Top Various Modules
Top Various Modules

Top 30+ Various Modules 2022

We have created for you a rating of the Best 30 Various Modules

Equipment list navigation:

  1. Mutable Instruments Marbles
  2. Intellijel Designs Planar 2
  3. Mutable Instruments Blinds
  4. Intellijel Designs Scales
  5. Behringer 297 Dual Portamento/CV Util.
  6. Befaco Muxlicer
  7. Klavis CalTrans
  8. Frap Tools 321
  9. Vermona Modular quadroPOL
  10. Make Noise ModDemix
  11. Make Noise Wogglebug
  12. Erica Synths Black Joystick 2
  13. Behringer CP1A
  14. Tiptop Audio uZeus
  15. Robaux 3PT
  16. Erica Synths Pico Quant
  17. ADDAC 207 Intuitive Quantizer
  18. Behringer CP3A-O OSC Controller
  19. Joranalogue Audio Design Select 2
  20. Intellijel Designs Octalink 1U
  21. Doepfer A-171-2
  22. Endorphin.es Power
  23. ACL Oktave
  24. Doepfer A-150-8
  25. ADDAC 805VS2 VC Signal Router
  26. Doepfer A-197-3
  27. Erica Synths Black CV Tools
  28. Intellijel Designs Shifty
  29. Befaco Sampling Modulator
  30. XAOC Devices Samara II

1. Mutable Instruments Marbles

Mutable Instruments Marbles

Random Gate and CV Generator Module

  • 3 Gate outputs
  • Either clocked by the 3 outputs of the random number generator or by a common external clock
  • Internal clock with adjustable rate (with V / O CV input) or division / multiplication of an external clock
  • 3 Channels of random voltages, each clocked by the individual outputs of the t-section or by a common external clock signal
  • Random voltages can be quantized
  • DEJA VU controls the likelihood that past material will be reused instead of collecting new random data
  • Width: 18 TE / HP
  • Depth: 25 mm
  • Power requirement: +80 mA (+12 V) / -20 mA (-12 V)

2. Intellijel Designs Planar 2

Intellijel Designs Planar 2

Eurorack Module

  • Joystick CV controller
  • Unipolar and bipolar X / Y outputs
  • 4 Quadrant outputs A-D (0 V – 10 V)
  • 4 Inputs for audio and control signals for use as a vector mixer, quadraphonic pan controller or crossfader
  • Generation of gate signals by push button or joystick movements
  • CV Recorder: Joystick gestures can be recorded for up to 30 seconds
  • Playback of joystick movements as Loop and One Shot, synchronized to external triggers
  • Power requirement: 85 mA (+12 V) / 32 mA (-12 V)
  • Width: 14 TE
  • Depth: 40 mm

3. Mutable Instruments Blinds

Mutable Instruments Blinds

Eurorack Module

  • 4-Channel VC Signal Polarizer
  • Flexible tool for attenuation, inversion, and mixing of CV- and Audio signals
  • Each channel can be used as a ring modulator (4 quadrant multiplier) or bipolar VCA
  • Usage as a mixer is possible
  • Functional as a voltage source and offset source if the channel input is not in use (Range: -5 V to +5 V)
  • Power requirements: 70 mA (+12 V) / 70 mA (-12 V)
  • Width: 12 HP
  • Depth: 25 mm

4. Intellijel Designs Scales

Intellijel Designs Scales

Eurorack Module

  • 2-Channel quantizer and sequencer
  • Quantize any CV signals to a user-programmable tone scale
  • Quantization can be synchronized via trigger input
  • Two outputs A & B enable the formation of harmonic intervals – controllable via the shift input
  • Step-sequencer with up to 128 steps
  • Memory for 35 patterns
  • Sequencer can be synchronized to Quantizer events
  • Width: 8 TE

5. Behringer 297 Dual Portamento/CV Util.

Behringer 297 Dual Portamento/CV Util.

Eurorack Module

  • 2 Portamento sections
  • Each section with signal input / output and adjustable portamento time (10 ms – 3 s) and CV input
  • Two mixer sections, each with 4 channels, normal and inverted output and mixable fixed voltages (-10 V to +10 V)
  • Power requirement: 70 mA (+12 V) / 60 mA (-12 V)
  • Width: 16 HP

6. Befaco Muxlicer

Befaco Muxlicer

Befaco Muxlicer; Eurorack module; signal processor with bidirectional switch and gate-generator; consists of the three sections Step-Controller, Gate-Generator and Analog-Switch; Muxlicer can be used as a voltage controlled signal router (8-to-1 or 1-to-8), CV sequencer, audio-chopper, rhythmic pattern generator and much more; power consumption: 45mA (+12V) / 5mA (-12V); width: 16 HP; depth: 23 mm


