Acoustic Treatment Sets

Bundle offer comprising

• Absorber Panel Set
• Absorber for improving a room's acoustics
• Absorber profile: Spikes
• The precisely cut tiles allow combining and assembling different "the t.akustik" models (for example, WAW-7)
• The absorption efficiency is increased by a special design
• The correct use of the absorber reduces flutter echoes
• Optimises room acoustics and gives the room a professional atmosphere
• Main effective range: from approx. 800 Hz
• Material: Melamine resin foam
• Fire behaviour according to EN13501-1, Euroclass B s-1, d-0: Flame retardant
• Sound absorption coefficient: >0.9 from approx. 600 Hz
• Dimensions (L x W x H): 600 x 600 x 70 mm
• Colour: Grey
• Set contains 8 individual pieces
• Suitable adhesive: Article no. 481723 (not included in the delivery)

• Diffuser
• Set of 8
• For the optimization of room acoustic
• Sound radiation behavior is optimized by a special design
• Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio
• Lightweight diffuser is easy, non expensive and comfortable to install
• Can be painted with water-based paints (must not contain solvents!)
• Bulk density: 20 kg/qm
• Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1
• Material: EPS (Expanded Polystyrene)
• Colour: White
• Dimensions: 600 x 600 x 70 mm
• Set includes 8 pieces
• For mounting and fixing acoustic adhesive is recommended: Article Nr. 177265

• Absorber Plate Set
• Absorber for optimising acoustics
• Especially suitable for the absorption of low frequency sound waves
• Material: Melamine resin foam
• Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant
• Sound absorption coefficient: > 0.9 from approx. 600 Hz
• Dimensions (L x W x H): 370 x 370 x 600 mm
• Colour: Grey
• Set contains 2 individual pieces

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Dispersion Adhesive
• For acoustic convoluted foam, pyramid foam and Basotect foam
• Reduced slipping and longer open time D1 TE according to EN
• 12004:2017
• Solvent-free
• Ready to use
• Paste-like
• Fire class E for layer thickness 680 kg/m³
• Strong initial adhesion
• Quick strength development
• Working temperature > 5°C
• Storage: Cool but frost-free, below 30°C, protect from direct sunlight
• Cartridge with 310 ml content
• Suitable handheld cartridge dispenser: Article no. 417630 (not included)

Bundle offer comprising

• Corner Bass Traps
• Absorber for optimising room acoustics
• High-quality polyester acoustic foam with high density (45 kg / m3) and dense structure especially for the absorption of low frequencies
• Main frequency / effective range 80 to 500 Hz
• Material: Polyester acoustic foam
• Flame-retardant according to FMVSS 302 Burn rate
• Individually removable acoustic panels
• Dimensions: 400 x 400 x 600 mm
• Colour: Anthracite / birch
• Shipping quantity: 2 Pieces

• Acoustic Absorber
• For medium and high frequencies
• Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz
• Effective range: from approx. 315 Hz
• For optimising surround sound in recording studios, home theatres, and in home recording applications
• Material: 12 mm birch plywood filled with mineral wool
• Covered with grey fabric
• Dimensions: 600 x 600 x 100 mm
• Weight: 4.4 kg
• Colour: grey
• Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately)

• Diffuser Acoustic Elements
• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Dispersion Adhesive
• For acoustic convoluted foam, pyramid foam and Basotect foam
• Reduced slipping and longer open time D1 TE according to EN
• 12004:2017
• Solvent-free
• Ready to use
• Paste-like
• Fire class E for layer thickness 680 kg/m³
• Strong initial adhesion
• Quick strength development
• Working temperature > 5°C
• Storage: Cool but frost-free, below 30°C, protect from direct sunlight
• Cartridge with 310 ml content
• Suitable handheld cartridge dispenser: Article no. 417630 (not included)

Bundle offer comprising

• Corner Bass Traps
• Absorber for optimising room acoustics
• High-quality polyester acoustic foam with high density (45 kg / m3) and dense structure especially for the absorption of low frequencies
• Main frequency / effective range 80 to 500 Hz
• Material: Polyester acoustic foam
• Flame-retardant according to FMVSS 302 Burn rate
• Individually removable acoustic panels
• Dimensions: 400 x 400 x 600 mm
• Colour: Anthracite / birch
• Shipping quantity: 2 Pieces

