCore Power Amplifier
- With Class D circuit
- Amp modes: 2-channel stereo, mono bridged or Y mode
- Power rating: 2x 775 W/ 2 Ohm, 2x 525 Watt/ 4 Ohm, 2x 300 W/ 8 Ohm, bridged 1x 1550 W/ 4 Ohm, bridged 1x 1050 W/ 8 Ohm
- 24 dB Linkwitz Riley crossover
- Input sensitivity 1.4 or 0.775 V
- Big front display for easy handling
- Black out mode switches off the display automatically
- Lock out mode avoids improper use
- Remote power for remotely switching on/ off
- PeakX limiter per channel
- Quiet and temperature controlled fan
- Rugged metal housing
- 5 Status LEDs per channel
- Connectors: XLR, jack and RCA input, 2x speaker twist and binding post outputs
- Size: 19"/ 2 RU
- Installation depth: 19.6 cm
- Weight: 3.9 kg
|
Price History: Crown XLS 1502
444.00 $ |
|
|
Power amplifier
- 2 x 75 W at 4 ohms
- 2 x 45 W at 8 ohms
- Balanced inputs with XLR and jack
- Bridgeable
- Speaker Twist and terminal connections for speaker out
- All protection circuits including Softstart
- Switchable input level of -0 +4 db
- Damping factor > 150
- For all applications where no fan is desired
- 19" Rack mount 1U, depth 33 cm
- Weight: 7.5 kg
|
Price History: the t.amp S-75 MK II
118.00 $ |
|
|
2-Channel Analogue Power Amplifier
- 2x 1350 W/ 4 Ohm
- 2x 1000 W/ 8 Ohm
- 2700 W/ 8 Ohm bridge mono
- Signal-to-noise ratio > 100 dB
- Damping factor >200
- XLR/ RCA connector input
- Speaker twist and binding post outputs
- Turn-on delay
- Short-circuit protection
- 19" 2 RU
- Installation depth: 31.5 cm
- Weight: 19.5 Kg
|
Price History: Crown XLi 3500
919.00 $ |
|
|
4-Channel Digital Power Amplifier
- Class D
- Power: 4x 500 W at 4 Ohm, 4x 250 W at 8 Ohm
- Built-in DSP
- 4 XLR inputs
- 4 Speaker twist outputs
- Format: 19" / 1 U
- Dimensions: 483 x 460 x 44 mm
- Weight: 8.0 kg
|
Price History: the t.amp Quadro 500 DSP
529.00 $ |
|
|
Stereo Amplifier
- Power: 2x 500 W at 4 Ohm, 2x 350 W at 8 Ohm, 1 x 1000W bridged at 8 Ohm (@ 1 kHz, THD
- Frequency range: 20 - 20,000 Hz
- Inputs: XLR, jack (balanced)
- Outputs: Speaker Twist and binding posts
- Protected circuit design: DC
- Short circuit protection
- Protection against overheating
- Limiter
- Standby circuit
- Mains: 230 V / 50 Hz
- Dimensions (W x D x H): 482 x 375 x 88 mm
- Format: 19" / 2 U
- Weight: 12.8 kg
|
Price History: the t.amp E-800
179.00 $ |
|
|
Live Performance DSP Amplifier
- 2-Ohm stability
- Intuitive system control software for easy setup and control
- Balanced XLR in / out
- Speaker Twist connectors
- Dimensions (W x H x D): 483 x 88 x 462.4 mm
- Weight: 16.2 kg
Maximum Power Single Channel: - 2 Ohm: 2300 W
- 2.7 Ohm: 2000 W
- 4 Ohm: 1400 W
- 8 Ohm: 700 W
Maximum Power Dual Channel: - 2 Ohm: 2200 W
- 2.7 Ohm: 1800 W
- 4 Ohm: 1300 W
- 8 Ohm: 650 W
- Bridged: 4 Ohm: 4400 W
- Bridged 8 Ohm: 2600 W
|
Price History: Dynacord L2800FD DSP
1,050.00 $ |
|
|
Power Amplifier
- Power: 2x 425 W / 4 Ohm, 2x 350 W / 8 Ohm
- Inputs channel 1 and 2: 2x XLR balanced, 2x RCA and 2x 6.3 mm stereo jacks
- Outputs: Speaker Twist combo jacks to 6.35 mm jack, 2 x screw terminals
- 2 Stepped gain controls for precise adjustment
- Frequency range: 20 - 20,000 Hz
- Signal / noise ratio: 100 dB
- Integrated switchable crossover
- Guard rail technology
- Protects against overheating and overloading without disconnecting
- Protective circuits and thermal fuses
- Detachable power cable
- Very low installation depth and low weight
- Dimensions (W x H x D) 483 x 89 x 257 mm
- Format: 19" / 2 U
- Weight: 12.1 kg
|
409.00 $ |
|
|
Power Amplifier
- Format: 19" / 2 U
- 2x 300 W / 4 Ohms
- 2x 200 W / 8 Ohms
- 2x 430 W / 2 Ohms
- 1 x 830 W / 2 Ohm stereo or 4 ohm bridged applications
- Balanced TRS, XLR, and barrier strip inputs
- Mono parallel mode
- Speaker Twist and binding post outputs
- Adjustable-/ switchable HP filter
- Switchable limiter
- GND Lift
- Amplifier and circuit protection
- Quiet fan
- Weight: 15.9 kg
- Housing depth: 36 cm
- 3 Year warranty
|
Price History: QSC RMX 850a
511.00 $ |
|
|
Digital Class D Amplifier
- Power: 4x 400 W/4 Ohm, 4x 250 W/8 Ohm (RMS)
- Bridge mode: 2x 800 W/8 Ohm (RMS)
- Inputs: 4x XLR (bridge and stereo mode selectable)
- Protective devices: Short-circuit, overheat, mute on power on/off, DC voltage protection and RF protection.