7. Klavis CalTrans

Klavis CalTrans

Eurorack-Modul

  • 4-Kanal Oszillator-Kalibrator
  • misst und kalibriert die Pitch-CV-Kennlinie von bis zu 4 Oszillatoren und korrigiert diese für oktavreines Tracking
  • Oktav- und Halbtonwahl über 10 Oktaven
  • Portamento und Glissando pro Kanal einstellbar: 0 – 10 Sek.
  • eingebauter chromatischer Quantisierer
  • 4 Speicherplätze für Transponierung
  • Glissando und Portamento Einstellungen
  • Strombedarf: 44 mA (+12 V) / 8 mA (-12 V)
  • Breite: 6 TE
  • Tiefe: 36 mm

8. Frap Tools 321

Frap Tools 321

Scale, Flip und Shift-Modul

  • Modul besteht aus 3 Kanälen
  • pro Kanal verfügbar: +6 dB Pegelanhebung, Invertierung der Phase, DC-Offset-Potentiometer
  • DC-Offset-Generator arbeitet als CV-Quelle, solange kein Kabel im Eingang steckt
  • Summenausgang mit -6dB Dämpfungsgliedern für Audio und selbst generierte Spannungen
  • für Audiosignale und Steuerspannungen geeignet
  • Breite: 6 TE / HP
  • Tiefe: 38 mm
  • Strombedarf: +48 mA (+12 V) / -48 mA (-12 V)

9. Vermona Modular quadroPOL

Vermona Modular quadroPOL

Eurorack-Modul

  • 4-kanaliges Multifunktionsmodul
  • jeder Kanal kann bei belegter Eingangsbuchse als manueller Abschwächer oder Inverter genutzt werden
  • ohne Signal liegt am Ausgang eine einstellbare Spannung an (-5 Volt bis + 5 Volt)
  • VCA Funktionalität bei Verwendung des CV-Eingangs, wobei positive Spannungen den Abschwächer in eine positive Richtung öffnen, negative Spannungen eine Invertierung bewirkt
  • lineare Regelcharakteristik der CV-Eingänge
  • Ringmodulator Funktionalität bei Verwendung eines Audiosignals am CV-Eingang
  • Erzeugung eines spannungsgesteuerten Mixers mit max. vier Kanälen durch Umsetzen von Jumpern auf der Leiterplatte (Normalisierung der Ausgänge benachbarter Kanäle auf den Eingang des darunter liegenden)
  • Stromaufnahme: -12 V 35 mA, +12 V 45 mA
  • Abmessungen (B x T): 10 hp x 30 mm

10. Make Noise ModDemix

Make Noise ModDemix

Eurorack Module

  • Two identical, directly coupled balanced modulator circuits that can be used together or independently for ring modulation, VCA, mixer, signal multiplication, voltage controlled polarisation, attenuation and more
  • Several modules can be cascaded
  • 8 LEDs
  • Current consumption: 30mA @ + 12V, 30mA @ -12V
  • Dimensions (W x D): 6 hp x 24 mm

11. Make Noise Wogglebug

Make Noise Wogglebug

Eurorack Module

  • Random-voltage generator
  • Allows all random signals to be synchronised with a clock
  • Two VCOs, Phase Lock Loop, Lag Processor, Clock, Burst Generator and Sample & Hold
  • Generates seven random signals simultaneously: Smooth VCO, Woggle VCO, Ring Mod, Stepped, Smooth, Woggle, Burst
  • Generates extremely stable master clock
  • Inputs for Sample & Hold (Heart IN) and Ring-Mod (Influence)
  • Current consumption: 50mA @ + 12V, 40mA @ -12V
  • Dimensions (W x D): 10 HP x 24 mm

12. Erica Synths Black Joystick 2

Erica Synths Black Joystick 2

Erica Synths Black Joystick 2; Eurorack module; Joystick with 8 CV outputs (4 channels, each with outputs for X and Y axis); 2 Gate outputs; Joystick motion recorder with 8 sec. recording time for each channel; LFO and Drone Oscillator modes; CV output range:-5V to +5V; LFO frequency range: 0.1Hz – 10Hz; Drone Oscillator frequency range: 50Hz – 1kHz; power consumption: 71mA (+12V) / 20mA (-12V); width: 12 TE; depth: 30mm


13. Behringer CP1A

Behringer CP1A

Power supply module for Eurorack systems

  • Control LEDs for +12 V, -12 V and +5 V.
  • Slots for 2 Flying Bus Boards with 7 slots each
  • Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V)
  • Width: 4 HP
  • Depth: 52mm
  • Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each