• Acoustic Absorber
• For medium and high frequencies
• Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz
• Effective range: from approx. 315 Hz
• For optimising surround sound in recording studios, home theatres, and in home recording applications
• Material: 12 mm birch plywood filled with mineral wool
• Covered with grey fabric
• Dimensions: 600 x 600 x 100 mm
• Weight: 4.4 kg
• Colour: grey
• Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately)

• Diffuser Acoustic Elements
• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Acoustic Adhesive
• For acoustic convoluted, pyramids and basotect
• Solvent-free
• Elastoplastic
• Single-component special polymer adhesive
• Fast-curing and more universal than structural and assembly adhesives
• Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
• Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
• 310 ml/ 490 g Cartridge
• For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
• Note: Working temperature + 5° C to + 50° C
• Storage: Cool and dry at + 5° C to + 25° C
• Skin building time: 10 - 15 min
• Colour: White
• Consistency: Pasty
• Base: Polymer dispersion
• Spec. mass: Approx. 1.58 g/cm
• Protect from frost and heat
• Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
• New follow-up product: Article Nr. 481723 (not included)

• 8 piece(s) t.akustik Absorber Plate flex 140 BK
• 8 piece(s) t.akustik PET Table Holder M1 BK
• 4 t.akustik PET Ceiling Absorber 180 BK
• 4 t.akustik PET Wall Absorber 120 BK

• 2 piece(s) t.akustik PET Table Holder M1 BK
• t.akustik Absorber Plate flex 140 SGR
• t.akustik PET Wall Absorber 60 SGR
• 2 t.akustik PET Wall Absorber 120 SGR
• 2 t.akustik PET Ceiling Absorber 180 SGR

Bundle offer comprising

• Diffuser for Optimising Room Acoustics
• Diffuser profile: Stepped
• The radiation behaviour has been optimised by a special design
• The correct usage of the WDS-7 optimises the room acoustics and gives the room a professional atmosphere
• Due to its light weight, it is inexpensive and easy to install
• Material: EPS (expanded polystyrene)
• Fire behaviour building material class B1 according to DIN 4102 - 1
• Bulk density of 20 kg/gm fire class E according to EN 13 50 - 1
• Dimensions: 600 x 600 x 70 mm
• Colour: Graphite
• Package quantity: 8 Pieces

Note: For mounting, please use contact adhesive (Article Nr. 481723 - not included)

• Absorber
• The precisely cut tiles allow combining and assembling different "t.akustik" models (for example, WAW-7)
• The absorption efficiency is increased by a special design
• The correct use of the WAS-7 optimises the room acoustics and gives the room a professional atmosphere
• Main effective range: from approx. 800 Hz
• Absorber profile: Spikes
• Materials: Polyurethane foam
• Bulk density: 25.0 kg/m³ +/- 5%
• Reaction to fire: Burn rate
• Dimensions: 600 x 600 x 75 mm
• Colour: Light Grey
• Package quantity: 8 Pieces
• Acoustic adhesive: article no. 177265 (not included in the delivery)

• Corner Bass Traps
• Absorber for improving a rooms acoustics
• Especially suited for absorption of low frequency sound waves
• Material: Polyurethane soft foam material
• Bulk density: 25,0 kg / m³ +/- 5%
• Reaction to fire: burning rate
• Colour: Grey
• Dimensions:370 x 370 x 600 mm
• Packing dimensions (HxBxD) : 600 x 380 x 380 mm
• Includes 2 pieces
• Suitable acoustic adhesive for attachment: Article Nr. 177265 (not included)

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Acoustic Adhesive
• For acoustic convoluted, pyramids and basotect
• Solvent-free
• Elastoplastic
• Single-component special polymer adhesive
• Fast-curing and more universal than structural and assembly adhesives
• Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
• Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
• 310 ml/ 490 g Cartridge
• For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
• Note: Working temperature + 5° C to + 50° C
• Storage: Cool and dry at + 5° C to + 25° C
• Skin building time: 10 - 15 min
• Colour: White
• Consistency: Pasty
• Base: Polymer dispersion
• Spec. mass: Approx. 1.58 g/cm
• Protect from frost and heat
• Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
• New follow-up product: Article Nr. 481723 (not included)

Bundle offer comprising

• Absorber Panel Set
• Absorber for improving a room's acoustics
• Absorber profile: Spikes
• The precisely cut tiles allow combining and assembling different "the t.akustik" models (for example, WAW-7)
• The absorption efficiency is increased by a special design
• The correct use of the absorber reduces flutter echoes
• Optimises room acoustics and gives the room a professional atmosphere
• Main effective range: from approx. 800 Hz
• Material: Melamine resin foam
• Fire behaviour according to EN13501-1, Euroclass B s-1, d-0: Flame retardant
• Sound absorption coefficient: >0.9 from approx. 600 Hz
• Dimensions (L x W x H): 600 x 600 x 70 mm
• Colour: Grey
• Set contains 8 individual pieces
• Suitable adhesive: Article no. 481723 (not included in the delivery)

