We have created for you a rating of the Best 15 Synthesizer Modules
Equipment list navigation:
- Intellijel Designs Atlantis
- Doepfer A-111-6
- Radikal Technologies Delta CEP A
- Erica Synths Pico System III Module
- Doepfer A-111-5 Vintage Edition
- Erica Synths Pico Voice
- Doepfer A-111-5 Synthesizer Voice
- Behringer 110 VCO/VCF/VCA
- Mutable Instruments Elements
- Doepfer A-111-6 Vintage Edition
- Erica Synths Bassline
- 1010music synthbox
- Make Noise tELHARMONIC
- Malekko Manther Growl
- Roland System-500 510
1. Intellijel Designs Atlantis
Subtractive Synthesiser Voice
- Modulation VCO: Triangle core with 4 waveforms, noise, S & H, hard sync and link switch for pitch synchronization between Mod VCO and VCO
- VCO: triangle core with hard sync, octave switch, linear or
- Exponential frequency modulation and PW modulation
- 2/4-Pole multi-mode filter
- ADSR envelope with loop function and two switchable speeds
- Mixer section with sub-oscillator, white or pink noise and external input
- Width: 40 HP
- Depth: 38 mm
- Power requirement: +214 mA (+12 V) / -196 mA (-12 V)
2. Doepfer A-111-6
Eurorack Synthesiser Voice
- Classic layout with VCO, VCF, VCA and envelope generator
- VCO waveforms: sawtooth, triangle, and variable pulse square
- Modulation input for FM or PWM
- Sub-octave or external signal can be mixed
- 24 dB low-pass filter with filter frequency, modulation depth and resonance control
- VCA with gain control, controllable by gate signal or internal envelope
- Envelope with modes AD, ADSR and AR
- Patch points to control each section
- Width: 10 HP
- Depth: 50.5 mm
3. Radikal Technologies Delta CEP A
Eurorack Module
- Paraphone synthesizer voice
- Digital Swarm oscillator with up to 8 tunable oscillator clones
- Free cross-fading between waveforms
- TLM modulation, FM, tone scale quantization
- Up to 4 voices paraphon playable
- LFO with 4 waveforms
- Random voltage and synchronization
- Analogue 12 dB multimode filter with low pass
- Band-pass
- High-pass
- Digital 24 dB low pass filter
- ADSR envelope
- VCA section
- Digital delay
- Memory for 40 programs with 8 snapshots each
- Snapshot morphing
- MIDI to CV interface
- 27 Patch points for connecting to modular systems and other equipment
- Power requirement: 140 mA (+12 V) / 50 mA (-12 V)
- Width: 68 TE
4. Erica Synths Pico System III Module
Eurorack modular system
- Fully analogous structure
- Plug-in connections can be stored via pluggable voice cards (5x preset cards and 5x DIY cards included)
- Current consumption: 175 mA (+12 V) / 112 mA (-12 V)
- Width: 42 HP
Contains:
- Step sequencer
- 2x VCO
- 2x Mixer
- LFO
- Sample & hold
- Noise & random generator
- 2x function generator
- 2x Low-pass gate
- BBD delay & output section
5. Doepfer A-111-5 Vintage Edition
Doepfer A-111-5 Vintage Edition; Eurorack module; complete monophonic synthesizer voice; VCO with sawtooth, pulse and triange waveforms; adjustable pulsewidth; PWM via LFO1 or ADSR envelope; VCO frequency range: 30Hz – 10kHz; lowpass filter (-24dB/oct.) with resonance; switchable filter tracking; linear and exponential filter FM; VCA with AM via LFO1 or ADSR envelope; ADSR envelope generator with three selectable time-ranges; two LFOs, each with triangle and square waveforms and three selectable frequency ranges; outputs for LFO1, ADSR and main audio signal; power consumption: 80mA (+12V) / 50mA (-12V); width: 24 HP; depth: 40mm; black front panel
6. Erica Synths Pico Voice
Eurorack Module
- Compact synthesizer voice
- 8 Sound generation algorithms: Karplus Strong, Chords, Wavetable, TB303 Bassline Emulation, PWM, Supersaw, Wavefold and Harmonic Saturation
- Tune controller and 2 adjustable parameters per algorithm
- Assignable CV input
- Power requirement: 28 mA (+12 V) / 5 mA (-12 V)
- Width: 3 HP
- Depth: 35mm
7. Doepfer A-111-5 Synthesizer Voice
Doepfer A-111-5 Synthesizer Voice; Eurorack module; complete monophonic synthesizer voice; VCO with sawtooth, pulse and triange waveforms; adjustable pulsewidth; PWM via LFO1 or ADSR envelope; VCO frequency range: 30Hz – 10kHz; lowpass filter (-24dB/oct.) with resonance; switchable filter tracking; linear and exponential filter FM; VCA with AM via LFO1 or ADSR envelope; ADSR envelope generator with three selectable time-ranges; two LFOs, each with triangle and square waveforms and three selectable frequency ranges; outputs for LFO1, ADSR and main audio signal; power consumption: 80mA (+12V) / 50mA (-12V); width: 24 HP; depth: 40mm
8. Behringer 110 VCO/VCF/VCA
