Top Ring Modulator, Crossfade Modules
Top Ring Modulator, Crossfade Modules

Top 19+ Ring Modulator / Crossfade Modules 2022

We have created for you a rating of the Best 19 Ring Modulator / Crossfade Modules

Equipment list navigation:

  1. Behringer Modamp Module 1005
  2. Doepfer A-134-2 Dual Vc Crossfader
  3. Doepfer A-184-2
  4. Make Noise ModDemix
  5. Behringer 150 Ring Mod/Noise/S&H/LFO
  6. IO Instruments Pasiphae
  7. Erica Synths Black XFade
  8. Mutable Instruments Warps
  9. Doepfer A-184-1 Vintage Edition
  10. Doepfer A-114
  11. Doepfer A-134-1 Vc Pan MKII
  12. Doepfer A-184-1
  13. Doepfer A-138D
  14. Doepfer A-114 Vintage Edition
  15. Doepfer A-138e
  16. Befaco A*B+C
  17. Erica Synths Pico Ring
  18. EMW Ring Modulator
  19. Erica Synths Fusion VCA/Waveshaper/Ringmod

1. Behringer Modamp Module 1005

Behringer Modamp Module 1005

Behringer Modamp Module 1005; Eurorack module; Ringmodulator and VCA; 2 ignal inputs with level controls; MOD and UNMOD modes for selecting Ringmodulator or Amplifier operation; 2 adjustable CV outputs for controlling external Oscillators; Gate inputs to switch modulation modes; build-in VCA with gain control knob and selector switch for linear or exponential response; power consumption: 60mA (+12V) / 45mA (-12V); width: 16 HP; depth: 43mm


2. Doepfer A-134-2 Dual Vc Crossfader

Doepfer A-134-2 Dual Vc Crossfader

Modular

  • Dual VC Crossfader

3. Doepfer A-184-2

Doepfer A-184-2

Sinus Converter / VC Crossfader

  • Eurorack module
  • Combines two functions in one module: triangle to sine converter as well as voltage-controlled crossfader
  • Power requirement: +30 mA (+ 12V) / -30 mA (-12V)
  • Width: 4 HP

4. Make Noise ModDemix

Make Noise ModDemix

Eurorack Module

  • Two identical, directly coupled balanced modulator circuits that can be used together or independently for ring modulation, VCA, mixer, signal multiplication, voltage controlled polarisation, attenuation and more
  • Several modules can be cascaded
  • 8 LEDs
  • Current consumption: 30mA @ + 12V, 30mA @ -12V
  • Dimensions (W x D): 6 hp x 24 mm

5. Behringer 150 Ring Mod/Noise/S&H/LFO

Behringer 150 Ring Mod/Noise/S&H/LFO

Behringer 150 Ring Mod/Noise/S&H/LFO; Eurorack module; analog Ring Modulator; Noise Generator with two outputs for white noise and pink noise; Sample & Hold section with Clock Out, External Clock In and sliders for Clock Rate and Lag Time; analog LFO with 5 waveforms; sliders for frequency and delay-time; 3 selectabe frequency-ranges (0.03 – 30Hz); CV and trigger input and 2 LFO-outputs; power consumption: 60mA (+12V) / 50mA (-12V); width: 16 HP; depth: 44mm


6. IO Instruments Pasiphae

IO Instruments Pasiphae

IO Instruments Pasiphae; Eurorack module; experimental Ring Modulator; X- and Y-Audio Inputs, each with attenuator; DC coupled CV inputs for X- and Y-Level with attenuator; DC offset control for X- and Y-Channel; Mute switch per channel with CV control; positive and inverted signal output; Peak LED; low distortion circuit design with high headroom; low X and Y feedthrough; power consumption: 60mA (+12V) / 60mA (-12V); width: 12 HP; depth: 25mm


7. Erica Synths Black XFade

Erica Synths Black XFade

XFader Module

  • Manual or CV controlled crossfading between two audio or CV signals
  • 2 Inputs with amplifiers and attenuators
  • Audio / CV mode switch
  • Crossfade status indicator LEDs
  • Power consumption: + 35 mA, -34 mA
  • Dimensions (W x D): 10 HP / 25 mm

8. Mutable Instruments Warps

Mutable Instruments Warps

Eurorack Module

  • Meta-modulator for the mixing and cross-fading of two audio signals on the basis of 9 different algorithms: Crossfade, Crossfolding, Diode Ring modulator, digital Ring modulator, XOR-Modulation, Rectifier and 3 Vocoder modes
  • Timbre control for intensity of the modulation between Input 1 and 2
  • Two Audio-inputs with level control
  • Algorithm selection and Timbre CV-control
  • Internal modulation oscillator is switchable
  • Required power: 110 mA (+12 V) / 5 mA (-12 V)
  • Width: 10 HP (Horizontal Pitch)
  • Depth: 25 mm

9. Doepfer A-184-1 Vintage Edition

Doepfer A-184-1 Vintage Edition

Euro Rack Module

  • Vintage edition with black front plate
  • With three functions: Ring modulator, sample & hold/ track & hold, slew limiter
  • Width: 4 HP
  • Depth 40 mm
  • Power consumption +40 mA (+ 12V)/ -30 mA (-12V)