• Diffuser
• Set of 8
• For the optimization of room acoustic
• Sound radiation behavior is optimized by a special design
• Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio
• Lightweight diffuser is easy, non expensive and comfortable to install
• Can be painted with water-based paints (must not contain solvents!)
• Bulk density: 20 kg/qm
• Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1
• Material: EPS (Expanded Polystyrene)
• Colour: White
• Dimensions: 600 x 600 x 70 mm
• Set includes 8 pieces
• For mounting and fixing acoustic adhesive is recommended: Article Nr. 177265

• Absorber Plate Set
• Absorber for optimising acoustics
• Especially suitable for the absorption of low frequency sound waves
• Material: Melamine resin foam
• Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant
• Sound absorption coefficient: > 0.9 from approx. 600 Hz
• Dimensions (L x W x H): 370 x 370 x 600 mm
• Colour: Grey
• Set contains 2 individual pieces

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Dispersion Adhesive
• For acoustic convoluted foam, pyramid foam and Basotect foam
• Reduced slipping and longer open time D1 TE according to EN
• 12004:2017
• Solvent-free
• Ready to use
• Paste-like
• Fire class E for layer thickness 680 kg/m³
• Strong initial adhesion
• Quick strength development
• Working temperature > 5°C
• Storage: Cool but frost-free, below 30°C, protect from direct sunlight
• Cartridge with 310 ml content
• Suitable handheld cartridge dispenser: Article no. 417630 (not included)

Bundle offer comprising

• Corner Bass Traps
• Absorber for optimising room acoustics
• High-quality polyester acoustic foam with high density (45 kg / m3) and dense structure especially for the absorption of low frequencies
• Main frequency / effective range 80 to 500 Hz
• Material: Polyester acoustic foam
• Flame-retardant according to FMVSS 302 Burn rate
• Individually removable acoustic panels
• Dimensions: 400 x 400 x 600 mm
• Colour: Anthracite / birch
• Shipping quantity: 2 Pieces

• Acoustic Absorber
• For medium and high frequencies
• Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz
• Effective range: from approx. 315 Hz
• For optimising surround sound in recording studios, home theatres, and in home recording applications
• Material: 12 mm birch plywood filled with mineral wool
• Covered with grey fabric
• Dimensions: 600 x 600 x 100 mm
• Weight: 4.4 kg
• Colour: grey
• Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately)

• Diffuser Acoustic Elements
• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Dispersion Adhesive
• For acoustic convoluted foam, pyramid foam and Basotect foam
• Reduced slipping and longer open time D1 TE according to EN
• 12004:2017
• Solvent-free
• Ready to use
• Paste-like
• Fire class E for layer thickness 680 kg/m³
• Strong initial adhesion
• Quick strength development
• Working temperature > 5°C
• Storage: Cool but frost-free, below 30°C, protect from direct sunlight
• Cartridge with 310 ml content
• Suitable handheld cartridge dispenser: Article no. 417630 (not included)

Bundle offer comprising

• Absorber Set
• Optimises room acoustics
• Main frequency range: approx. 400 to 3150 Hz
• Material: Polyester acoustic foam
• Flame retardant in accordance with FMVSS 302; Burning rate:
• Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm
• Colour: Anthracite / Silver Spruce
• Set contents: 6 Absorber panels

• Diffuser Acoustic Elements
• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

• Corner Bass Traps
• Absorber for optimizing room acoustics
• Especially suitable for the absorption of low-frequency sound waves
• Material: Polyester acoustic foam
• Main frequency / effective range 80 to 1000 Hz
• Flame-retardant according to FMVSS 302 Burn rate
• Dimensions: 370 x 370 x 600 mm
• Colour: Anthracite / silver spruce
• Shipping quantity: 2 Pieces

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Dispersion Adhesive
• For acoustic convoluted foam, pyramid foam and Basotect foam
• Reduced slipping and longer open time D1 TE according to EN
• 12004:2017
• Solvent-free
• Ready to use
• Paste-like
• Fire class E for layer thickness 680 kg/m³
• Strong initial adhesion
• Quick strength development
• Working temperature > 5°C
• Storage: Cool but frost-free, below 30°C, protect from direct sunlight
• Cartridge with 310 ml content
• Suitable handheld cartridge dispenser: Article no. 417630 (not included)

