Reverb Pedals

• Spring reverb
• With two independent spring reverb channels
• Available in serial or stereo operation
• Two band EQ for the reverb signal, Gain, Mix, Output level per reverb channel
• True bypass per channel
• Inputs: Balanced XLR and 6.3 mm jack
• Outputs: Transformer-balanced XLR and 6.3 mm jack
• Integrated power adapter
• Housing: 19" / 2U

• Reverb with 3 kinds of modulation effects
• Operates digitally
• True Bypass
• Tap Tempo function
• Freeze function
• Controls: Level / Mix, Time / Tone and FB / Decay
• Toggle switch for selecting between the different modulation effect types (Flanger, Vibrato and Phaser)
• Bypass footswitch
• Metal housing
• 6.3 mm Mono jack input / output
• Powered via 9 V DC power supply, 2.1 x 5.5 mm barrel connector, negative polarity inside (not included - battery operation is not supported)
• Current consumption: 160 mA
• Dimensions (L x W x H): 93.5 x 42 x 52 mm
• Weight: 146 g

Neunaber Seraphim Shimmer V2, reverb / shimmer effects pedal, two selectable reverb and shimmer modes (original shimmer / W3T shimmer), original shimmer mode from the popular Seraphim V1, W3T shimmer algorithm is the same as the algorithm on the Immerse Mk II (Wet V3), shimmer can be added or removed from the reverb effect, the footswitch seamlessly transitions between shimmer and reverb only, full Mix knob adjustment from 0% to 100% wet, analog dry signal for low noise and zero latency, selectable trails (choose whether the effect naturally trails or cuts off abruptly after the effect is bypassed), buffered bypass, controls for Depth, Mix, Shimmer, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, current draw 100 mA, dimensions (L x W x H) 115 x 64 x 46 mm / 4.6" x 2.6" x 1.9", weight ca. 190 g / 0.42 lbs

• Multi-function stereo reveb
• 6 Selectable studio quality reverb types: Spring, Hall, Plate, BFR, RFRCT (Refract), Air
• Various modulation- and drive effects depending on the reverb type
• Enjoy delicate all the way to drastic modifications of individual parameters
• Direct access to the most important parameters
• Fine-tuning adjustments via 2 multifunctional controls
• Swell function automatically blends into the reverb
• Tune knob shapes the amount of low and high frequencies in the reverb signal
• "X" parameter controls the special functions of the individual reverb types
• Direct access to Pre Delay
• SUS/LATCH function for sustain and sample effects
• 9 Built-in presets (up to 128 via MIDI)
• Can be operated entirely via MIDI
• Controls: Decay, Swell, Mix, Tweak, Prog, Tune
• Switches: Rate/Depth/Pre Delay, A/B/C, Lo/High/X
• Footswitches: Bypass, Sus/Latch
• 2 Multi-coloured status LEDs
• 2 Mono/Stereo inputs: 6.3 mm jack
• 2 Mono/Stereo outputs: 6.3 mm jack
• MIDI In/Out: DIN plug
• 3 Various bypass modes: True Bypass, True Bypass + DSP, DSP
• Powered via 9 V DC power supply unit (negative polarity inside (not included))
• Power consumption: 300 mA min.
• Dimensions (incl. potentiometers) (W x D x H): 67 x 124.5 x 64 mm
• Weight: 0.54 kg
• Colour: Black
• Made in the USA

• Spring reverb
• 2 Reverb programs
• Switchable
• Lockable springs
• Controls for Level A, Level B, Tone A and Tone B
• Switches for reverb, select and bypass
• Power supply with 9V power supply: Article number 409939 (not included) or battery: Article number 417473 (not included)

Note: Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.

• Spring reverb with switchable effect stop before or after the reverb spiral
• Inputs: 6.3 mm jack at the front, 6.3 mm jack at the rear A / B (-20 dBu / 0 dBu)
• Outputs: 6.3 mm jack at the rear A / B (-20 dBu / 0 dBu)
• Controls: Gain, Tone, Mix, Output level
• Switch: Effect Stop (+ jack)
• Housing: 19 "/ 1U, approx. 190 mm depth
• Weight: 2.6 kg
• Including power adapter

• Reverb
• Controls: Reverb Time, Damping, Pre Delay, Effect Level
• Type Toggle (Hall / Room / Special)
• Variation toggle (1/2)
• Filter Toggle (On / Off)
• Effect Mute Footswitch
• Jack input and output
• Powered by a 9V battery or 9V DC power adapter (not included)

• Authentic vintage spring reverb
• Reverb control: intensity of the reverb
• Decay control
• Sound control: character of the reverb
• Jack input and output
• DC input: middle negative, 70 mA consumption for 9V DC power supply (not included)
• Also works with 9 V battery
• Size pedal incl. Buttons (WxHxD); 60 x 50 x 115 mm
• Optional power supply available under art.409939

Functions of the Reverb Art Switch:

• Room: Emulates a small studio, rehearsal room or club reverb
• Spring: Reverbs created with reverb in the vintage guitar amp
• Hall: Creates larger concert reverb

