Home / VST / Loudspeaker / Bullhorn

Showing all 3 results

+ Show more - Show less

Showing 1 - 3 out of 3

Page 0 out of 0

Rating Image Product Price
4.82
SOUND
QUALITY
FEATURES
VALUE FOR MONEY
EASE OF USE
Buyer Rating84 Votes

Megaphone

Bullhorn / Loudspeaker Emulation

Megaphone is a plug-in that emulates a bullhorn/loudspeaker effect, which features two loudspeaker emulations, feedback (slapback) control and a noise section. Megaphone can be used to make any audio source sound as if it’s being played by a bullhorn.

Feedback

The feedback section is essentially a slapback effect. When using megaphones, the output of the loudspeaker can be captured again by the input microphone, introducing a delay/reflection and the usual feedback tones (those can be triggered with high gain sources and feedback amount higher than 50%).

Noise:

  • ​The megaphone noises can be enabled by the Trigger button. There are two types of noise: Button and Burst. You can balance the mix between the two noises with the Source parameter.
  • The button noise is the noise made by clicking on the megaphone button to enable its microphone.
  • The burst is the typical background noise of the loudspeaker.
  • If the envelope is enabled, the Burst noise will follow the transients of the input signal.

Features

  • 2 Loudspeaker emulations
  • Overdrive + Bandwidth control
  • Feedback / Slapback
  • Preset system with randomizer
  • Formats: VST, AU, and AAX (64-bit only)
  • Platforms: OSX, Windows

Windows XP SP2 or later / OSX 10.6.8 or later Intel Core 2 Duo 2GHz or equivalent 2 GB RAM / 500 MB

HD Screen resolution: 1024×768 VST2, AU, or AAX 64-Bit ONLY

MAC SPECS:

  • OS X 10.9 – macOS 12
  • 2GHz CPU, 4 GB RAM
  • VST2, VST3, AU, or AAX (64-bit)
  • Universal 2 Binary
Price History: Megaphone
19.00 $
4.6
SOUND
QUALITY
FEATURES
VALUE FOR MONEY
EASE OF USE
Buyer Rating67 Votes

Speakers

Speakers is a plugin effect designed to emulate a wide range of loudspeakers and microphones using our state-of-the-art convolution engine.

Shape any sound like it’s being played by an old telephone, radio, or classic cabinet; or shape it like it’s being recorded by a vintage ribbon microphone or even a toy recorder.

Speakers features a freely configurable effects chain, comprising compression, distortion, and filtering, as well as an array of looping background noises for setting the sound in a variety of environments.

Speakers is a zero-latency* post-production dream plugin. No iLok or any other dongle required!

Speakers features:

  • 47 speakers: cabinets, devices, phones, radios, speakers, toys
  • 30 microphones: condensers, dynamics, phones, ribbons, and more
  • 15 distortion/degradation algorithms: from carbon mic overdrive to GSM interference
  • 35 background noises: devices, places, organic, and more

EQUALIZERS

Clicking the spanner button at the top left of either panel reveals a five-band EQ – low and high shelves and three parametric bands – for shaping the frequency response of the Microphone and Speaker emulations.

Drag the nodes around to set band frequencies and gains, scroll the mousewheel over a node to tweak the Q, double click to reset the band.

DISTORTION / DEGRADATION

Speakers features 15 distortion and degradation algorithms for post-production and sound design.

Distortion: Carbon Mic, Classic Drive, Diode Clipper, Foldover, Soft Drive, Tape, Valve.

Degradation: Bit Crusher, Clicks, Drops, GSM, Interference, Quantization, Robotization, Telecom.

ROUTING

The Routing panel enables limitless reordering of Speakers’ signal flow. To move a module, simply drag it left or right. The Input module marks the point at which the source signal enters the signal path, disregarding everything to the left. This can be useful for, for example, having the Noise pass through certain modules prior to being joined by the input signal further down the path.

  • Rearrange the modules with a simple drag and drop
  • Disable a module with CMD or CTRL + Click.
  • Change the Input position, make sure the lock is open by clicking on it.

SYSTEM REQUIREMENTS

PC

  • Windows 7, 8, 10
  • 2GHz CPU, 4 GB RAM
  • VST2, VST3, or AAX (64-bit)

MAC

  • OS X 10.9 – macOS
  • 2GHz CPU, 4 GB RAM
  • VST2, VST3, AU, or AAX (64-bit)
  • Universal 2 Binary
Price History: Speakers
99.00 $
4.36
SOUND
QUALITY
FEATURES
VALUE FOR MONEY
EASE OF USE
Buyer Rating141 Votes

DSP Manager 2

DSP Manager 2 is a 64-bit standalone software developed to manage loudspeaker systems for studios, concerts, venues, conferences or any other kind of event that requires loudspeaker management or routing audio sources to different listening spaces.

It allows managing complex loudspeakers systems (2-way & 3-way) using a computer, soundcard, MIDI controller and VST/AU plugins instead of a crossover hardware unit.

Main features:

  • 4 Stereo Inputs / 4 Stereo Outputs.
  • Built-In Brickwall Limiter.
  • 4th Order Linkwitz-Riley & 3rd Order Butterworth Crossovers.
  • 2-Way & 3-Way Crossover Modes.
  • Matrix Mode. Route audio sources to different loudspeaker systems.
  • 5-Band Parametric EQ.
  • Output Delay Compensation.
  • Up to 4 plugins on each output.
  • Recording.
  • Midi.
  • Preset Manager.

What’s new in DSP Manager 2:

  • Improved Audio Engine.
  • New 4th Order Linkwitz-Riley Crossover Filter.
  • New Delay Compensation System.
  • New Built-In Recording System.
  • New MIDI Assign System.
  • Compatibility with the latest Mac & Windows OS, including Apple Silicon ARM.

Mac:

  • OS 10.11.6 or later.
  • Apple Silicon ARM OS 11 or later.
  • 4GB Ram Recommended.
  • Screen resolution 1900×1080.

Windows:

  • Windows 8 or later.
  • 4GB Ram Recommended.
  • Screen resolution 1900×1080.
Price History: DSP Manager 2
109.00 $