• 4 piece(s) t.akustik PET Table Holder M1 WH
• 4 piece(s) t.akustik Absorber Plate flex 140 WH
• 2 t.akustik PET Ceiling Absorber 180 WH
• 2 t.akustik PET Wall Absorber 120 WH

Bundle offer comprising

• Absorber Set
• Optimises room acoustics
• Main frequency range: approx. 400 to 3150 Hz
• Material: Polyester acoustic foam
• Flame retardant in accordance with FMVSS 302; Burning rate:
• Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm
• Colour: Anthracite / Silver Spruce
• Set contents: 6 Absorber panels

• Diffuser Acoustic Elements
• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

• Corner Bass Traps
• Absorber for optimizing room acoustics
• Especially suitable for the absorption of low-frequency sound waves
• Material: Polyester acoustic foam
• Main frequency / effective range 80 to 1000 Hz
• Flame-retardant according to FMVSS 302 Burn rate
• Dimensions: 370 x 370 x 600 mm
• Colour: Anthracite / silver spruce
• Shipping quantity: 2 Pieces

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Acoustic Adhesive
• For acoustic convoluted, pyramids and basotect
• Solvent-free
• Elastoplastic
• Single-component special polymer adhesive
• Fast-curing and more universal than structural and assembly adhesives
• Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
• Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
• 310 ml/ 490 g Cartridge
• For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
• Note: Working temperature + 5° C to + 50° C
• Storage: Cool and dry at + 5° C to + 25° C
• Skin building time: 10 - 15 min
• Colour: White
• Consistency: Pasty
• Base: Polymer dispersion
• Spec. mass: Approx. 1.58 g/cm
• Protect from frost and heat
• Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
• New follow-up product: Article Nr. 481723 (not included)

• For acoustic optimisation of studio rooms
• To aid in controlling acoustical problems in small project studios, giving the room a professional appearance
• Dimensions per DST panel (L x W x H): 305 x 305 x 50 mm
• Dimensions per DST trap: 305 x 305 x 610 mm

Set includes:

• 32 Panels DST-112 (Anthracite)
• 32 Panels DST-114 (Burgundy)
• 4 Bass Traps LENRD-DST (Anthracite)
• 3 Adhesive tubes "Tubetak Pro"

Bundle offer comprising

• Diffuser for Optimising Room Acoustics
• Diffuser profile: Stepped
• The radiation behaviour has been optimised by a special design
• The correct usage of the WDS-7 optimises the room acoustics and gives the room a professional atmosphere
• Due to its light weight, it is inexpensive and easy to install
• Material: EPS (expanded polystyrene)
• Fire behaviour building material class B1 according to DIN 4102 - 1
• Bulk density of 20 kg/gm fire class E according to EN 13 50 - 1
• Dimensions: 600 x 600 x 70 mm
• Colour: Graphite
• Package quantity: 8 Pieces

Note: For mounting, please use contact adhesive (Article Nr. 481723 - not included)

• Absorber
• The precisely cut tiles allow combining and assembling different "t.akustik" models (for example, WAW-7)
• The absorption efficiency is increased by a special design
• The correct use of the WAS-7 optimises the room acoustics and gives the room a professional atmosphere
• Main effective range: from approx. 800 Hz
• Absorber profile: Spikes
• Materials: Polyurethane foam
• Bulk density: 25.0 kg/m³ +/- 5%
• Reaction to fire: Burn rate
• Dimensions: 600 x 600 x 75 mm
• Colour: Light Grey
• Package quantity: 8 Pieces
• Acoustic adhesive: article no. 177265 (not included in the delivery)

• Corner Bass Traps
• Absorber for improving a rooms acoustics
• Especially suited for absorption of low frequency sound waves
• Material: Polyurethane soft foam material
• Bulk density: 25,0 kg / m³ +/- 5%
• Reaction to fire: burning rate
• Colour: Grey
• Dimensions:370 x 370 x 600 mm
• Packing dimensions (HxBxD) : 600 x 380 x 380 mm
• Includes 2 pieces
• Suitable acoustic adhesive for attachment: Article Nr. 177265 (not included)