Behringer 110 VCO/VCF/VCA; Eurorack module; analog synthesizer voice; VCO with Triangle, Sawtooth and Pulse waveforms, adjustable pulsewidth with CV input, octave switch and fine-tune control, 2 CV inputs with attenuators; Lowpass filter with resonance, 2 signal inputs and 2 CV inputs with attenuators; VCA with 2 signal inputs and 2 CV inputs with attenuators, Initial Gain control and Low/High signal outputs; power consumption: 80mA (+12V) / 50mA (-12V); width: 16 HP; depth: 46mm
9. Mutable Instruments Elements
Eurorack Module
- Physical modelling synthesis voice
- Elements uses three mixable tone generators (inspired by stringed instruments, wind instruments and percussive impulses) to excite a tuneable modal resonator (built as a 64-band filter bank)
- The resonator can be adjusted and modulated in terms of material, shape and condition by several parameters
- Integrated stereo reverb effect
- Processing external audio signals possible
- Power requirements: +130 mA (+12 V) / -10 mA (-12 V)
- Width: 34 HP
- Depth: 25 mm
10. Doepfer A-111-6 Vintage Edition
Eurorack Synthesizer Voice
- Back faceplate
- Classic structure with VCO, VCF, VCA and envelope generator
- VCO waveforms: sawtooth, triangle and square with variable pulse width
- Modulation input for FM or PWM
- Sub-octave or external signal can be added
- 24dB low pass filter with control for filter frequency, modulation depth and resonance
- VCA with gain control
- Controllable by gate signal or internal envelope
- Envelope with operating modes AD, ADSR and AR
- Patch points for controlling each individual section
- Width: 10 HP
- Depth: 50.5 mm
11. Erica Synths Bassline
Eurorack Module
- Analog synthesizer voice for bass and lead sounds
- VCO with three waveforms (sawtooth, rectangle, triangle)
- Suboscillator
- Erica Synths Acidbox Filter (Lowpass / Bandpass)
- VCO beats simulated via BBD circuit
- VCA with decay envelope and accent input
- CV input for FM and VCF
- Power requirement: 110 mA (+12 V) / 70 mA (-12 V)
- Width: 14 TE
- Width: 35 mm
12. 1010music synthbox
4-Note Polyphonic Synthesizer for Eurorack Systems
- 8 Wavetable oscillators (2 per voice)
- 4 Waveform oscillators (1 per voice)
- 2 Envelopes, 2 LFOs and 1 step sequencer per voice
- 100 Wavetables
- Own wavetables can be loaded as wav-files via micro-SD-card
- Effects: Flanger, Distortion and Stereo Delay
- 50 Presets
- Module can be converted by loading another firmware into a full-fledged bitbox (Article Nr
- Width: 26 HP
- Depth: Compatible with Skiff cases
- Power requirements: + 350MA (+ 12V)/-0mA (-12V)
- Incl. 4GB microSD card
13. Make Noise tELHARMONIC
Eurorack Module
- Multi-voice multi-algorithm synthesiser module programmed by Tom Erbe: three-voice additive harmonic synthesis inspired by Thaddeus Cahill’s Telharmonium of 1897, sound synthesis inspired by the early computer music piece “Analog 1: Noise Study” by James Tenney from 1961 as well as three voices Phase modulation synthesis inspired by early commercial digital synthesis of the 80s
- All algorithms are available at their respective outputs at the same time
- 6 Octaves continuous 1V / oct. Pitch control, 4 octaves of quantized pitch control
- 3 Voice Shift Register allows you to create any 3-tone chords within the twelve-tone scale
- DEGREE modulation, synchronizable with clock or gate via D-gate input
- Gate output
- Integrated DSP with 24-bit / 48 kHz codec, 32-bit floating-point processing
- Current consumption: 139mA @ + 12V, 10mA @ -12V
- Dimensions (W x D): 14 hp x 30 mm
14. Malekko Manther Growl
Eurorack module
- Analog synthesizer voice on CEM3340 basis
- VCO with pulse, sawtooth and triangle waveforms and wave shaper
- Resonant low pass filter
- LFO with 5 waveforms: Sine, Rectangle, Sawtooth, Ramp and Random
- 2 Envelopes for VCA and VCF
- Filter input for external sources
- 1 V/oct. input
- CV inputs for waveform levels
- Waveshaper Intensity and PWM
- CV inputs for filter frequency
- Resonance and VCA level
- Trigger inputs for both envelopes
- CV outputs from both envelopes and LFO
- Audio outputs for all 3 VCO waveforms and VCA main output
- Current consumption: 300 mA (+12 V) / 200 mA (-12 V)
- Width: 26 TE
15. Roland System-500 510
Eurorack Module
- Analogue synthesiser voice consisting of VCO, VCF and VCA based on the Roland System 100m
- VCO with outputs for triangle, sawtooth and square wave (with pulse width modulation)
- Classic Roland low-pass filter with resonance control, two mixable audio inputs and two modulation inputs
- Two-stage switchable high-pass filter
- VCA with two mixable inputs
- Two outputs and switching between linear and exponential response
- Power requirement: 75 mA (+12 V) / 60 mA (-12 V)
- Width: 20 HP
- Height: 57.2 mm
Write your review and rate this rating The Best 15 Synthesizer Modules
