Switch Pedals

• Gold relay
• Instant access to the loops on the front panel
• Isolated loop for thomann A / B
• Channel switching
• Remote Tap Tempo
• Compact design
• 2 Units can be combined to 19 inches
• Compatible with any midi controller
• Output buffer for long cable lengths
• Silent Switching Technology,
• Suitable power supply available under Art.409939 (not included)
• Handmade in the USA

• With loop for one instrument on up to three amps
• The Lehle 1at3 routes the input signal as a true true bypass switcher via gold-plated relays to up to three outputs (eg. amps, tuners, effects)
• If the input signal is only present on one of the outputs, then the ground connections are connected - ground loops are thereby excluded
• The output C and the socket C-> B can also be used as a loop
• Enabling you to switch to and fro between the pure original signal and the effects loop
• The Lehle 1at3 can be controlled via MIDI and networked with other Lehle SGoS switches
• Power supply available as an option

• Compact, versatile pedal switch
• Controls up to 8 loops and 2 amp channels
• No switching delay
• True bypass relay circuit
• 7 Serial loops and 1 separate loop
• Two latch-type footswitch control outs
• Pop" - suppression circuit
• Instant Mute
• "Mute" switches to tuner output
• 24 programmable presets
• Power supply via 9 V DC power supply (coaxial connection - negative polarity inside, not included in delivery, suitable power supply e.g. Art. 409939)
• Current consumption: 500 mA
• Dimensions (L x W x H): 480 x 60 x 52 mm

• 4 Isolated relay controls
• Separate jack monoboxes
• Multi-DIN connector for modern amplifiers
• Manages all the foot switch functions of the amplifiers
• Phantom powered via GCX or pedal switcher via MIDI working with program and control changes
• Measurements (W x D x H): 158 x 79 x 30 mm
• Connection for standard 9V power supply
• Made in USA

• 2 XLR inputs
• 1 XLR output
• Large foot switch for switching
• Channel A 0 / -15 dB switchable
• Channel B 0 / -15 dB and 0 / -6 dB switchable
• Gnd / Lift switched to input B
• Rugged metal casing
• Operation with 9 V battery
• Dimensions: 100 x 60 x 120 mm

• A mixer in its smallest possible format
• Inputs are designed specifically for electric guitars in level and impedance
• But of course they work just as well with other instruments and devices that supply line levels
• Makes it possible to input two sources and to actively mix them together on a common amplifier input
• Inputs: 2 x unbalanced 6.3 mm jack
• Input impedance: 1 M Ohm
• Max. Input Level: 1.55 V (+6 dBu)
• Output: 1x unbalanced 6.3 mm jack
• Output impedance: 10 k Ohm
• Amplification: max. X "2" (6 dB)
• Power supply via 9V battery (417473) or external 9V power supply (409939) (both optional)

• Balanced ABY foot signal switch
• 2 XLR Inputs
• 1 XLR Output
• Large foot switch for switching
• 15 dB pad per channel switchable
• -3 dB Trim and Gnd / Lift to Input B
• Robust metal casing
• Colour: Black

• Can be used as an A / B box or mute switch
• True bypass
• Bypass foot switch
• Status LED
• 6.3 mm Mono jack input / output
• 6.3 mm Mono jack send / return
• Power supply via optional 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
• Passive operation without power supply possible (status LED without function)
• Current consumption 1 mA
• Metal housing
• Dimensions (L x W x H): 101 x 53 x 49 mm
• Weight: 127 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• Deluxe switching box with mechanical True Bypass, soft switching, high quality and low noise buffers, volume control for all input signals
• High dynamics and a multitude of possible configurations for all signal routing requirements
• True bypass
• Controls: A Level, Dry Level, B Level
• Switch: serial / parallel
• LED: Effect On
• Footswitch: A / B
• Effect Bypass, A + B
• Input and output: 6.3 mm jack
• Return & Send A: 2x 6.3 mm jack
• Return & Send B: 2x 6.3 mm jack
• Current consumption: 165 mA
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm coaxial connection, polarity (-) inside
• Dimensions (W x D x H): 121 x 146 x 64 mm
• Includes power supply unit

Note: Battery operation is not supported.

