Various Modules

• Quad USB Power Supply
• 4 USB ports for powering external devices
• Requires a housing with +5 V power supply (Doepfer A-100PSU3 recommended)
• Power requirement: 0 mA (+12 V) / 0 mA (-12 V)
• Width: 2 HP
• Depth: 30 mm

Note: no USB functionality!

• Voltage Controlled Slew Processor/Generator
• Vintage Edition
• Black front panel
• Adjustable slew-up time
• Switchable slope curve (linear/exponential)
• Eurorack format
• Current consumption: +30 mA (+12V) / -30 mA (-12V)
• Width: 8 HP / 40.3 mm
• Depth: 60 mm (measured from the back of the front panel)

• 4-Channel quantiser with 10 octaves tuning range
• Keyboard mode - uses the 12 buttons as a keyboard
• Freely definable user scales programmable
• Programmable chord mode
• Adjustable gate time
• Tuning control over up to 4 oscillators with transposition, microtuning and 5 selectable tempering
• Power requirement: 140 mA (+12 V) / 70 mA (-12 V)
• Width: 10 HP
• Depth: 52mm

• Vintage edition with black front plate
• Converts a continuous input voltage into a stepped output voltage
• Eurorack format
• Width: 8 HP
• Depth: 55 mm
• Power requirement: +50 mA (+ 12V) / -10 mA (-12V)

• Eight manual or CV controllable switches
• Shared output / input (O / I) and two inputs / outputs (I / O1, I / O2) per switch
• Functions of inputs and outputs are interchangeable
• Two modes: toggle or level
• Possible to chain multiple channels from the master / slave function
• Width: 12 HP
• Depth: 55 mm
• Power requirement: +40 mA (+12 V) / -5 mA (-12 V)

Note: A protective resistor in each O / I line can cause voltage drops when transmitting CV voltages. When transferring pitch control signals to a VCO, it is therefore advisable to insert a CV buffer (e.g. Art.378330, not included).

• Quad level shifter
• Contains 4 digital level converters for converting a +5 V signal (e.g. gate or trigger) to +12 V.
• Function reversible via jumper (conversion from +12 V to +5 V)
• Thanks to the normalisation of the channels, it can also be used as a buffer or multiplier for digital signals
• Power requirement: 30 mA (+12 V) / 0 mA (-12 V)
• Width: 2 HP
• Depth: 40mm

Note: Not suitable for analog signals!