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Acoustic Adhesive
• For acoustic convoluted, pyramids and basotect
• Solvent-free
• Elastoplastic
• Single-component special polymer adhesive
• Fast-curing and more universal than structural and assembly adhesives
• Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
• Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
• 310 ml/ 490 g Cartridge
• For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
• Note: Working temperature + 5° C to + 50° C
• Storage: Cool and dry at + 5° C to + 25° C
• Skin building time: 10 - 15 min
• Colour: White
• Consistency: Pasty
• Base: Polymer dispersion
• Spec. mass: Approx. 1.58 g/cm
• Protect from frost and heat
• Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
• New follow-up product: Article Nr. 481723 (not included)

• For acoustic optimisation of studio rooms
• Set consists of: 8x Wavewood Ultra Lite, 2x DC2 Multifuser, 2x Flexi Glue Ultra
• Colour: Brown Oak

Wavewood Ultra Lite:

• Made from standard MDF and melamine
• Suitable for the absorption of medium frequencies
• Optimal effective range: 315 - 1000 Hz
• Can be used as bass traps when installed at 45° in the corners of the room
• Dimensions per piece: 595 x 595 x 45 mm

DC2 Multifuser:

• Diffuser is made from EPS (expanded polystyrene)
• Optimises room acoustics
• Dimensions per piece: 600 x 600 x 147 mm

• 12 piece(s) t.akustik Absorber Plate flex 140 BK
• 12 piece(s) t.akustik PET Table Holder M1 BK
• 6 t.akustik PET Ceiling Absorber 180 BK
• 6 t.akustik PET Wall Absorber 120 BK

Bundle offer comprising

• Corner Bass Traps
• Absorber for optimising room acoustics
• High-quality polyester acoustic foam with high density (45 kg / m3) and dense structure especially for the absorption of low frequencies
• Main frequency / effective range 80 to 500 Hz
• Material: Polyester acoustic foam
• Flame-retardant according to FMVSS 302 Burn rate
• Individually removable acoustic panels
• Dimensions: 400 x 400 x 600 mm
• Colour: Anthracite / birch
• Shipping quantity: 2 Pieces

• Acoustic Absorber
• For medium and high frequencies
• Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz
• Effective range: from approx. 315 Hz
• For optimising surround sound in recording studios, home theatres, and in home recording applications
• Material: 12 mm birch plywood filled with mineral wool
• Covered with grey fabric
• Dimensions: 600 x 600 x 100 mm
• Weight: 4.4 kg
• Colour: grey
• Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately)

• Diffuser Acoustic Elements
• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Acoustic Adhesive
• For acoustic convoluted, pyramids and basotect
• Solvent-free
• Elastoplastic
• Single-component special polymer adhesive
• Fast-curing and more universal than structural and assembly adhesives
• Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
• Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
• 310 ml/ 490 g Cartridge
• For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
• Note: Working temperature + 5° C to + 50° C
• Storage: Cool and dry at + 5° C to + 25° C
• Skin building time: 10 - 15 min
• Colour: White
• Consistency: Pasty
• Base: Polymer dispersion
• Spec. mass: Approx. 1.58 g/cm
• Protect from frost and heat
• Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
• New follow-up product: Article Nr. 481723 (not included)

• 16 piece(s) t.akustik PET Table Holder M1 BK
• 16 piece(s) t.akustik Absorber Plate flex 140 SGR
• 8 t.akustik PET Wall Absorber 120 SGR
• 8 t.akustik PET Ceiling Absorber 180 SGR

Bundle offer comprising

• Absorber Set
• Optimises room acoustics
• Main frequency range: approx. 400 to 3150 Hz
• Material: Polyester acoustic foam
• Flame retardant in accordance with FMVSS 302, Burning rate:
• Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm
• Colour: Anthracite/Silver Spruce
• Set content: 4 Absorber panels

• Diffuser Acoustic Elements
• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

• Corner Bass Traps
• Absorber for optimizing room acoustics
• Especially suitable for the absorption of low-frequency sound waves
• Material: Polyester acoustic foam
• Main frequency / effective range 80 to 1000 Hz
• Flame-retardant according to FMVSS 302 Burn rate
• Dimensions: 370 x 370 x 600 mm
• Colour: Anthracite / silver spruce
• Shipping quantity: 2 Pieces

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Dispersion Adhesive
• For acoustic convoluted foam, pyramid foam and Basotect foam
• Reduced slipping and longer open time D1 TE according to EN
• 12004:2017
• Solvent-free
• Ready to use
• Paste-like
• Fire class E for layer thickness 680 kg/m³
• Strong initial adhesion
• Quick strength development
• Working temperature > 5°C
• Storage: Cool but frost-free, below 30°C, protect from direct sunlight
• Cartridge with 310 ml content
• Suitable handheld cartridge dispenser: Article no. 417630 (not included)

