Installation Amps

Biamp Systems REVAMP2150 - 2-channel class-D amplifier, 2x 165 W at 4 ohms, 1x 330 W at 8 ohms (bridged), 2 Euroblock line inputs balanced, 2 Cinch line inputs unbalanced, construction: 1 U, 19", fanless, dimensions (W x H x D): 483 x 44 x 239 mm, weight: 5.1 kg

• With Dante Networking
• Power: 2x 60 watts 4 ohms, 2x 60 watts 8 ohms
• Class D power amplifier
• Direct Drive Technology
• Without cooling
• Switchable Low-Z (4/8 Ohm) or High-Z (70/100 V) operation per channel
• Switchable high-pass filter per channel
• Input: RJ45 Ethernet
• Output: 4-pin Euroblock
• Dimensions (W x H x D): 218 x 44 x 280 mm
• Weight: 2.6 kg

Biamp Systems REVAMP4100 - 4-channel class-D amplifier, 4x 110 W at 4 ohms, 2x 225 W at 8 ohms (bridged), 4 Euroblock line inputs balanced, 4 Cinch line inputs unbalanced, construction: 1 U, 19", fanless, dimensions (W x H x D): 483 x 44 x 239 mm, weight: 3.5 kg

• Power: 2x 100 Watt 4 Ohm, 2x 100 Watt 8 Ohm, 2x 100 Watt 16 Ohm
• Class D power amplifier
• IDEEA technology (IntelliDrive Energy Efficient Amplifier) enables high power levels with very low distortion and minimal power consumption
• RSL (Rails Sensing Limiter) for optimum audio quality and ideal load conditions on both output channels
• Asymmetrical loading of the channels possible
• Flexible power distribution to both channels possible
• Switchable Low-Z (4/8/16 Ohm) or High-Z (70/100 V) operation per channel
• Switchable high-pass filter per channel
• 2 Terminal connections stereo for speakers
• Dimensions (W x H x D): 483 x 44 x 276 mm
• Weight: 4.2 kg

• Power: 2x 600 W (THD + N
• I-Share Mode Power: 1x 1200 W (2-4 Ohm, 70/100 V)
• Gain: 35 dB
• Frequency response: 20 - 20.000 Hz (+/- 1 dB @ 1 W)
• Crosstalk:> 80 dB @ 1 kHz,> 65 dB @ 20 kHz
• Dynamic range> 100 dBA (at rated power)
• Audio latency:
• Analog inputs: 2 channel balanced Euroblock
• Impedance: 10 kOhm
• Max. Level: 22 dBu
• Sensitivity: -10 dBV / 4dBu / 14 dBu
• Digital inputs and outputs: AMPLINK 8 channels via RJ45
• Audio output: 2x Ch terminal block
• Format: 19"/ 1 U
• Installation depth: 406 mm
• Weight: 6.2 kg

• Power: 120 watts 4 ohms, 120 watts 8 ohms
• Class-D
• Without fan
• Switchable low-Z (4/8 Ohm) or high-Z (70/100 V) operation
• Switchable high-pass filter
• Euroblock input & output
• RCA input
• RJ-45 remote volume control
• Dimensions (W x H x D): 218 x 44 x 299 mm
• Weight: 2.3 kg

Biamp Systems REVAMP2120T - 2-channel class-D amplifier, 2x 120 W (70/100 V or RMS into 4 ohms), 1x 240 W (70/100 V or RMS into 8 ohms, bridged), 2 Euroblock line inputs balanced, 2 Cinch line inputs unbalanced, construction: 1 U, 19", fanless, dimensions (W x H x D): 483 x 44 x 239 mm, weight: 6,1 kg

• Wth 7A RMS and digital signal processing
• Digital interface for precise system adjustment
• Highly energy-efficient class D amplifiers with low heat dissipation ensure low operating and maintenance costs
• Built-in test tones
• Automatic gain control
• Compact 1U rack mounting unit with internal transformer for easy rack mounting
• Optimised for speech frequencies with unsurpassed speech intelligibility
• High quality music playback
• Industry standard Phoenix connectors
• Data correspond to the standard IEC 62489-1
• 100V line input
• Dimensions (W x D x H): 430 x 190 x 44 mm
• Weight: 2.8 kg

