We have created for you a rating of the Best 10 Electronics for Basses
Equipment list navigation:
- Seymour Duncan SSTC-3M4
- EMG BQS System 3-Band EQ 5 Potis
- EMG VMC Control 1 Poti
- Sadowsky Onboard Bass Preamp
- EMG BTS System
- EMG BQC System
- Seymour Duncan STC-3P
- Darkglass Tone Capsule Bass Preamp
- Seymour Duncan STC-2P
- Aguilar OBP-3TK Onboard Bass Preamp
1. Seymour Duncan SSTC-3M4
3-Band Electronics
- 4 Controllers
- Suitable for Music Man electric bass
2. EMG BQS System 3-Band EQ 5 Potis
EMG BQS -System 3-band EQ pot set for electric bass, based on BQC control but with 5pots, for EMG pickups only, this system features a pre-wired balance control (blend) and master volume with separate bass and treble pots along with the concentric mid-control (stacked)., solderless
3. EMG VMC Control 1 Poti
EMG VMC Control 1 Poti, for Guitar & Bassguitar, Tandempoti for parametric Midth. +/- 12 db between 100-1000 Hz. completed BTC u. BTS to a 3-Band EQ System
4. Sadowsky Onboard Bass Preamp
Sadowsky Onboard Bass Preamp (4-Knob System), prewired onboard bass preamp for J-style basses with metal control plate, active preamp for passive pickups, 4-knob layout with controls for Master Volume / Balance / Vintage Tone Control (P/P) / Treble and Bass (stacked), push/pull function at VTC knob for preamp bypass, can be installed either with the included control plate or mounted through a rear control cavity, frequency response 5 Hz – 50 kHz, Bass control offers +18 dB boost at 40 Hz, Treble control offers +18 dB boost at 4 kHz, total harmonic distortion (THD) 0.18% at 1 kHz, power supply via one 9V battery, current draw 9 mA, up to 870 hours battery life, input impedance 1 Mohm, output impedance 1 kohm, Installation Depth: 29 mm, main board: LxWxD 30 mm x 21 mm x 25 mm
5. EMG BTS System
EMG EQ / Potentiometer Knob Set
- Active balance control featuring a center detent for the middle position: for loss-free balance between two pickups
- 2-Band equalizer with single-pole filters
- 2-Position dip switch allows for adjustments to the slope of the high frequency response
- iIncludes master volume control, output socket, battery buss and clip
6. EMG BQC System
Complete Control for Electric Basses with Active EMG Pickups
- Active balance, master volume and 3-band EQ with control bass
- Semi-parametric mids and highs over 2 concentric / stacked potentiometers
- Center locking for neutral setting
- Adjustable mid frequency range from 100 Hz to 1 kHz
- Including solderless cables, potentiometers, battery clamp & jack socket
7. Seymour Duncan STC-3P
Bassline Electronics
- 3-Band
- Including volume, pan, and a switchable “Slap Contour” preset
- For passive basses
8. Darkglass Tone Capsule Bass Preamp
Onboard Bass Preamp
- Provides the transparency of the Microtube B7K EQ as a built-in pre-amp
- Control: Bass + -12 dB @ 70Hz – Mids: + -12 dB @ 500Hz – Hi Mids + -12 dB 2.8kHz
- Including potentiometer
- The Tone Capsule can be used with one or two batteries in series for 9 V or 18 V operation (battery clips not included)
9. Seymour Duncan STC-2P
Bassline Electronics
- For passive basses
- 2 Band
- Including volume, pan, and a switchable “Slap Contour” preset
10. Aguilar OBP-3TK Onboard Bass Preamp
On-board Bass Preamp
- The most versatile Aguilar bass preamp
- +/- 18 db for Bass (40 Hz)
- +/- 16 dB for thomann Mid (400 or 800 Hz)
- +/- 16 dB for Treble (6.5 KHz).
- Can be operated with one or two 9V batteries
Included in delivery:
- Preamp
- 3 Potentiometers for bass, mid and treble
- Mini-switches for the selection of the central frequency
Write your review and rate this rating The Best 10 Electronics for Basses
