ADDAC

• Stereo FM radio (86-106 MHz)
• Controls for tune and volume
• CV inputs for tune and volume with attenuators (switchable from unipolar to bipolar)
• Station search and direct station selection, each with trigger input
• Mute switch with gate input
• Stereo output
• Power requirement: 100 mA (+12 V) / 100 mA (-12 V)
• Width: 8 HP
• Depth: 50mm

• 8 Illuminated switches for manual generation of a fixed voltage (+5 V)
• 4 of the 8 channels have signal inputs and can be used as latching switches
• Current consumption: 10 mA (+12 V) / 10 mA (-12 V)
• Width: 8 HP
• Depth: 25 mm

ADDAC 809 Chain Router; Eurorack module; CV controllable signal router; two signal-loops (A&B), each with input and output; 6 different routings selectable via buttons, gate inputs and Scroll CV input: Bypass, Loop A, Loop B, Loop A into Loop B, Loop B into Loop A, Loop A/B parallel; power consumption: 80mA (+12V) / 30mA (-12V); width: 6 HP; depth: 55mm

• Generates a gate signal and an AD envelope from the user's heartbeat
• Controls for attack, decay, amplitude and offset
• Positive and inverted envelope output
• Trigger output, sensor input
• Current requirement: 60 mA (+12 V) / 10 mA (-12 V)
• Width: 4 HP
• Depth: 35 mm
• Includes clip sensor for attachment to finger or earlobe

ADDAC 711 Balanced Inputs; Eurorack module; dual-channel DI-module with input transformers; suitable for adapting external signals to Eurorack level without ground loops; per channel: gain control knob, clip LED and 3-way ground-lift switch (Lift, Float, Ground); XLR/TRS combo input-jack and 3.5mm output jack on each channel; power consumption: 40mA (+12V / 40mA (-12V); width: 6 HP; depth: 40mm

• Precise two-channel sample&hold
• Each channel with adjustable slew limiter, signal and trigger input and output
• Each channel switchable from Sample&Hold to Track&Hold
• Alternative triggering of channel A and B switchable
• Additional outputs: Noise, Difference, Average and Sum
• Current consumption: 50 mA (+12 V) / 50 mA (-12 V)
• Width: 6 HP
• Depth: 40 mm

• Contains 3 channels, each with bipolar attenuator, input, and output
• Input from channel 1 is normalised to inputs 2 and 3
• Current draw: 40 mA (+12 V) / 40 mA (-12 V)
• Width: 4 HP
• Depth: 25 mm

• Converts the signal of an external light sensor (LDR) into control voltage
• Sensitivity and gain control for adaptation to the LDR signal
• Selector switch for 3 response times
• Positive and inverted CV output
• Each with offset control
• LDR connection via normal 3.5 mm mono patch cable
• Light sensor included
• Current consumption: 50 mA (+12 V) / 50 mA (-12 V)
• Width: 4 HP
• Depth: 45 mm

• Analogue oscillator based on CEM3340
• Frequency/tuning control (control range: 6 octaves)
• Fine-Tune control (control range: 12 semitones)
• Octave selector switch
• Selector switch for LFO or VCO operation
• Adjustable pulse width
• Mix section for mixing all available waveforms
• PWM CV input with attenuator
• Linear FM input with attenuator
• Sync input (switchable between hard and soft sync)
• 1 V/Oct CV input
• Outputs for mix, sine, triangle, sawtooth and pulse wave
• Current consumption: 60 mA (+12 V) / 60 mA (-12 V)
• Width: 8 HP
• Depth: 35 mm

• Analogue 8-band filter bank
• Per frequency band: volume control, mute switch, VCA CV input, envelope follower CV output and audio output
• Two audio inputs (input 1 with attenuator)
• Outputs for odd and even frequency bands, wet and mix signal
• Current consumption: 340 mA (+12 V) / 350 mA (-12 V)
• Width: 20 HP
• Depth: 55 mm