14. Tiptop Audio uZeus

Tiptop Audio uZeus

Power Supply Module for Eurorack Systems

  • Two flying bus boards; each with 5 slots
  • Width of the module: 4 TE / HP
  • Depth: 36 mm

Note: Requires additional external power supply boost adapter (item


15. Robaux 3PT

Robaux 3PT

Robaux 3PT; Eurorack module; 3-channel Multimode Controller; three trimpots for each channel to define Minimum, Offset and Maximum values; CV control knob with LED rings to control all three channels simultaniously (also via CV input); 7 selectable modes: Mactro Controller, 3-channel LFO, Chord Generator, Quantizer, Random Generator, Sequencer and Euclidean Pattern Generator; power consumtion: 20mA (+12V) / 0mA (-12V); width: 10 HP; depth: 25mm


16. Erica Synths Pico Quant

Erica Synths Pico Quant

Eurorack Module

  • Compact quantiser module
  • Storage locations for 8 scales
  • Web editor available for creating your own scales
  • Adjustable quantisation tolerance in the range of 10% – 50%
  • Adjustable glide time
  • Connections: Clock In, Clock Out, CV In and CV Out
  • Power requirement: 25 mA (+12 V) / 6 mA (-12 V)
  • Width: 3 HP
  • Depth: 35mm

17. ADDAC 207 Intuitive Quantizer

ADDAC 207 Intuitive Quantizer

Eurorack Module

  • 4-Channel quantiser with 10 octaves tuning range
  • Keyboard mode – uses the 12 buttons as a keyboard
  • Freely definable user scales programmable
  • Programmable chord mode
  • Adjustable gate time
  • Tuning control over up to 4 oscillators with transposition, microtuning and 5 selectable tempering
  • Power requirement: 140 mA (+12 V) / 70 mA (-12 V)
  • Width: 10 HP
  • Depth: 52mm

18. Behringer CP3A-O OSC Controller

Behringer CP3A-O OSC Controller

Behringer CP3A-O OSC Controller; Eurorack module; 4 CV inputs; CV input 4 with attenuator; 4 switches to switch and sum CV signals; 3 CV outputs with identical signal; width: 8 HP; current consumption: 5 mA (+12 V) / 5 mA (-12 V)


19. Joranalogue Audio Design Select 2

Joranalogue Audio Design Select 2

Eurorack Module

  • 2-Channel CV processor
  • Processes CV and audio signals
  • Per channel: polarisation knob, 2 signal inputs, hold input, select input, unity input and processor output
  • Applications: attenuate, mix and invert signals
  • A / B switch
  • On / off switch
  • Offset generation and more
  • Power requirement: 25 mA (+12 V) / 25 mA (-12 V)
  • Width: 6 HP
  • Depth: 43 mm

20. Intellijel Designs Octalink 1U

Intellijel Designs Octalink 1U

Patch module for Eurorack Cases

  • Connects up to 8 audio and CV-/Gate signals between two cases over an RJ45 ethernet cable
  • Compatible with Doepfer A-180-9 Multicore Module (Article Nr.
  • Passive design
  • Sold as a pair of modules
  • Dimensions (W x D): 14 HP x 14 mm
  • Includes 1m ethernet cable

21. Doepfer A-171-2

Doepfer A-171-2

Voltage Controlled Slew Processor / Generator

  • Adjustable slew-up time
  • Incremental curve switchable (linear / exponential)
  • Eurorack format
  • Power requirements: +30 mA (+ 12V) / -30 mA (-12V)
  • Width: 8 HP / 40.3 mm
  • Depth: 60 mm (measured from the back of the front panel)

22. Endorphin.es Power

Endorphin.es Power

Eurorack Module

  • Compact power supply for small Eurorack systems
  • Performance indication: 1 A @ + 12 V / 700 mA @ -12 V
  • Flying Bus Board with slots for 5 modules (40 cm)
  • Power supply via external power supply: 12 V – 20 V DC (not included)
  • Integrated passive 2x 3 multiple
  • Width: 2 U
  • Depth: 42 mm

23. ACL Oktave

ACL Oktave

Eurorack Module

  • Octave switching and precision transposition
  • Pitch control for up to 4 oscillators
  • 3 CV inputs are added and allocated over 4 outputs and 1 inverted output
  • Transposition of rotary switch from +/- 4 octaves and transposition of fine tuning knob from +/- 7 semi-tones possible
  • Power requirement: 7 mA (+12 V) / 3 mA (-12 V)
  • Width: 6 HP
  • Depth: 20 mm