Bundle offer comprising

• Ceiling Absorbers For Acoustic Room Optimisation
• Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres
• Effective range: from 315 Hz
• Material: PET fleece, 50 mm thick (tolerance of +/- 10%)
• Density: approx. 50 kg/m3
• Absorption NRC = 0.95
• Flame retardant according to the ASTM E84 - Class 1
• Very suitable for high humidity environments
• Suspension system: 4 adjustable stainless steel cables (each approx. 1 m) and 4 hooks
• The wall plugs are embedded in the absorber plate
• Dimensions (H x W x D): 1800 x 1200 x 50 mm
• Panel thickness: 50 mm
• Weight: 6.2 kg
• Colour: Black
• Delivery quantity: 1 piece

• Wall absorber set
• For acoustic room optimisation
• Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres
• Effective range: from 315 Hz
• Material: PET fleece, 50 mm thick (tolerance of +/- 10%)
• Volume weight: Approx. 50 kg/m3
• Absorption NRC = 0.95
• Flame retardant according to ASTM E84 - Class 1
• Very suitable for high humidity environments
• Easy to hang up due to recess on the back by means of L-hooks (included in delivery)
• Set contains 4 modules
• Panel thickness: 50 mm
• Dimensions per module (W x H x D): 600 x 600 x 50 mm
• Weight per module: 0.95 kg
• Colour: Black

• Wall Absorber Set
• Suitable for acoustic room optimisation
• Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres
• Effective range: from 315 Hz
• Material: PET fleece, 50 mm thick (tolerance of +/- 10%)
• Volume weight: approx. 50 kg/m3
• Absorption NRC = 0.95
• Flame retardant according to ASTM E84 - Class 1
• Very suitable for high humidity environments
• Easy to hang up due to the recess L-hooks on the back (included in the delivery)
• Set includes: 2 modules
• Panel thickness: 50 mm
• Dimensions per module (W x H x D): 1200 x 600 x 50 mm
• Weight per module: 1.85 kg
• Colour: Black

Bundle offer comprising

• Diffuser for Optimising Room Acoustics
• Diffuser profile: Stepped
• The radiation behaviour has been optimised by a special design
• The correct usage of the WDS-7 optimises the room acoustics and gives the room a professional atmosphere
• Due to its light weight, it is inexpensive and easy to install
• Material: EPS (expanded polystyrene)
• Fire behaviour building material class B1 according to DIN 4102 - 1
• Bulk density of 20 kg/gm fire class E according to EN 13 50 - 1
• Dimensions: 600 x 600 x 70 mm
• Colour: Graphite
• Package quantity: 8 Pieces

Note: For mounting, please use contact adhesive (Article Nr. 481723 - not included)

• Absorber
• The precisely cut tiles allow combining and assembling different "t.akustik" models (for example, WAW-7)
• The absorption efficiency is increased by a special design
• The correct use of the WAS-7 optimises the room acoustics and gives the room a professional atmosphere
• Main effective range: from approx. 800 Hz
• Absorber profile: Spikes
• Materials: Polyurethane foam
• Bulk density: 25.0 kg/m³ +/- 5%
• Reaction to fire: Burn rate
• Dimensions: 600 x 600 x 75 mm
• Colour: Light Grey
• Package quantity: 8 Pieces
• Acoustic adhesive: article no. 177265 (not included in the delivery)

• Corner Bass Traps
• Absorber for improving a rooms acoustics
• Especially suited for absorption of low frequency sound waves
• Material: Polyurethane soft foam material
• Bulk density: 25,0 kg / m³ +/- 5%
• Reaction to fire: burning rate
• Colour: Grey
• Dimensions:370 x 370 x 600 mm
• Packing dimensions (HxBxD) : 600 x 380 x 380 mm
• Includes 2 pieces
• Suitable acoustic adhesive for attachment: Article Nr. 177265 (not included)

• Hand sealant gun
• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

• Dispersion Adhesive
• For acoustic convoluted foam, pyramid foam and Basotect foam
• Reduced slipping and longer open time D1 TE according to EN
• 12004:2017
• Solvent-free
• Ready to use
• Paste-like
• Fire class E for layer thickness 680 kg/m³
• Strong initial adhesion
• Quick strength development
• Working temperature > 5°C
• Storage: Cool but frost-free, below 30°C, protect from direct sunlight
• Cartridge with 310 ml content
• Suitable handheld cartridge dispenser: Article no. 417630 (not included)