10. Doepfer A-114

Doepfer A-114

Dual Ring Modulator

Module A-114 contains two separate ring modulators. A ring modulator supplies the product, or multiplication ( X

  • Width: 4TE / 20.0 mm
  • Depth: 40 mm (measured from the back of the front panel)
  • Power requirements: 40mA (12V) / -30mA (-12V)

11. Doepfer A-134-1 Vc Pan MKII

Doepfer A-134-1 Vc Pan MKII

Voltage-Controlled Panning Module

The A-134 is a voltage-controlled panning module. The module consists of 2 linear VCAs, which are inversely controlled by a control voltage, i.e., the more the volume of one VCA increases, the more the volume decreases on the other VCA. The module has 2 audio inputs with an attenuator, which is assigned to both VCAs. If there is nothing plugged into the second input jack (VCA2), then the audio signal of VCA1 will also be used for VCA2. There are 3 audio outputs available: VCA1, VCA2, and Mix (a mixed signal of both VCA outputs). With the A-134, voltage-controlled stereo panning effects (VCA outputs on left / right stereo channels), mono panning effects (e.g., between 2 different audio signals), or a mixture of both functions can be implemented.

The panning function can be controlled manually and via two external control voltages (one of which is equipped with an attenuator). As control signals, the following can be used: LFO (A-145, A-146, A-147), envelopes (A-140, A-141, A-142, A-119), random (A-118), theremin (A-178), foot controller ( A-177), or the voltage of a MIDI-to-CV interface (A-190 or A-191). The panning function is displayed optically via 2 LEDs.


12. Doepfer A-184-1

Doepfer A-184-1

Euro Rack Module

  • With three functions: Ring modulator, sample & hold/ track & hold, slew limiter
  • Width: 4 HP
  • Depth: 40 mm
  • Power consumption +40 mA (+ 12V)/ -30 mA (-12V)

13. Doepfer A-138D

Doepfer A-138D

Crossfader/ FX Insert

  • Can be used as a crossfader between two signals or as an insert for external effects
  • Euro rack format
  • Width: 8 HP
  • Depth: 40 mm
  • Power consumption: +20 mA (+12V)/ -20 mA (-12V)

14. Doepfer A-114 Vintage Edition

Doepfer A-114 Vintage Edition

Dual Ring Modulator

Module A-114 contains two separate ring modulators. A ring modulator outputs the product (multiplication X

  • Vintage edition with black front panel
  • Black front panel
  • Width: 4HP/ 20.0 mm
  • Depth: 40 mm (measured from the back of the front panel)
  • Power Requirements: +40 mA (+ 12V)/ -30 mA (-12V)

15. Doepfer A-138e

Doepfer A-138e

Quad 3-Way Crossfader / Mixer / Polarizer

  • Can be used for attenuating, polarizing and crossfading audio or control signals
  • Eurorack format
  • Width: 19 HP
  • Depth: 30 mm
  • Power requirements: +10 mA (+ 12V) / -10 mA (-12V)

16. Befaco A*B+C

Befaco A*B+C

Eurorack Module

  • Dual four-quadrant multiplier
  • Use as 4-channel mixer, ring modulator, voltage-controlled polariser, VCA, offset generator or adjustable voltage source
  • Power requirements: +40 mA (+12 V) / -40 mA (-12 V)
  • Width: 6 HP
  • Depth: 30 mm

17. Erica Synths Pico Ring

Erica Synths Pico Ring

Erica Synths Pico Ring; Eurorack module; analog RIng Modulator; built-in sinewave modulator with Tune control (normalized to input 2); 2 inputs with attenuator; audio output; power consumption: 10mA (+12V) / 19mA (-12V); width: 3 HP; depth: 35mm


18. EMW Ring Modulator

EMW Ring Modulator

Eurorack Module

  • Classic ring modulator
  • Analog structure
  • Width: 6 TE / HP
  • Depth: 50 mm
  • Volume control for carrier and modulation input
  • Power requirement: +20 mA (+12 V) / -9 mA (-12 V)

19. Erica Synths Fusion VCA/Waveshaper/Ringmod

Erica Synths Fusion VCA/Waveshaper/Ringmod

Erica Synths Fusion VCA / Waveshaper / Ringmodulator; Eurorack module; two audio inputs with Input Fader control; two manual Bias controls for the vacuum tubes and different effects on the audio signal; two Bias CV inputs with attenuators; “Direct” switch for usual VCA mode; Drive control for the main output “OUT 1+2”; independant Ringmodulator, normalized to VCA output; power consumption: 48mA (+12V) / 69mA (-12V); width: 14 HP; depth: 36mm


Write your review and rate this rating The Best 19 Ring Modulator / Crossfade Modules

Top Ring Modulator, Crossfade Modules
Top 19+ Ring Modulator / Crossfade Modules 2022
SOUND QUALITY
95
VALUE FOR MONEY
85
EASE OF USE
94
FEATURES
85
Reader Rating26 Votes
92
90
NFT Hunter and Music Expert
SM Menu

Categories

Subscribe
News, Reviews, Discounts from stores