• Can be used as an input or output selector switch
• Input and outputs can be used in both directions
• True bypass
• Bypass foot switch
• Status LEDs
• Metal housing
• 1 x 6.3 mm mono jack input
• 2 x 6.3 mm mono jack output
• Power supply via 9 V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
• Passive operation without power supply possible (status LED without function)
• Current consumption: 1 mA
• Dimensions (L x W x H): 101 x 54 x 48 mm
• Weight 140 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• 8 Jack inputs for 8 foot switch
• Powered via MIDI

• Allows switching between different instruments in stereo via gold-plated contact relays
• Without semiconductors, the signal from inputs A, B or C pass through outputs 1 or 2 unaltered. This makes it easy to switch between an amp and a tuner
• Can be controlled via MIDI and networked with other Lehle SGoS switches
• True bypass
• LED: Effects On
• Footswitch: Effects bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply port (coaxial socket, 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: 97 mA
• Powered via 8-20 V DC power supply (not included, suitable power supply available under Article Nr 409939 (not included))
• Dimensions (W x D x H): 156 x 103 x 47 mm
• Weight: 735 g
• Made in Germany

Note: Battery operation is not supported.

• The footswitches provide control over six independent loops and a separate tuner output
• Extremely simple and intuitive programming
• 36 Freely configurable presets, 6 banks, 6 presets per bank
• 2 Selectable switching modes: Play mode, live mode
• Switchable pre- and post-position buffer prevents signal loss
• Built-in tuner
• True bypass / buffered bypass (switchable)
• 7 Footswitches
• 4 Push-button switches for programming presets and switching buffers
• Status LEDs
• Inputs / outputs: 6.3 mm mono jack
• Power supply via 9 V DC mains adapter (2.1 mm x 5.5 mm barrel connector, polarity (-) inside)
• Current consumption: max. 300 mA
• Metal housing
• Dimensions (L x W x H): 97 x 370 x 54 mm
• Weight: 1.15 kg
• Incl. power supply unit

Note: Battery operation not supported.

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

One Control Minimal Series MIDI Dual Stereo Loop - True Bypass Looper; stereo true bypass looper for effect pedals, bypass switching via MIDI, can use between 1-8 MIDI channels to receive control signals, can be controlled via Program Change (PC) or Control Change (CC) signals, mono and stereo signals can be processed variably, true bypass, status LEDs, metal housing, 6.3 mm stereo jack input / output (TRS), 6.3 mm stereo jack send / return (TRS), 5-pin MIDI input, power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside, battery operation not supported, current draw max. 120 mA, dimensions (L x W x H) 68 x 125 x 32 mm / 2.68" x 4.92" x 1.26", weight 366 g / 0.81 lbs

• For two amps plus tuner with high impedance LTHZ transformer and gain reduction
• The Lehle Dual switches the signal via gold-plated relays to outputs A, B or T
• Outputs A and B can be operated at the same time on two different amps, since A to B is galvanically isolated by the high-end transformer Lehle LTHZ - ground loops are thereby excluded
• With the potentiometers, the outputs A and B can be attenuated separately
• The output T is available for a tuner or a third amp
• The two inputs can be stereo-routed to outputs A and B.
• In addition, the Lehle Dual has a gold-plated phase reversal and a ground switch
• The Lehle Dual can be controlled via MIDI and networked with other Lehle SGoS switches
• Power supply available as an option

• A/B/Y Switcher / Splitter
• Active working method
• Output transformer eliminates hum - no ground lift necessary
• FET transistors for silent switching
• AB foot-switch
• Y foot-switch
• Status LEDs
• Metal casing
• 6.3 mm Mono jack inputs
• 2x 6.3 mm Mono jack output
• Power supply via 9 V power supply unit (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included in delivery)
• Power consumption of less than 100 mA
• Dimensions (W x D x H): 115 x 65 x 51 mm
• Weight: 300 g
• Made in USA

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Lehle P-Split III; Splitter, DI box and problem solver; high-impedance Lehle Transformer HZ with phase and ground switch; can be used unbalanced or balanced; passive - does not require a power supply, Applications: Split an input signal to the two outputs with galvanic isolation (no ground loop); elimination of unwanted humming noise; passive Mono Summer for stereo signals; Connections: Input (1/4" TRS-Jack), DIR Output (1/4" TRS-Jack), ISO Output (1/4" TRS-Jack); Dimensions (W x D x H): 92 x 90 x 37 mm (3,62" x 3,54" x 1,46"); Weight: 375 g (0,83 lbs)