Graphic Equalizers

• 2x15 Band
• ± 6/12 dB Input gain
• 4-Segment output status LED
• Dynamic range >108 dB
• Format: 1U
• XLR / jack input/output
• Internal power adapter

• With FBQ Feedback Detection System audio anayser
• Servo-balanced inputs and outputs with jack and XLR
• Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz
• Switchable Low-Cut
• 4-Digit LED display and input level control
• Illuminated faders
• Design: 19" / 1U

Bundle offer comprising

• Digital Speaker Management SystemWith the Drive Rack 260, dbx introduces a new loudspeaker management system for live and installation applications. It combines all the important functions necessary for an optimal loudspeaker management in PA applications

• Auto-EQ for automatic speaker / room tuning
• Separate microphone input with phantom power for measuring microphone and pink noise generator for room measurement
• Real Time Analyser
• Up to 2.7 sec configurable delay
• Stereo graphic or parametric input equalizer, 4 band parametric output EQ, classic dbx compression, crossover, feedback eliminator, peak stop limiter and 120A subharmonic synthesizer for signal processing
• Phase and polarity at the output adjustable and Auto Gain Control
• 24-Bit DA and 24-bit Type IV AD converters provide 110 dB of dynamic response
• Graphical user interface or GUI for fast and safe editing of the parameters
• 2 XLR inputs and 6 XLR outputs
• Format: 19", 1U

• Measurement microphone

The MM-1 is an omnidirectional Measurement microphone with a 1/4" wide, polarised condenser capsule.

• Polar pattern: Omnidirectional
• Frequency range: 20 Hz to 18 kHz
• Output impedance: 200 Ohm
• Max. SPL: 132 dB
• SNR:> 70 dB
• Phantom power: +9 V to +52 V
• Incl. bracket

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• Design: 500 module
• 12 dB boost/but per band
• Midpoint filter frequencies: 31 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz
• Bypass switch
• Based on the original 1969 API 560 EQ

• 4 LEDs for output level
• 45mm faders (20 Hz - 20 kHz)
• Balanced jack and XLR in/out
• Switchable ranges +/- 6dB and +/- 15dB
• Format: 19" 3U

• Audio Analyzer
• Low-noise operational amplifiers
• Servo-balanced inputs and outputs with jack and XLR
• Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz
• Adjustable Low- and Hi-Cut
• 12-Digit LED display for in - and output signal
• Input level control
• Hard bypass switch
• Illuminated faders
• Design: 19" / 2U

• 1x 31-Band
• ± 6/12 dB Input gain
• Output level display
• Switchable bypass
• Clip LED
• 50 Hz low-cut filter 12 dB / octave
• 20 mm faders
• Dynamic range >108 dB
• Control range switchable ± 6 dB or ± 12 dB
• Bal. jack/XLR in/out
• Internal power adapter
• Format: 19" 1U

• Works as a feedback detector or as an audio analyser
• Limiter
• Pink noise generator
• 2x XLR or 6.3mm jack input
• 2x XLR or 6.3mm jack output
• 1x XLR Mono sub output with X-Over frequency controller
• Height: 3 U
• Dimensions (H x W x D): 133 x 483 x 138 mm
• Weight: 2.3 kg

• 2x 31 band Constant Q filters
• 20 mm faders
• ± 12 dB variable input gain
• 4 LEDs output level meter
• Clip LED over modulation indicator
• Inputs and outputs: Balanced XLR / jack
• 50 Hz Low-cut filter 12 dB/octave
• ISO standard (20-20000 Hz)
• Dynamic range: >108 dB
• Frequency Response: 50 kHz
• Control range can be switched to ± 6 or ± 12dB
• Bypass capability
• Internal power adapter
• Format: 19" 2 U
• Weight: 2.73 kg