• Reverb
• 3 Selectable reverb types
• Mod, Voice and Tone Sections
• Adjustable Shimmer, Glimmer, Morph & Pre- or Post-drive functions
• Adjustable Reverb Core size, Independent Reverb and Dry Level controls
• 8-Step sequencer for rhythmic pitch fluctuations of the reverb
• 16 Presets can be called from the front panel and 300 presets via MIDI
• High-impedance, extremely low-noise, discrete Class-A-JFET stereo preamplifier inputs and low-impedance stereo outputs
• Input level switch for instrument and line level signals
• Controls: Mod Speed & Depth, Decay Length & Size/Pitch, Mix Reverb & Dry, Tone Low & High Cut, Voice Interval, Shimmer
• Push buttons: Mod Target & Shape, Decay Texture & Quantize, Tone Filter Regen/Low Pass, Shimmer Input/Regen, Glimmer High Low, Drive Pre/Post, Sequence 1-8
• LED: Effect On/Sequence Step/Hold (Morph), Favorite/Sequence Tap, Infinite/Hold (Sequence), Mod Target & Shape, Decay Texture & Quantize, Tone Filter Regen/Low Pass, Shimmer Input/Regen, Glimmer High Low , Drive Pre/Post, Sequence 1-8
• Footswitch: Effect Bypass/Sequence/Step/Hold (Morph), Favorite/Sequence Tap, Infinite/hold (Sequence)
• Mono/Stereo input: 2x 6.3 mm jack
• Mono/Stereo output: 2x 6.3 mm jack
• EXP In
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Current consumption: 300 mA
• Power supply via 9 V DC power adapter (included)
• Switchable true/buffered bypass
• Dimensions (W x D x H): 178 x 114 x 44 mm
• Made in USA
• Power adapter included

Note: Battery operation is not supported

• Digital reverb effect pedal
• Powerful 32-bit DSP chip
• 3 Reverb modes: Studio, church and plate
• Controls: Decay, Tone, Mix
• Switch: Studio, Church, Plate
• LED: Effect On
• Footswitch: Effect Bypass
• Input and output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 140 mA
• Power supply with a 9 V DC mains adapter (not included), suitable optional mains adapter: art. 409939
• True bypass
• Dimensions (W x D x H): 72 x 120 x 55 mm
• Weight: 280 g

Note: Battery operation is not supported

• Reverb
• Authentic spring reverb tones
• Wide range of possible sounds from classic short F-style amp reverb to 'cavernous' surf rock sounds
• Analogue dry signal path
• True bypass
• Reverb control
• Bypass footswitch
• Transparent knob with status LED
• Metal housing
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power supply via 9 V DC mains adapter (not included in delivery)
• Power consumption: 95 mA
• Dimensions (L x W x H): 94 x 45 x 48 mm
• Weight: approx. 262 g

Note: Battery operation is not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• 24-bit High-resolution stereo reverbs
• Including Spring, Plate, Reverb, Gate, Room and Modulate sounds
• Controller for Mode, Time, Tone and Level
• Powered by 9V battery or 9V / DC power supply (not included)

• Reverb
• Compact design
• Easy to operate
• 3 Effect modes: spring, reverb & flerb
• Control: Reverb
• Switch: Mode: Spring/Hall/Flerb
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 105 mA
• Power supply via 9 V DC mains adapter
• Dimensions (W x D x H): 114 x 70 x 53 mm
• Includes power supply unit

Note: Battery operation is not supported.

• Reverb
• Authentic plate reverb emulation
• Based on the legendary EMT 140 record reverberator
• Controls: High pass, time, pre delay, mix and volume
• Power consumption: 62 mA
• Power supply via 9-18 V DC power supply unit (coaxial connection - negative polarity, not included - suitable power supply unit: Article number 409939)
• Made in USA

• Reverb
• 4 GFI System reverb algorithms in one pedal: Spatium, Shimmer, Plate & Tremble
• A multi-purpose jack allows the connection of an expression pedal or tap-tempo pedal
• Controls: Param, Decay, Level, Modes
• LED: Effect On, Tap
• LC display
• Footswitch: Effect Bypass/Ramp, A-B/Tap
• Stereo input: 6.3 mm stereo jack
• Stereo output: 6.3 mm stereo jack
• EXP/Tap connection: 6.3 mm stereo jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 110 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art. 409939)
• Dimensions (W x D x H): 72 x 120 x 55 mm
• Weight: 600 g

Note: No battery operation possible

• Oktave reverb
• 8 Selectable reverb modes: Abyss, Shimmer, Sub, Sub Shimmer, Astral, Ascend, Descend, Cosmos
• 8 Freely editable presets
• Freely assignable expression- or CV control for all control options
• Variable modulation
• Innovative Stretch function doubles the length of the reverb effect and adds an adjustable pitch bending effect
• Buffered bypass with switchable Tails Mode
• Analog dry signal path
• Artwork by well-known Marvel Comics artist Matt Horak
• Controls for: Length, Depth, Rate, Tone, Mix
• 8-Way rotary switch for selecting presets
• 8-Way rotary switch for selecting reverb modes
• Bypass footswitch
• Stretch footswitch
• Status LEDs
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• 6.3 mm Expression pedal input
• Powered via 9 V DC power supply unit (2.1 mm x 5.5 mm, coaxial power connector, negative polarity (-) inside (not included))
• Power consumption: 85 mA
• Metal housing
• Dimensions (L x W x H): 118 x 92 x 57 mm
• Weight: 450 g

Note: Battery operation is not supported.

Note: Register your instrument at www.w-distribution.de/Warranty to extend the warranty to 4 years.