Modular All-in-one Systems

• Pre-configured modular system consisting of Erica Synths tube modules
• Contains: 2x Fusion VCO2, Fusion VCF3, Fusion Modulator, Fusion VCA/Waveshaper/Ringmodulator, Fusion Delay/Flanger/Vintage Ensemble
• 104 HP One Row Skiff Case with lid
• Dimensions: approx. 52 x 15 x 11 cm
• Includes external power supply and 20 patch cables

• Pre-configured modular system consisting of Erica Synths tube modules
• Contains: 2x Fusion VCO2, Fusion VCF3, Fusion Modulator, Fusion VCA/Waveshaper/Ringmodulator
• 84 HP One Row Skiff Case
• Dimensions (W x D x H): 470 x 150 x 110 mm
• Includes external power supply and 20 patch cables

• Eurorack Go housing
• Includes power supply unit and BP56, BP28 and BP12 plate blanks
• 96 HP free for expansion with other modules

Modules included:

• 914 Fixed Filter Bank
• 923 Filters
• 904A VC Low Pass Filter
• 904B VC High Pass Filter
• 2 x 902 VCA
• 2 x 911 Envelope Generator
• 921A Oscillator Driver
• 2 x 921B Oscillator
• 921 VC Oscillator
• CP3A-M Mixer
• CP35 Attenuators
• 961 Interface
• CM1A MIDI-CV Interface

• Consists of Nifty Case (incl. power supply), 2 modules, 6 patch cables and 2x 30 HP panel blanks with Cre8audio logo.

Cellz module:

• Double unipolar control voltage generator
• 16 Ttouch-sensitive touch pads including LED
• Generates semitone quantisation or free scale
• 2 Tune buttons
• 2 CV outputs: 0 - 5 V

Chipz module:

• Digital double oscillator / LFO Eurorack module

• Full-featured modular drum machine
• Consists of the following modules: Sample Drum, Bassline, Bass Drum, Snare, Toms, Clap, Hi-Hats D, Cymbals, Modulator, Link, Stereo Mixer, Mixer, Dual FX, Mixer Lite
• Dual Drive and Drum Sequencer
• Drum modules are internally patched to the sequencer for trigger- and accent-signals
• System comes assembled in an Erica Synths Travel Case
• Dimensions: 550 x 280 x 140 mm
• Weight: 7.55 kg
• External power supply included

• Fully analogue construction
• Plug-in connections can be stored via plug-in voice cards (5 x preset cards and 5 x DIY cards included)
• Dimensions (W x D x H): 240 x 140 x 80 mm
• Weight: 950 g
• Includes: 20 patch cables, 1 stackable patch cable, external power supply (12 V DC) and manual

Includes:

• Step sequencer
• 2 x VCO
• 2 x Mixer
• LFO
• Sample & Hold
• Noise & Random generator
• 2 x Function generator
• 2 x Lowpass Gate
• BBD delay & output section

• Eurorack Go housing
• Includes power supply and dummy plates BP12 and 3 x BP2
• 18 HP free for extension with other modules

Modules included:

• 2 x 921A Oscillator Driver
• 4 x 921B Oscillator
• 921 VC Oscillator
• 914 Fixed Filter Bank
• 923 Filters
• 904A VC Low Pass Filter
• 904B VC High Pass Filter
• 992 Control Voltages
• CM1A MIDI-CV Interface
• 2 x CP3A-O OSC Controller
• 2 x CP3A-M Mixer
• CP35 Attenuators
• 961 Interface
• 3 x 911 Envelope Generator
• 3 x 902 VCA

Bundle offer comprising

• Eurorack Module
• Analogue 2-channel VCA
• Per channel: Mixer with 3 adjustable inputs, 3 CV inputs with attenuator, gain control, 2 signal outputs (low/high) and switch between linear and exponential characteristics
• Current consumption: 30mA (+12V) / 20mA (-12V)
• Width: 16 HP

• Eurorack Module
• Two independent analogue ADSR envelopes
• For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release
• 2 Signal outputs and inverted output
• Analogue LFO with 5 waveforms
• Fader for frequency and delay time
• Three frequency ranges selectable (0.05 - 30Hz)
• CV and trigger input and 2 signal outputs
• Current consumption: 40mA (+12V) / 40mA (-12V)
• Width: 16 HP
• Depth: 44 mm

• Eurorack Module
• Authentic reproduction of the original "System 100M" circuitry
• 2 Low-pass filters with cut-off frequency and resonance control
• Each filter has 3 audio outputs and 3 CV inputs with attenuators
• Each VCF has an additional switchable 3-mode high-pass filter
• 3-Channel mixer per VCF allows independent mixing of all input signals
• Current requirement: 40 mA +12 V, 40 mA -12 V
• Width: 16 HP

• Eurorack Module
• Contains two identical analogue VCOs
• Waveforms: triangle, sawtooth and square/pulse
• Adjustable pulse width and PWM CV input with attenuator
• Octave selector and fine-tune control
• Hard- and soft-sync
• 3 Pitch CV inputs with attenuators
• Current consumption: 130 mA (+12 V) / 70 mA (-12 V)
• Width: 16 HP
• Depth: 46 mm

