Behringer System 35+ Bundle

Bundle offer comprising

Behringer Eurorack Go

• Eurorack Case
• 2 Rows, each with 140 HP
• Integrated bus board with 32 slots for Eurorack modules
• Vertical mounting is made possible with the integrated stand
• 96 Slide nuts (M3) pre-installed
• Maximum module depth: 40 mm (lower row), 62 mm (upper row)
• Power supply unit: +12 V / 3000 mA, -12 V / 1000 mA, +5 V / 1000 mA
• Dimensions (H x W x D): 112 x 723 x 311 mm
• Weight: 3.9 kg
• Includes external power supply unit (13 VDC, 5 A)

4x Behringer 921B Oscillator

• Eurorack Module
• Analogue VCO / LFO
• Octave selector and fine-tune control
• Outputs for sine, triangle, sawtooth and square/pulse
• Hard- and soft-sync selector switch
• 2 FM inputs (AC and DC coupled)
• Link inputs for pitch and pulse width (for control by 921A module)
• Current consumption: 45 mA (+12 V) / 45 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm

Behringer 921 VC Oscillator

• Eurorack Module
• Analogue oscillator with 6 waveforms: Sine, triangle, rising and falling sawtooth, square and pulse.
• Tuning range: 6 octaves
• Fine-tune control
• Switchable LFO mode
• PWM with 2 CV inputs
• Hard sync with adjustable phase and two trigger inputs
• 3 CV inputs (1V/oct.)
• Aux output with separately selectable waveform
• Current consumption: 50 mA (+12 V) / 50 mA (-12 V)
• Width: 14 HP
• Depth: 45 mm

Behringer 904A VC Low Pass Filter

• Eurorack Module
• Analogue -24dB/oct
• Low pass filter with resonance
• 3 Frequency ranges switchable
• 3 CV inputs for filter frequency
• Current consumption: 65mA (+12V) / 50mA (-12V)
• Width: 8 HP
• Depth: 38 mm

Behringer 923 Filters

• Eurorack Module
• Analogue dual filter and noise generator
• Separate low-pass and high-pass filter
• Per filter cutoff control
• Audio input and audio output
• 2 Outputs for white noise
• 2 Outputs for pink noise
• Current consumption: 35mA (+12 V) / 45mA (-12 V)
• Width: 8 HP
• Depth: 35 mm

Behringer 914 Fixed Filter Bank

• Eurorack Module
• 12 Active bandpass filters in the range of 125 Hz-5.6 kHz
• Additional low-pass and high-pass filters
• 2 Parallel inputs and outputs
• Current consumption: 60mA (+12V) / 70mA (-12V)
• Width: 28 HP
• Depth: 42 mm

2x Behringer 921A Oscillator Driver

• Eurorack Module
• Authentic reproduction of the circuits from the series “Modular 55 & 35”
• Controls up to 12 parallel 921B oscillator modules
• 2 Summed CV inputs for frequency control and 2 summed CV inputs for pulse width modulation
• Switchable semitone / octave selector and manual pulse width control
• Power requirement: 15 mA +12 V, 15 mA -12 V
• Width: 8 HP

Behringer 904B VC High Pass Filter

• Eurorack Module
• Analogue -24 dB/oct. high-pass filter
• 2 Frequency ranges switchable
• 3 CV inputs for filter frequency
• Current consumption: 55 mA (+12V) / 55 mA (-12V)
• Width: 8 HP
• Depth: 43 mm

Behringer CP35 Attenuators

• Eurorack Module
• 4 Passive attenuators with normalised inputs
• 4 Outputs for a fixed reference voltage (2x +6 V and 2x -6 V)
• 2 Passive 4-jack multiples
• Current draw: 1 mA (+12 V) / 1 mA (-12 V)
• Width: 21 HP
• Depth: 35 mm

Behringer 961 Interface

• Eurorack Module
• Multi-channel trigger converter
• 2 Channels for converting S-trigger to 2x V-trigger
• Derivation of 2 V-trigger signals from one audio signal (with adjustable sensitivity)
• Two channels with multi-channel V-trigger (2x 6 inputs) conversion to S-trigger output
• S-trigger length adjustable for V-trigger input group B
• Width: 21 HP

2x Behringer CP3A-M Mixer

• Eurorack Module
• 4 Inputs with volume control
• Master gain control
• 4 Parallel master outputs (2x inverted)
• 2 Integrated passive 4-jack multiples
• Width: 14 HP

3x Behringer 902 VCA

• Eurorack Module
• Switchable between linear and exponential characteristic curve
• Knob for manual adjustment
• 2 Signal inputs and outputs (1x inverted)
• 3 CV inputs
• Suitable for audio and CV signals
• Width: 8 HP

3x Behringer 911 Envelope Generator

• Eurorack Module
• Analogue envelope generator
• Controls for attack, decay, release time and sustain level
• Segment times adjustable from 2 ms – 10 s
• S-trigger input
• Width: 8 HP

Behringer 995 Attenuators

• Eurorack Module
• 3 Separate attenuators
• Each with input and output
• Suitable for CV and audio signals
• Width: 8 HP

Behringer 903A Random Signal Generator

• Eurorack Module
• Analogue noise generator with two outputs for white and pink noise
• Current consumption: 25mA (+12V) / 35mA (-12V)
• Width: 4 HP
• Depth: 23 mm

Behringer 962 Sequential Switch

• Eurorack Module
• Analogue CV multiplexer / switch
• 3 Trigger inputs and outputs
• 3 Buttons for manual channel selection
• CV Input for switching channels
• 2 Parallel V trigger outputs
• Width: 8 HP

Behringer 911A Dual Trigger Delay

• Eurorack module
• Analogue dual trigger delay with 2ms to 10s delay time
• Authentic reproduction of the circuits from the “Modular 55” series
• Channels can be used independently, in series or in parallel
• 2 separate channels with dedicated S-trigger inputs and outputs
• Power supply: 6 mA +12 V, 6 mA -12 V
• Width: 8 TE

Behringer CP3A-O OSC Controller

• Eurorack Module
• 4 CV inputs
• CV input 4 with attenuator
• 4 Switches to switch and sum CV signals
• 3 CV outputs with identical signal
• Width: 8 HP
• Current consumption: 5 mA (+12 V) / 5 mA (-12 V)

Behringer 992 Control Voltages

• Eurorack Module
• Auxiliary module that mixes 4 CV inputs to 3 parallel outputs
• Inputs 1-3 with unity gain
• Input 4 with bi-polar attenuator
• Each input can be activated via switch
• Current consumption: 10 mA (+12V) / 10 mA (-12V)
• Width: 8 HP
• Depth: 35 mm

the sssnake DD1060

• Patch Cable Set
• Mini jack mono to Mini jack mono
• Length: 60 cm
• Set of 6 cables

2x the sssnake DD1030

• Patch Cable Set
• Mini jack mono to Mini jack mono
• Length: 30 cm
• Set of 6 cables

the sssnake DD1015

• Patch Cable Set
• 2x Mini jack mono
• Length: 15cm
• Set of 6 cables