• Aluminium case and wooden sides with wenge veneer
• Carrying handle
• Integrated table stand
• Consists of 2 frames with 2 rows each (2x 6 U)
• Width: 85 U per row (340 U in total)
• Available installation depth for modules: 6 cm
• 4 Bus boards with 14 slots each for modules
• Built-in power supply unit
• Maximum current output per frame: +12 V / 1500 mA, -12 V / 1500 mA
• Dimensions closed (W x H x D): 450 x 270 x 225 mm
• Weight: 4.5 kg

• Contains 3 separate bandpass filters with identical features
• Adjustable input level with switchable gain (x 3 or x 100)
• Adjustable frequency and bandwidth (each with a CV input and an attenuator)
• Slope switchable between 6 dB / 12 dB
• Feedback control
• Adjustable output level with a phase switch, a CV input and an attenuator
• Dry level control (with a CV input and an attenuator)
• Individual input and output per filter as well as two mix outputs
• Current consumption: 250 mA (+12 V) / 250 mA (-12 V)
• Width: 22 HP
• Depth: 35 mm

• Complex CV / gate generator with controllable probability
• 4 CV outputs, 5 gate / trigger outputs
• Adjustable probability for outputs 1-4
• CV inputs for channels 1-3
• Logic outputs 1-4 can output gates or triggers
• CV outputs 1-4 are individually tunable
• Switchable quantiser are available
• Adjustable swing intensity with a CV input
• A lock mode that captures the previous gate / trigger sequence for repetition (max. 16 steps, running direction: forward, backward, pendulum)
• The lock mode can be activated via gate input
• Additional CV / gate output for swing clock or a fixed voltage between 0V and 4V
• Current consumption: 100mA (+12V) / 40mA (-12V)
• Width: 10 TE
• Depth: 40 mm

• Simulates the behaviour of a marble on a plate to generate control voltages
• The virtual marble can be influenced via 5 parameters: Movement on X- and Y-axis, rolling speed, rebound behaviour at the virtual surface boundaries (elasticity), bumping of the marble with adjustable intensity
• CV inputs for all parameters
• CV outputs for X, Y, velocity and bounce
• Current consumption: 80 mA (+12 V) / 40 mA (-12 V)
• Width: 10 HP
• Depth: 52 mm

• Analogue two-channel multimode filter
• Switchable stereo mode
• Per channel: Controls for cutoff and resonance, cutoff CV input with attenuator, audio input and outputs for highpass, bandpass and lowpass
• Current consumption: 70 mA (+12 V) / 70 mA (-12 V)
• Width: 6 HP
• Depth: 40 mm

• 5-Channel mixer and VCA
• Per channel gain control, VCA with linear or logarithmic characteristic and switch for Solo/Off/Mix
• Master channel with VCA
• CV input per channel
• VCA input and VCA output
• Link input
• Separate outputs before and after the master VCA
• Solo bus output
• Current consumption: 190 mA (+12 V) / 150 mA (-12 V)
• Width: 12 HP
• Depth: 55 mm

• 4-Channel noise source with T-network filter and decay envelope
• Suitable for creating percussion sounds
• Filter frequency and decay time adjustable per channel
• Switchable high-pass filter for channels 1-3
• Channel 4 with frequency selector: low / mid / high
• 3 VCA modes selectable per channel: trigger, mute, envelope
• Single output per voice
• Sum output with volume control and clean/drirt switch
• Current consumption: 40 mA (+12 V) / 40 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm

• Voltage controlled signal router
• 2 Channels with 2 inputs each and crossfader
• Stereo master VCA with crossfader and 2 direct inputs
• All three crossfaders with CV input and bipolar attenuator
• Mono master output for use as a 6-channel mixer
• Suitable for audio and CV signals
• Power requirement: 40 mA (+12 V) / 40 mA (-12 V)
• Width: 8 HP
• Depth: 45mm