• Eurorack Module
• Analogue ring modulator
• Noise generator with two outputs for white noise and pink noise
• Sample & hold unit with clock out, external clock in and fader for clock rate and lag time
• Analogue LFO with 5 waveforms
• Fader for frequency and delay time
• Three frequency ranges selectable (0.03 - 30Hz)
• CV and trigger input and 2 signal outputs
• Current consumption: 60mA (+12V) / 50mA (-12V)
• Width: 16 HP
• Depth: 44 mm

• Power supply module for Eurorack systems
• Control LEDs for +12 V, -12 V and +5 V.
• Slots for 2 Flying Bus Boards with 7 slots each
• Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V)
• Width: 4 HP
• Depth: 52mm
• Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each

• Eurorack empty housing
• Compact empty housing for synthesizer modules and accessories in a 3 U format
• Sturdy aluminium frame with wooden side walls
• Width: 104 HP
• maximum depth: 38 mm (1.5")
• Easy positioning of modules using 52 sliding nuts (included)
• Large rubber feet are secure and non-sliping on most surfaces
• Dimensions (W x H x D): 546 x 84 x 133 mm
• Weight: 1.2 kg
• Design and development in the UK

• Patch Cable Set
• Mini jack mono to Mini jack mono
• Length: 30 cm
• Set of 6 cables

• 2 x 104 TE aluminium travel case with lid
• Dimensions (W x D x H): 550 x 300 x 180 mm
• Includes external power supply and 30 patch cables

Modular system consists of:

• Black Wavetable VCO
• 2 x Black VCO2
• Black Multimode VCF
• Black LPG
• Black EG
• 2 x Black Quad VCA2
• Black Stereo Delay
• Black Output
• Black Joystick2
• Black Modulator
• Black Mixer/Splitter
• Black Hole DSP2
• Black CV Tools
• Black Sequencer

Moog Model 10 Modular Synthesizer; recreation of the first Moog compact modular synthesizer from 1971; system contains: 1x 901 Voltage Controlled Oscillator; 1x 901A Oscillator driver, 2x 901B Oscillators, 1x 902 Voltage Controlled Amplifier, 1x 903A Random Signal Generator, 1x 904A Voltage Controlled Low Pass Filter, 1x 907 Fixed Filter Bank, 2x 911 Envelope Generators, 1x CP11 Console Panel and a 130 Watt 120 VAC Power Supply (selectable voltages 100V, 120V 220V, and 240V)

Behringer System 55; Eurorack Modular-System; contains the modules 914 Fixed Filter Bank, 923 Filters, 904A VC Low Pass Filter, 904B VC High Pass Filter, 992 Control Voltages, x5 902 VCA, x4 911 Envelope Generator, x2 921A Oscillator Driver, x6 921B Oscillator, 921 VC Oscillator, 950 Sequential Controller, CM1A MIDI-CV Interface, x3 CP3A-O OSC Controller, x3 CP3A-M Mixer, x2 995 Attenuators, 903A Random Signal Generator, CP35 Attenuators, 961 Interface, 962 Sequential Switch; x2 Eurorack Go case with power supply; x2 Eurorack Go Brackets to link two Eurorack Go cases; including blank panels BP28, BP56 (x2) and BP2 (x2); 144 HP of free expansion space for other modules

• Contains 5 Endorphin.es modules built into a Frap Tools housing
• Has two Buchla-style wired oscillators with waveshaper, two function generators that can be used as envelopes, LFOs or additional VCOs
• Two filters or low-pass gates with eight operating modes each and an effect stage
• A mono/stereo mixer with integrated effect inserts plus ducking compressor, utility sections and a tune function
• Extensively equipped, flexibly editable MIDI-CV interface
• Integrated Endorphin.es modules: Furthrrrr Generator, Grand Terminal, Gateway, Cockpit and Shuttle Control
• Dimensions (H x D): 3 U x 84 TE
• Weight: approx. 2.5 kg
• Includes dust and transport cover, hook and loop fastener, power supply unit and patch cable

• Includes 5 Endorphin.es modules installed in a Frap Tools housing
• Has two Buchla-style wired oscillators with waveshaper
• Two function generators can be used as envelopes, LFOs or other VCOs
• Two filters or low-pass gates, each with eight modes and one effect level
• A mono/stereo mixer with built-in effects inserts plus ducking compressor, utility sections and a tune function
• Extensively equipped, flexibly editable MIDI CV interface
• Integrated Endorphin.es modules: Furthrrrrr Generator, Grand Terminal, Gateway, Cockpit and Shuttle Control
• Dimensions (HxT): 3 U x 84 HP
• Weight: approx. 2.5 kg
• Includes dust cover and transport cover, hook-and-loop fastener, power supply and patch cable

• For experimental sampling and sound processing
• Consisting of the modules: Wobblebug, Maths, Mult, Morphagene, QPas, Mimeophon and XOH.
• 10 TE free for further modules
• Fully assembled in skiff case (104 TE)
• Dimensions (H x W): 3 U x 104 hp
• Dimensions (W x H x D): approx. 546 x 132 x 88.9 mm
• Weight: 3.0 kg
• Incl. power supply unit