Power Amps

• Power: 2x 3000 Watt at 4 Ohm, 2x 1600 Watt at 8 Ohm
• Inputs: Jack and XLR
• Outputs: Speaker-twist
• Built-in crossover
• Integrated limiter
• Mains, signal and limit LEDs
• Dimensions: 19" / 2 HE
• Housing depth: 320 mm
• Weight: 5.9 kg

• Power: 2x 800 Watt/4 Ohm Peak, 2x 500 Watt/8 Ohm Peak, 1700 Watt/8 Ohm Peak bridged
• Limiter
• XLR and 6.3 mm jack inputs
• Speaker Twist & binding post outputs
• Short-circuit protection
• Design: 19"/ 2U
• Dimensions: 88 x 482 x 375 mm
• Weight: 12.5 kg

• Very low installation depth: 259 mm
• Weight: Only 6 kg
• Power: 2x 1200 W at 4 ohms
• Hi-peak power up to 4500 W
• Class-D output circuitry
• Large, backlit 256p x 128p LC display
• 2 Rotary encoders and 3 buttons for quick access
• High-pass filter, 4th-order Linkwitz-Riley, adjustable frequency of 20 Hz up to 4 kHz
• Low pass filter, 4th-order Linkwitz-Riley, adjustable frequency of 60 Hz up to 4 kHz
• 4-Band parametric EQ with frequencies
• Variable gain and bandwidth
• Peak limiter: Protects the loudspeaker via the input of all individual power- and impedance data
• Delay: Max. 50 ms
• Digital gain: +10 dB / -100 dB
• 20 Presets for the most popular speaker configurations, adjustable
• Status LEDs: 2x Green: Signal / 2x Red: A/D Clip / 1x Blue: Indicates AC on
• Inputs: 2x XLR and 2x 6.35 mm stereo jack
• Outputs: 2x NL4, lockable (NL2 compatible) and 2x binding posts
• Mono- or bi-amping connector
• Protected circuit design and thermal protection
• Power supply secured in case of instable power supply
• Removable power cable (C13/safety plug)
• Dimensions (W x H x D): 483 x 89 x 259 mm
• Design: 19", 2U

• 2x 910 W/ 4 ohm
• 2x 590 W/ 8 ohm
• 2x 1200 W/ 2 ohm
• 1x 1800 W/ 8 ohm (bridge mode)
• 2400/ 4 Ohm (bridge mode)
• XLR Input and output
• Speaker twist output
• Dimensions: 485 x 370 x 97 mm
• 19" / 2 RU
• Weight: 10.4 Kg

• Power: 2x 900 W at 4 Ωs, 2x 1500 W at 2 Ωs
• Inputs: 6.3 Mm jack and XLR
• Outputs: Speaker Twist
• DSP features: Delay, crossover (3 filter types, slope up to 48 dB/octave), equalizer (8 parametric, 2 dynamic), security settings
• Format: 19" / 2 RU
• Case depth: 231 mm
• Weight: 3.6 kg

• Power: 2 x 1430 W at 4 ohm, 2 x 950 W at 8 ohm, 1 x 2860W at 8 ohm bridged (@1kHz, THD
• Frequency range: 20 Hz - 20,000 kHz
• XLR input and output
• Input sensitivity: 0.77 V
• Outputs: Speaker Twist and binding posts
• Protected circuit design: DC
• Short circuit protection
• Over temperature protection
• Limiter
• Amplifier class: H
• Mains power: 230 V, 50 Hz
• Dimensions (W x D x H): 482 (19") x 362 x 88 mm
• Design: 19" / 2 U
• Weight: 16 kg

