Various Modules

• 4 CV inputs (1x with controller, 3x without controllers)
• Width: 6 TE / HP
• Depth: 50 mm
• Power requirement: +10 mA (+12 V) / -10 mA (-12 V)

• Generates 4 different random control voltages
• 2 outputs
• Trim potentiometers for adjusting the voltage levels
• Eurorack format
• Width: 12 HP
• Depth: 60 mm
• Power requirement: +40 mA (+ 12V) / -10 mA (-12V)
• Suitable expander module: Art.199100 (not included)

• Completely made by hand
• Power consumption: +12 volts (20 mA) / -12 volts (4 mA)
• 20 LEDs
• 3.5 mm jack sockets
• Depth: 50 mm
• Weight: 59 g
• 3 U Eurorack module
• Width: 8 TE
• Made in Brazil

• Voltage controlled rise limiter
• Separate control for rise and fall time via fader and CV input
• Shape controller for setting the characteristic (linear to logarithmic)
• Power requirement: 10 mA (+12 V) / 10 mA (-12 V)
• Width: 6 HP
• Depth: 31 mm

• 4-Channel random generator
• Adjustable minimum / maximum values for voltage and time
• CV inputs for all parameters
• Chromatic quantisation switchable
• Normal or Brownian random distribution for voltage and time can be selected
• Switchable input for external clock
• Expandable with ADDAC 501B expander (article 505630)
• Power requirement: 120mA (+ 12V) / 20mA (-12V)
• Width: 8 HP
• Depth: 50mm

• Dual 3-way crossfader
• Contains 2 crossfaders, each with 3 inputs (A, B, C) and one output
• Available knobs per channel for crossfading between inputs A, B and C
• Suitable for audio and CV signals
• Current consumption: 10mA (+12V) / 10mA (-12V)
• Width: 4 TE
• Depth: 30 mm

• Two flying bus boards; each with 5 slots
• Width of the module: 4 TE / HP
• Depth: 36 mm

Note: Requires additional external power supply boost adapter (item 438425, not included); Voltage specifications with optional boost adapter: +12 V / 2000 mA, -12 V / 500 mA, +5 V / 170 mA.

The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous input control voltage in the range of 0 ... 10V into a stepped output voltage in the same voltage range. The possible steps in the A-156 are not restricted to the usual half-tone grid (ie gradation in 1 / 12V steps) but also allows other scales of the grid such as the major scale, minor scale, major chord , Minor chord, fundamental fifth and the inclusion of sixth or seventh in the chords. The voltage values at the input are only converted into discrete voltages at the output, which meet the selection criterion for the permissible voltage grid (for example a minor seventh chord). The operating mode for Quantiser 1 is set with 3 tilt switches with center position. The Quantiser 2 is fixed to the half-tone grid.

For each of the two Quantisers there is a control input (CV In), a control output (CV Out), a trigger input (trig in) and a trigger output (trig. Out). If no signal is present at the trigger input (socket open), the quantisation is carried out continuously. If, however, a square-wave signal is applied there (from an LFO or the MIDI-SYNC interface for example), the quantisation is always performed only at the rising edge of the trigger signal. The quantisation process can thus be synchronised with other processes on demand. At the trigger output, a pulse appears whenever a quantisation (or a step change in the output voltage) occurs. For example, an envelope generator (ADSR) can be started.

In addition, the module has a common transpose input, which can be added to both quantisers and is quantised in a halftone grid. A typical application for this is to transpose a quantized sequence (generated by the A-155) with a second control voltage (from the MIDI CV interface for the example).

