DI Boxes

• For removing ground loops
• Jacks
• Dimensions: 114 x 73 x 38 mm
• Weight 0.4 kg

• Ideal for mobile devices such as mobile phones, laptops, tablets, mp3 players, etc.
• Input: 3.5 mm Mini-jack plug (stereo) on approximately 1.5 m cable
• Outputs: 2x 6.3 mm Jack (balanced) and 1x XLR mono summed
• Ground lift switch
• Pad switch (-15 dB)
• Dimensions (L x W x H): 114 x 60 x 40 mm
• Weight: 337 g
• Colour: Blue

Note: The XLR output and the jack outputs cannot be used simultaneously. Plugging in the jack plugs (L/R) separates the signal flow to the XLR mono output.

• Neutrik XLR/jack combo sockets with HiZ input
• Stereo mini jack input
• Phantom power can be switched separately for each channel
• Sum switch routes both inputs to both outputs
• Split switch routes left input to both outputs
• 20 dB input pad and ground lift switchable
• Dimensions (W x H x D): 118 x 63 x 142 mm
• Weight: 0.65 kg

• Completely passiv design
• 8 Transformers to separate input and output signal grounds
• Noises caused by ground loops are suppressed by separation of the two signal paths
• In and outputs with XLR, 6.3 mm jack and RCA jacks
• Mass separation of input and output signal reduces hum
• Transformers with extremely linear frequency response and wide frequency range
• Can be used for signal tapping or as a splitter
• All-metal housing
• Removable rack mount bracket. 19"/ 1U

• OEP / Carnhill transformer
• Discrete Class-A-FET circuit
• Power supply with +48 V phantom power with LED indicator
• Power consumption: 3.8 mA
• Switch for pad -15 dB
• Switch for ground lift
• Solid aluminium construction
• WIMA and Nichicon capacitors
• Input: 6.3 mm jack
• Outputs: XLR & 6.3 mm jack (Thru)
• Metal film resistors 1% 1/4W
• Frequency range: 20 Hz - 70 kHz, ± 2 dB
• Input impedance: 1 MΩ
• Output impedance:
• Maximum input level: >1 dBV (without pad), 17 dBV (with pad)
• Dimensions (W x H x D): 100 x 50 x 100 mm
• Weight: 459 g
• Made in the UK

• 1 x XLR in
• 1 x Jack in
• 1 x Jack out
• Phase reverse
• Ground lift
• Switchable filter: flat, highpass, lowpass
• Switchable mute
• Adjustable level
• Robust metal housing
• Colour: Black

• Inputs: Hi-Z XLR / jack (TRS / TS) combo socket
• Outputs: TS jack (LINK), low-Z XLR
• Transformer isolated
• Three-stage PAD switch
• Ground lift switch
• Dimensions (W x D x H): 124 x 78 x 46 mm
• Weight: 0.5kg

• For use with the TC GLT transmitter: Article number 449229 (not included)
• For long cables of up to 100 m
• Transformer insulated design
• XLR input
• Unbalanced 6.3 mm jack output
• Passive construction
• Dimensions (H x W x D) 64 x 118 x 112 mm
• Weight: 0.43 kg

• Suitable for instruments and multimedia applications
• Midas transformer
• Operation with +48 V phantom power or built-in 9 V battery (not included)
• Automatic switchover to battery operation if phantom power is lost
• XLR and 6.3 mm jack (mono) inputs
• Neutrik XLR output
• Pad switch: 0 / -20 / -40 dB
• Ground lift
• Power switch
• Input impedance: >250 kOhm
• Output impedance: >600 Ohm
• Signal-to-noise ratio: -112 dBu
• Sturdy, compact aluminium housing with protective hard rubber corners
• Dimensions (W x H x D):118 x 64 x 112 mm
• Weight: 0.56 kg

• For the reduction of signal disturbances and hum loops
• 2 Inputs via balanced XLR/6.3 mm jack (600 Ohm) combo jacks
• 2 Galvanically isolated XLR outputs (600 Ohm) with ground lift switch
• Shielded metal housing
• Frequency range: 20 - 20,000 Hz
• Dimensions (W x H x D): 125 x 55 x 75 mm
• Weight: 650 g

It often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal.

• Jack input
• Parallel output
• Output impedance balanced
• Impedance and signal matching for the direct connection of instruments to amplifiers and mixers
• Filter switch reduces annoying hiss and buzz
• Ground lift switch eliminates typical ground loop problems
• Instruments or amplifier outputs with up to 3,000 watts can be connected directly
• It converts any unbalanced signal to a balanced signal and eliminates unwanted noise
• Compact, road-suitable metal casing

• Direct injection
• 2-Channel
• PAD switch (0dB/-30dB)
• Jack as an input connector
• Balanced XLR output
• Input impedance: 68 Ohm
• Output impedance: 600 Ohms
• Transfer ratio: 10: 1
• Maximum output level: +6 dBu
• 5 year warranty

• 6.3 mm Jack input
• 6.3 mm jack thru
• XLR output
• Switchable -15 dB pad
• Switchable ground lift
• Jensen transformer
• Robust metal housing

• Especially suited to multimedia applications
• Midas transformer
• Inputs: 2x 6.3 mm jack, 1x 3.5 mm mini-jack (stereo) and 2x RCA
• Neutrik XLR outputs
• 15 dB pad switch
• Ground lift
• Input impedance: 30 kOhm
• Output impedance: 600 Ohm
• Frequency range (±1 dB):: 20 Hz - 30 kHz
• Signal-to-noise ratio: 105 dBu
• Sturdy, compact aluminium housing with protective, hard rubber corners
• Dimensions (W x H x D): 118 x 64 x 112 mm
• Weight: 0.53 kg

• Direct connection of instruments to amplifiers and mixers
• Allows long cable paths without loss of sound in the high frequency range
• Jack input
• Parallel output
• Balanced XLR output ground lift switch solves typical problems with ground loops
• Road-suitable metal housing

• Strong metal version for portable applications
• Jack in - 1x parallel out
• XLR in - 1x parallel out
• 2x isolated XLR out
• Ground lift

• 16 Bit / 44.1kHz Digital Audio Converter (DAC)
• Bluetooth version A2DB Dual Mode with BLE and DID listing
• Sync formats SBC and AAC according to A2DP specifications
• 3.5 mm jack monitoring headphone output
• 2 XLR outputs
• Ground lift switch
• Frequency response 20 - 20000 Hz ±0.5dB
• Output impedance: 50 Ohm
• Isolating transformer type: 1:1 + 1:1
• Power supply via USB-C port
• Steel housing
• Dimensions (W x D x H): 78 x 124 x 46 mm
• Weight: 0.61 kg

• Converts 2 unbalanced signals (2-pin - 6.3 mm jack) into balanced (3-pin - XLR)
• With ground-lift function
• Adjustable volume of the input signal
• Input impedance: 50 kΩ
• Output impedance: 600 Ohm
• Sturdy metal body
• Dimensions 12 x 14 x 4 cm
• Colour: Black

• Frequency range: 10 Hz -50 kHz
• THD: 0.01% Typical @ 1 kHz
• Input: unbalanced jack
• Input impedance 50 kOhm
• Output: XLR male
• Output impedance 600 Ohm
• Switchable low pass filter -3 dB @ 30 kHz
• PAD switch (0dB, -20dB, -40dB)
• Phase switch (normal / invert)
• Switchable ground lift
• Dimensions: 44.5 x 107 x 89 mm
• Weight: approx. 340 g