24. Doepfer A-150-8

Doepfer A-150-8

Octal Voltage Controlled Switch

  • Eight manual or CV controllable switches
  • Shared output / input (O / I) and two inputs / outputs (I / O1, I / O2) per switch
  • Functions of inputs and outputs are interchangeable
  • Two modes: toggle or level
  • Possible to chain multiple channels from the master / slave function
  • Width: 12 HP
  • Depth: 55 mm
  • Power requirement: +40 mA (+12 V) / -5 mA (-12 V)

Note: A protective resistor in each O / I line can cause voltage drops when transmitting CV voltages. When transferring pitch control signals to a VCO, it is therefore advisable to insert a CV buffer (e.g. Art.


25. ADDAC 805VS2 VC Signal Router

ADDAC 805VS2 VC Signal Router

Eurorack Module

  • Voltage controlled signal router
  • 2 Channels with 2 inputs each and crossfader
  • Stereo master VCA with crossfader and 2 direct inputs
  • All three crossfaders with CV input and bipolar attenuator
  • Mono master output for use as a 6-channel mixer
  • Suitable for audio and CV signals
  • Power requirement: 40 mA (+12 V) / 40 mA (-12 V)
  • Width: 8 HP
  • Depth: 45mm

26. Doepfer A-197-3

Doepfer A-197-3

Eurorack Module

  • Controller module for RGB LED Strips
  • Brightness control for red, green, blue
  • CV input for red, green, blue with attenuator
  • Input for external 12V power supply (optional)
  • Suitable for LED strips with 12 V power supply and common anode/+12 V with 4 pin cable (+12 V R/G/B)
  • Power requirements: 800 mA (+12 V) / 20 mA (-12 V)
  • Provides feedback when maximum LED brightness has been reached
  • Width: 4 HP
  • Depth: 45 mm

Note: 1m LED strip included as free add-on. Warranty does NOT apply.


27. Erica Synths Black CV Tools

Erica Synths Black CV Tools

Eurorack Module

  • Analog CV and audio processor for a wide range of tasks
  • Contains two separate 3-channel Unity Gain mixers
  • Two attenuators / boosters and two bipolar offset controls
  • Different operating modes configurable by Jumer
  • 2 x 3 Inputs for mixer A & B
  • Outputs for Mix A & B
  • Outputs for Scale A & B
  • Outputs for minimum / maximum values of both mixers
  • Current consumption: 42 mA (+12 V) / 38 mA (-12 V)
  • Width: 10 TE
  • Depth: 35 mm

28. Intellijel Designs Shifty

Intellijel Designs Shifty

Module

  • Combination of four S & H stages, sequential gate and sequencer controller
  • Voice allocate mode: From monophonic melodies pseudo-polyphonic sequences can be generated
  • Shift Register Mode: To create chords – each newly received gate input causes the current CV value to shift one channel further
  • Manual reset button and socket
  • Gate input can be switched between sample-and-hold or track-and-hold
  • Width: 6 TE / HP
  • Depth: 40 mm
  • Electricity requirement: +49 mA (+12 V) / -4 mA (-12 V)

29. Befaco Sampling Modulator

Befaco Sampling Modulator

Befaco Sampling Modulator; Eurorack module; multi-function module for modifying CV and audio signals; can be used as VCO, trigger generator, complex Sample & Hold, waveshaper, down-sampler, 8-step sequencer and more; internal VCO with Rate and Fine tuning controls; 8 switches for internal stepsequencer (on / off / reset); selector switch for internal or external clock; connections: signal input, clock in, pitch-CV in, hold in, clock out, trigger out, signal output; power consumption: 48mA (+12V) / 18mA (-12V); width: 8 HP; depth: 47 mm


30. XAOC Devices Samara II

XAOC Devices Samara II

Eurorack Module

  • Utility waveform processor for CV and audio signals
  • Functions: Mixing, Inverting, Offset Generation, Minimum / Maximum Analysis, Signal Limitation, Signal Scanning, Sample & Hold
  • 4 Channels with 2 inputs each
  • Exit and attenuator
  • 5V offset switchable for channels 1 & 2
  • Power requirement: 50 mA (+12 V) / 20 mA (-12 V)
  • Width: 10 U
  • Depth: 20 mm

Write your review and rate this rating The Best 30 Various Modules

Top Various Modules
Top 30+ Various Modules 2022
SOUND QUALITY
99
VALUE FOR MONEY
85
EASE OF USE
96
FEATURES
88
Reader Rating42 Votes
100
92
NFT Hunter and Music Expert
SM Menu

Categories

Subscribe
News, Reviews, Discounts from stores