• Quantisation of a tone sequence from the A-155 into a fixed grid (halftones, only major scale, minor scale only)
• Quantise the control voltage of a Trautonium manual A-198, Theremin A-178 or Light-to-CV module A-179 to get always half-tones, scales, or chord sounds
• Arpeggio-like sound sequences with LFO, Random, Noise, ADSR etc. as input voltage

• Bi-directional control voltage quantiser
• Converts continuous input voltage into step output voltage
• Euro rack format
• Width: 8 HP
• Depth: 55 mm
• Power consumption: +50 mA (+ 12V)/ -10 mA (-12V)

• Precision Adder
• Module for precise transposition and summation of pitch CV
• Inputs A, B and C are summed
• Input C can be added and subtracted
• SUM output can be transposed up to 43 semitones with toggle switches
• Power requirement: 20 mA (+12 V) / 10 mA (-12 V)
• Width: 4 TE
• Depth: 20 mm

• Allows the supply of USB devices with 1A
• Compatible with the TPS30 MAX, TPS80, and TPS30MINI bus boards
• Width: 4 HP

• 2-Channel digital oscilloscope, frequency counter and tuner
• Single, Dual and X-Y modes
• Time axis adjustable from 10 μs - 10 s (10 microseconds to 10 seconds)
• Voltage range adjustable from 0.5 - 10 V.
• Hold mode
• Power requirement: 30 mA (+12 V) / 10 mA (-12 V)
• Width: 6 TE
• Depth: 25 mm

Doepfer A-185-2 VE; Eurorack module; Precision CV Adder / Bus Access; 4 CV inputs (x1 with attenuator bipolar switch, x3 with bipolar switchr); power consumption: 10mA (+12V) / 10mA (-12V); width: 6 HP; depth: 50mm; black frontpanel

• Force sense resistor
• Pressure-sensitive pad for generating manual CV and gate signals
• Power requirement: 24mA (+ 12V) / 9mA (-12V)
• Width: 10 HP
• Depth: 23mm

• Dual rotary switch
• Two channels, each connecting one of four inputs to the output or vice versa
• Can also be configured as a 4 x 4 switching matrix via an internal jumper
• Passive module
• Width: 4 TE
• Depth: 20 mm

• Passive routing module with 4 switching groups
• The upper position connects the top output to the centre
• The bottom switch position connects the lower output to the centre
• When the switch is in the middle position then the jacks are not connected
• Power requirement: 0 mA (+12 V) / 0 mA (-12 V)
• Width: 4 HP
• Depth: 20mm

• 2-Channel quantizer and sequencer
• Quantize any CV signals to a user-programmable tone scale
• Quantization can be synchronized via trigger input
• Two outputs A & B enable the formation of harmonic intervals - controllable via the shift input
• Step-sequencer with up to 128 steps
• Memory for 35 patterns
• Sequencer can be synchronized to Quantizer events
• Width: 8 TE

• Eurorack module
• Pulse-width generator
• Derives a rectangular signal with an adjustable pulse width from an incoming triangular, sawtooth or sine signal
• Manual pulse width controller (PW)
• Control input for pulse width modulation with attenuator (PWM)
• Signal input (In)
• Output with LED display (Out)
• Inverted output with LED display (/ Out)
• Internal dimming potentiometer for PW centering
• Internal dimming potentiometer for PWM
• Width: 4 HP / 4 HP / 20.0 mm
• Depth: 20 mm
• Current consumption: +20 mA (+12 V) / -20 mA (-12 V)

• 2-Channel CV processor
• Processes CV and audio signals
• Per channel: polarisation knob, 2 signal inputs, hold input, select input, unity input and processor output
• Applications: attenuate, mix and invert signals
• A / B switch
• On / off switch
• Offset generation and more
• Power requirement: 25 mA (+12 V) / 25 mA (-12 V)
• Width: 6 HP
• Depth: 43 mm

• 2-Channel digital oscilloscope, frequency counter and tuner
• Single, Dual and X-Y modes
• Time axis adjustable from 10 μs - 10 s (10 microseconds to 10 seconds)
• Voltage range adjustable from 0.5 V - 10 V
• Hold mode
• Developed in collaboration with vpme.de
• Current consumption: 8 mA (+12 V) / 0 mA (-12 V)
• Width: 16 HP
• Depth: 26 mm