• Output: 2 x 1200 W at 4 ohm, 2 x 800 W at 8 ohm, 1 x 2400 W at 8 ohm bridged (@ 1 kHz, THD)
• Frequency response: 20 - 20,000 Hz
• XLR input and output
• Input sensitivity: 0.77 V
• Outputs: Speaker Twist and binding posts
• Protected circuit design: DC
• Short-circuit protection
• Over temperature protection
• Limiter
• Amplifier class: H
• Mains power: 230 V, 50 Hz
• Dimensions (W x D x H): 482 (19") x 362 x 88 mm
• Design: 19" / 2U
• Weight: 15.28 kg

The SLA-2 is a 1 RU 19" power amplifier that is suitable for studio and live applications thanks to its SmartFan silent cooling system, meaning that the following fields of application are possible: project, home and recording studios, broadcasting/radio/TV, live/PA area, DJ sound systems, permanent/fixed installations, churches, clubs and rehearsal room PA systems. Alongside its excellent sound with minimal interference and unwanted noise, the ART SLA-2 offers the following features:

• 200 Watt RMS at 8 Ohm per channel
• 280 Watt RMS at 4 Ohm per channel
• 560 Watt RMS at 8 Ohm bridged
• Frequency range: 10 Hz to 40 kHz +/- 0.5 dB
• CMMR: > 60 dB (typical @ 1 kHz)
• THD:
• Toroidal transformer
• Balanced XLR / unbalanced 6.3 mm jack inputs
• Weight: 9 kg

• Power: 4x 860 Watt at 4 Ohm, 4x 440 Watt at 8 Ohm
• Inputs: Jack and XLR
• Outputs: Speaker-twist
• Built-in crossover
• Integrated limiter
• Mains, signal and limit LEDs
• Dimensions: 19" / 2 HE
• Housing depth: 320 mm
• Weight: 6.1 kg

• 2 x 75 W at 4 ohms
• 2 x 45 W at 8 ohms
• Balanced inputs with XLR and jack
• Bridgeable
• Speaker Twist and terminal connections for speaker out
• All protection circuits including Softstart
• Switchable input level of -0 +4 db
• Damping factor > 150
• For all applications where no fan is desired
• 19" Rack mount 1U, depth 33 cm
• Weight: 7.5 kg

• 2x 1350 W/ 4 Ohm
• 2x 1000 W/ 8 Ohm
• 2700 W/ 8 Ohm bridge mono
• Signal-to-noise ratio > 100 dB
• Damping factor >200
• XLR/ RCA connector input
• Speaker twist and binding post outputs
• Turn-on delay
• Short-circuit protection
• 19" 2 RU
• Installation depth: 31.5 cm
• Weight: 19.5 Kg

• Convection-cooled
• Class AB
• Power: 100 W RMS at 8 Ohm
• Bridged mono: 245 W at 8 Ohm
• Frequency response: 20 Hz - 30 kHz (+/- 0.25 dB)
• THD:
• Inputs: 2x XLR female
• Outputs: 2x XLR male Link, 2x screw terminals
• Design: 19" 1U
• Dimensions (W x H x D): 482.6 x 44.5 x 260.4 mm
• Weight: 6.7 kg

• With Class D circuit
• Amp modes: 2-channel stereo, mono bridged or Y mode
• Power rating: 2x 775 W/ 2 Ohm, 2x 525 Watt/ 4 Ohm, 2x 300 W/ 8 Ohm, bridged 1x 1550 W/ 4 Ohm, bridged 1x 1050 W/ 8 Ohm
• 24 dB Linkwitz Riley crossover
• Input sensitivity 1.4 or 0.775 V
• Big front display for easy handling
• Black out mode switches off the display automatically
• Lock out mode avoids improper use
• Remote power for remotely switching on/ off
• PeakX limiter per channel
• Quiet and temperature controlled fan
• Rugged metal housing
• 5 Status LEDs per channel
• Connectors: XLR, jack and RCA input, 2x speaker twist and binding post outputs
• Size: 19"/ 2 RU
• Installation depth: 19.6 cm
• Weight: 3.9 kg