- LED indicator (signal, limit, protection)
- 19'' Steel housing
- Dimensions (W x H x D): 483 x 44 x 390 mm
- Weight: 6.4 kg
- Colour: Black
|
Price History: DAP-Audio Qi-4400
431.00 $ |
|
|
Power Amplifier
- Power: 2x 400 Watt / 4 Ohm RMS, 2x 200 Watt / 8 Ohm RMS, 750 Watt /8 Ohm RMS bridged
- Limiter
- XLR and 6.3 mm jack inputs
- Speaker Twist & binding post outputs
- Short-circuit protection
- Design: 19"/ 2U
- Weight: 8.5 kg
|
Price History: Behringer KM750
195.00 $ |
|
|
4-Channel Class-D Power Amplifier
- Especially suitable for CURV 500 installations
- 4 x 240 W at 4 ohms
- 4 x 120 W at 8 ohms
- 4 x 60 W at 16 ohms
- Frequency range: 10 - 22,000 Hz
- Each channel can control up to six CURV-500 satellites or one CURV500ISUB subwoofer
- OLED display
- Protection circuits: DC, short circuit, over-current, soft start, thermal overload
- Inputs: 4 x Line, terminal block, XLR
- 4 Speaker outputs
- Dimensions (W x H x D): 482 x 44 x 420 mm
- Weight 6.8 kg
- Format: 19" / 1 U
|
Price History: LD Systems Curv 500 IAMP
955.00 $ |
|
|
Power Amplifier
- Very low installation depth: 259 mm
- Power: 2x 600 W into 4 Ohm, 2x 400 W into 8 Ohm
- Hi-Peak power: up to 1,600 W
- Class-D power amplifier circuit
- Large, illuminated 256p x 128p LC display
- 2 Rotary input knobs and 3 buttons for quick access
- High-pass filter, 4th order Linkwitz-Riley, adjustable frequencies 20 Hz to 4 kHz
- Low-pass filter, 4th order Linkwitz-Riley, adjustable frequencies 60 Hz to 4 kHz
- 4-Band parametric EQ with frequencies
- Gain and bandwidth variable
- Peak Limiter: protects speakers by entering individual power and impedance data
- Delay: maximum 50 ms
- Digital gain: +10 dB / -100 dB
- 20 Presets for the most frequently used loudspeaker configurations, adjustable
- Status LEDs: 2x green: signal/2x red: in-amp clip/1 xblue: mains power
- Inputs: 2x XLR and 2x 6.35 mm stereo jack
- Outputs: 2x NL4, lockable (NL2 compatible) and 2x screw terminals
- Mono or bi-amping connection
- Protection circuits and thermal fuses
- Power supply fused in case of unstable power supply
- Detachable mains cable (C13/grounded plug)
- Dimensions (W x H x D): 483 x 89 x 259 mm
- Construction: 19" / 2 U
- Weight: 5.1 kg
|
599.00 $ |
|
|
Amplifier with Switched-Mode Power Supply
- 2x 670 W/ 4 Ohm
- 2x 450 W/ 8 Ohm
- 2x 800 W/ 2 Ohm
- 1x 1380 W bridge at 8 Ohm
- 1x 1600 W bridge at 4 Ohm
- XLR input and output
- Speaker Twist output
- Protected circuit design: Audio limiter, temperature und short circuit
- Dimensions: 484 x 350 x 97 mm
- 19"/ 2 RU
- Weight: 10.4 kg
|
Price History: the t.amp TSA 1400
275.00 $ |
|
|
Power Amplifier
- Power: 2x 520 W @ 4 O, 2x 380 W @ 8 O
- Input sensitivity: 0.775 V
- Slew rate: 40 V/µs
- Damping factor 300:1/ 1kHz/ 8 O
- THD:
- Short circuit protection
- With limiter
- Not temperature controlled
- Inputs: jack and XLR
- Outputs: speaker twist and speaker terminal