• Digital interface for precise system setting
• Highly energy-efficient class D amplifiers with low heat dissipation ensure low operating and maintenance costs
• Built-in test tones
• Automatic gain control
• Compact 1U
• Rack mount unit with internal transformer for easy rack mount
• Optimised for speech frequencies with unsurpassed speech intelligibility
• High quality music playback
• Industry standard phoenix connectors
• Data compliant with IEC 62489-1 Standard
• 100V line input
• Frequency range: 80Hz to 65kHz
• Dimensions (W x D x H): 430 x 190 x 44 mm
• Weight: 2.5 kg

• 2 x 240W / 100V
• Balanced XLR connectors for inputs and signal loop-through
• Screw-terminal connections for outputs
• Quiet, temperature-controlled fan
• Dimensions (W x H x D): 484 x 88 x 387 mm / 2 U
• Weight: 15 kg

• Output: 2x 600 watts 2 ohms, 2x 600 watts 4 ohms, 2x 600 watts 8 ohms, 2x 310 watts 16 ohms
• Class D power amplifier
• IDEEA technology (IntelliDrive Energy Efficient Amplifier) enables high power levels with very low distortion and minimal power consumption
• RSL (Rails Sensing Limiter) for optimum audio quality and ideal load conditions on both output channels
• Asymmetrical loading of channels possible
• Flexible power distribution possible on both channels
• Switchable Low-Z (4/8/16 Ohm) or High-Z (70/100 V) operation per channel
• Switchable high-pass filter per channel
• 2 Terminal connections stereo for speakers
• Dimensions (W x H x D): 483 x 44 x 276 mm
• Weight: 4.2 kg

• Power: 1x 25 Watt
• Ideal for small fixed installations in the area of ELA, POS, museums
• Power supply from 12-24 Volt
• Balanced inputs
• Summing amplifier at input
• GreenDesign
• With microphone input for active electret microphones: 9 - 12 V phantom power
• Suitable power supply unit: Article Nr. 434954 (not included in delivery)

• For expansion of the Bose IZA series
• Power: 1x 90 W@70V/100V
• 1 Balanced mic/line input: combo XLR - 6.3 mm jack
• 2 Unbalanced line inputs: stereo RCA
• 1 Balanced page input: 4-pin Euroblock
• 1 Unbalanced AUX input: 3.5 mm jack
• Dynamic range: 88 dB
• EQ for Bose FreeSpace FS2 or FS4
• Weight: 3.2 kg

• Power: 4x 250 watts 4 ohms, 4x 250 watts 8 ohms, 4x 250 watts 16 ohms
• Class D power amplifier
• IDEEA technology (IntelliDrive Enegry Efficient Amplifier) enables high power levels with very low distortion and minimal power consumption
• RSL (Rails Sensing Limiter) for optimum audio quality and ideal load conditions on all 4 output channels
• Asymmetrical loading of the individual channels possible
• Flexible power distribution to all 4 individual channels possible
• Switchable Low-Z (4/8/16 Ohm) or High-Z (70/100 V) operation per channel
• Switchable high-pass filter per channel
• 4 Stereo terminal connections for speakers
• Dimensions (W x H x D): 483 x 44 x 381 mm
• Weight: 6.2 kg

Biamp Systems REVAMP8250 - 8-channel class-D amplifier, 8x 250 W at 4 ohms, 4x 500 W at 8 ohms (bridged), 8 Euroblock line inputs balanced, 8 Cinch line inputs unbalanced, construction: 2 U, 19", fan-cooled, dimensions (W x H x D): 483 x 88 x 330 mm, weight: 21.7 kg

• With Dante networking
• Power: 2x 240 watts 4 ohms, 2x 240 watts 8 ohms
• Class D power amplifier
• Direct Drive Technology
• Without cooling
• Switchable Low-Z (4/8 Ohm) or High-Z (70/100 V) operation per channel
• Switchable high-pass filter per channel
• Input: RJ45 Ethernet
• Output: 4-pin Euroblock
• Dimensions (W x H x D): 218 x 44 x 280 mm
• Weight: 2.6 kg