|
|
Vocal Processor Pedal
- Echo and slapback effects
- 13 Different effects (2x slap, 3x echo, 6x tap, 2x FX)
- Filter control
- XLR microphone input with 24V phantom power
- Recessed gain control (prevents accidental adjustment)
- Balanced XLR output
- USB port (connects to VoiceSupport application for tips, tricks and updates)
- Mic-control connector (effect on/off via TC-Helicon MP-75 microphone)
- All pedals of the Voice Tone series can be connected to each other (Daisychain), with the first pedal taking over the master volume
- Includes power supply
|
Price History: TC-Helicon VoiceTone E1
121.23 £ |
|
|
Roland E-4; AIRA Compact Voice Tweaker; Vocal Effects Processor; sliders for direct acces on Pitch and Formant parameters; selektable additional effects: Auto Pitch, Harmony and Vocoder; adjustable Scatter effect for rhytmic modulations; adjustable master effect (Reverb, Echo, Tempo Delay and Chorus); 24-Second looper with unlimited overdubbing, undo/redo, and auto BPM detection; MIDI control over pitch, harmony and vocoder parameters; low-cut filter and noise gate to eliminate unwanted noise; microphone input with gain control knob (6.3mm jack); Mix input (3.5mm TRS jack); Line/Headset output (3.5mm TRRS jack, CTIA); Sync input/output (3.5mm jack); MIDI In/Out (3.5mm TRS jack, Type A); USB-C port for USB Audio/MIDI and power; build-in Lithium-ion battery with up to 3.5 hours of operation per charge; dimensions (WxDxH): 188 x 106.5 x 41.7mm; weight: 290g; included: USB cable
|
Price History: Roland E-4
134.16 £ |
|
|
Drifting Memory Station
- Creative looper and performance effects unit for meditative soundscapes
- Audio is recorded into a network of multiple delay lines, modulated by LFO
- Loop times vary between 2.5s - 22s depending on algorithm
- 4 Different algorithms with three variations each: 2 delay lines with relative shift, 4 delay lines with relative shift, Giant Reverb and Granular Delay
- Blur and Drift knobs control different parameters in the algorithms
- Adjustable suppressor / compressor effect
- Controls for drive, feedback, input and output levels
- High-pass and low-pass filters can be activated via footswitch (3 frequencies per filter selectable)
- Foot switches for Erase, Reverse and Record
- Internal signal processing with 24Bit / 48kHz
- Stereo input: 2x 6.3 mm TRS
- Stereo output: 2x 6.3 mm TRS
- Stereo headphone output: 6.3 mm TRS
- Dimensions (W x D x H): 342 x 153 x 68 mm
- Weight: 2.2 kg
- Includes power supply unit (12 V DC)
|
Price History: SOMA Cosmos
484.10 £ |
|
|
- XLR microphone input with 24 V phantom power (can not be switched off)
- Recessed gain control (prevents accidental adjustment)
- Balanced XLR output
- USB port (connects to VoiceSupport application for tips, tricks and updates)
- Mic-control connector (effect on/off via TC-Helicon MP-75 microphone)
- All pedals of the Voice Tone series can be connected together (Daisychain), with the first pedal taking over the master volume
- Includes power supply
|
Price History: TC-Helicon VoiceTone X1
89.71 £ |
|
|
Vocal Effects Unit
- AIRA Compact Voice Tweaker
- Direct access to pitch and formant via fader
- Switchable effects: Auto Pitch, Harmony and Vocoder
- Adjustable scatter effect for rhythmic modulations
- Adjustable master effect (reverb, echo, tempo delay and chorus)
- Looper with 24 seconds recording time, unlimited overdubbing, undo/redo function and automatic BPM detection
- Pitch, harmony and vocoder parameters controllable via MIDI
- High-pass filter and noise gate to suppress background noise
- Microphone input with gain control: 6.3 mm jack
- Mix input: 3.5 mm TRS jack
- Line/headset output: 3.5 mm TRRS jack, CTIA
- Sync in/out: 3.5 mm jack
- MIDI in/out: 3.5 mm TRS jack, type A
- USB-C port for USB audio/MIDI and power supply
- Built-in lithium-ion battery for up to 3.5 hours of operation
- Dimensions (W x D x H): 188 x 106.5 x 41.7 mm
- Weight: 290 g
- Incl. USB cable
|
Price History: Roland AIRA Compact E-4 Voice Tweaker
134.16 £ |
|
|
Microphone Looper Pedal
- Audio resolution: 24-Bit uncompressed
- 5 Minutes of loop time
- Unlimited overdubs
- Undo/Redo function
- Automatic adjustment of the input level
- Immediate stop with a foot switch
- Selectable overdubbing modes
- Delete without noise
- Balanced XLR inputs and outputs
- Can easily be switched between mic and PA
- Last loop will be saved with all overdubs and is maintained after switching off
- Integrated mic preamps with phantom power (32 V - permanently active) for dynamic and condenser microphones
- Incl. 12 V power supply
|
Price History: TC-Helicon Ditto Mic Looper
104.26 £ |
|
|
Multi-Effect Pedal for Microphones
- XLR microphone preamplifier for dynamic microphones with gain and pad switch
- 2 Foot-switchable multi-effects units
- Unit 1: 2 reverbs, short delay, phaser, lower and upper octaves
- Unit 2: 2 additional reverbs, long delay, flanger & rotary, FX loop
- Low pass filter
- Switchable saturation range
- True bypass
- 2 Expression pedal inputs
- Controls: 2x CTR1, 2x CTR2, Blend, 2x Mix, Volume, Tone, 2x FX Select, Mic Level
- Switch: Output Select, Pad
- LED: Effect A on, Effect B on, Saturation on
- Foot switch: Effect A Bypass, Effect B Bypass, Saturation Bypass
- Current consumption: 210 mA
- Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
- Dimensions (W x D x H): 113 x 142 x 59 mm
- Weight: 490 g
- Handmade in USA
Note: Battery operation is not supported. Connections: - Input: Comboi socket 6.3 mm jack / XLR
- Outputs: XLR and 6.3 mm jack
- EXP A: 6.3 mm jack
- EXP B: 6.3 mm jack
- Send: 6.3 mm jack
- Return: 6.3 mm jack
- Expression A input: 6.3 mm stereo jack
- Expression B input: 6.3 mm stereo jack
- Power connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
|
Price History: Old Blood Noise Endeavors MAW XLR Pedal
251.34 £ |