• Power: 2x 425 W / 4 Ohm, 2x 350 W / 8 Ohm
• Inputs channel 1 and 2: 2x XLR balanced, 2x RCA and 2x 6.3 mm stereo jacks
• Outputs: Speaker Twist combo jacks to 6.35 mm jack, 2 x screw terminals
• 2 Stepped gain controls for precise adjustment
• Frequency range: 20 - 20,000 Hz
• Signal / noise ratio: 100 dB
• Integrated switchable crossover
• Guard rail technology
• Protects against overheating and overloading without disconnecting
• Protective circuits and thermal fuses
• Detachable power cable
• Very low installation depth and low weight
• Dimensions (W x H x D) 483 x 89 x 257 mm
• Format: 19" / 2 U
• Weight: 12.1 kg

• Format: 19" / 2 U
• 2x 300 W / 4 Ohms
• 2x 200 W / 8 Ohms
• 2x 430 W / 2 Ohms
• 1 x 830 W / 2 Ohm stereo or 4 ohm bridged applications
• Balanced TRS, XLR, and barrier strip inputs
• Mono parallel mode
• Speaker Twist and binding post outputs
• Adjustable-/ switchable HP filter
• Switchable limiter
• GND Lift
• Amplifier and circuit protection
• Quiet fan
• Weight: 15.9 kg
• Housing depth: 36 cm
• 3 Year warranty

• Power: 2x 400 Watt / 4 Ohm RMS, 2x 200 Watt / 8 Ohm RMS, 750 Watt /8 Ohm RMS bridged
• Limiter
• XLR and 6.3 mm jack inputs
• Speaker Twist & binding post outputs
• Short-circuit protection
• Design: 19"/ 2U
• Weight: 8.5 kg

• Especially suitable for CURV 500 installations
• 4 x 240 W at 4 ohms
• 4 x 120 W at 8 ohms
• 4 x 60 W at 16 ohms
• Frequency range: 10 - 22,000 Hz
• Each channel can control up to six CURV-500 satellites or one CURV500ISUB subwoofer
• OLED display
• Protection circuits: DC, short circuit, over-current, soft start, thermal overload
• Inputs: 4 x Line, terminal block, XLR
• 4 Speaker outputs
• Dimensions (W x H x D): 482 x 44 x 420 mm
• Weight 6.8 kg
• Format: 19" / 1 U

• Very low installation depth: 259 mm
• Power: 2x 600 W into 4 Ohm, 2x 400 W into 8 Ohm
• Hi-Peak power: up to 1,600 W
• Class-D power amplifier circuit
• Large, illuminated 256p x 128p LC display
• 2 Rotary input knobs and 3 buttons for quick access
• High-pass filter, 4th order Linkwitz-Riley, adjustable frequencies 20 Hz to 4 kHz
• Low-pass filter, 4th order Linkwitz-Riley, adjustable frequencies 60 Hz to 4 kHz
• 4-Band parametric EQ with frequencies
• Gain and bandwidth variable
• Peak Limiter: protects speakers by entering individual power and impedance data
• Delay: maximum 50 ms
• Digital gain: +10 dB / -100 dB
• 20 Presets for the most frequently used loudspeaker configurations, adjustable
• Status LEDs: 2x green: signal/2x red: in-amp clip/1 xblue: mains power
• Inputs: 2x XLR and 2x 6.35 mm stereo jack
• Outputs: 2x NL4, lockable (NL2 compatible) and 2x screw terminals
• Mono or bi-amping connection
• Protection circuits and thermal fuses
• Power supply fused in case of unstable power supply
• Detachable mains cable (C13/grounded plug)
• Dimensions (W x H x D): 483 x 89 x 259 mm
• Construction: 19" / 2 U
• Weight: 5.1 kg

• Class D
• Power: 4x 500 W at 4 Ohm, 4x 250 W at 8 Ohm
• Built-in DSP
• 4 XLR inputs
• 4 Speaker twist outputs
• Format: 19" / 1 U
• Dimensions: 483 x 460 x 44 mm
• Weight: 8.0 kg