- Dimensions (W x H x D): 483 x 103 x 475 mm
- Format: 19"/ 2 U
- Weight: 16.4 kg
|
Price History: the t.amp TA 1050 MK-X
265.00 $ |
|
|
Digital power amplifier
- Power: 2x 1050 W / 4 Ohm, 2x 800 W / 8 Ohm, 2x 600W / 2 Ohm
- Speaker presets provide an optimum loudspeaker performance
- DSP Functions
- Includes D-contour processing
- Input: XLR + jack
- Outputs: Speaker twist, jack, binding post
- Dimensions: 480 x 88 x 388 mm
- Design: 19" / 2 U
- Weight: 7.2 kg
|
Price History: Yamaha PX8
835.00 $ |
|
|
Power Amplifier
- RMS power: 2x 850 W @ 4 O, 2x 570 W @ 8 O
- Input sensitivity: 0.775 V
- THD:
- Slew rate: 40 V/µs
- Damping factor: 350:1/ 1kHz/ 8 O
- Short circuit protection
- Limiter
- Inputs: jack and XLR
- Outputs: speaker twist and speaker terminal
- Installation depth: 44cm
- Format: 19"/ 2 U
- Weight: 17.5 kg
|
Price History: the t.amp TA 1400 MK-X
306.00 $ |
|
|
Power Amplifier
- 2x 600W/4 Ohm
- 2x 380W/8 Ohm
- 2x 900W/2 Ohm
- 1x 1200W/8 Ohm bridge
- 2 Ohm compatible
- Balanced XLR in/ out
- Speaker twist out
- Ground lift
- Limiter
- LPN Filter (low pass notch) protection
- Temperature switch-off
- DC protection
- Fan
- Weight: 14.8 kg
- Dimensions: 483 x 88.1 x 421.5 mm
- Format: 19", 2 U
|
Price History: Dynacord SL1200
711.00 $ |
|
|
Power Amplifier
- 2x 1200 W/ 4 Ohm
- 2x 750 W/ 8 Ohm
- 2x 1800 W/ 2 Ohm
- 1x 2400 W/ 8 Ohm (bridge mode)
- 2 Ohm compatible
- Symmetrical XLR in/ out
- Speaker twist out
- Ground lift
- Limiter
- LPN Filter (low pass notch) protection
- Temperature switch-off
- DC protection
- Fan
- Weight: 17.7 kg
- Dimensions: 483 x 88.1 x 421.5 mm
- Format: 19", 2 RU
|
Price History: Dynacord SL2400
1,090.00 $ |
|
|
Digital Class D Amplifier
- Power: 4x 600 W/4 Ohm, 4x 360 W/8 Ohm (RMS)
- Bridge mode: 2x 1200 W/8 Ohm (RMS)
- Inputs: 4x XLR (bridge and stereo mode selectable)
- Protective devices: Short-circuit, overheat, mute on power-up and power-down, DC voltage protection and RF protection
- LED indicator (signal, limit, protection)
- 19'' Steel housing
- Dimensions (W x H x D): 483 x 44 x 390 mm
- Weight: 6.4 kg
- Colour: Black
|
Price History: DAP-Audio Qi-4600
514.00 $ |
|
|
DriveCore Power Amplifier
- With Class D circuit
- Amp modes: 2-channel stereo, mono bridged or Y mode
- Power rating: 2x 1050 Watt/ 2 Ohm, 2x 650 Watt/ 4 Ohm, 2x 375 Watt/ 8 Ohm, bridged 1x 2100 Watt/ 4 Ohm, bridged 1x 1300 Watt/ 8 Ohm
- 24 dB Linkwitz Riley crossover
- Input sensitivity 1.4 or 0.775 V
- Big front display for easy handling
- Black out mode switches off the display automatically
- Lock out mode avoids improper use
- Remote power for remotely switching on/ off
- PeakX limiter per channel
- Quiet and temperature controlled fan
- Rugged metal housing
- 5 Status LEDs per channel
- Connectors: XLR, jack and RCA input, 2x speaker twist and binding post outputs
- Size: 19"/ 2 RU
- Installation depth: 27.2 cm
- Weight: 4.9 kg
|
Price History: Crown XLS 2002
544.00 $ |