AMS

• With digital out, stereo
• Based on the well-known Class A amplifiers
• Legendary Neve sound
• trafosym i/os
• With ADC up to 192 kHz and DSD
• Analogue insert point ahead of AD converter
• Size: 19" / 1 RU

• The 500 series API format
• Based on the known 88RS module
• Legendary Neve sound
• Switchable phantom power (+48 volts)
• Gain control (+20 to +70 dB for microphones, -20 to +20 for line, 0 to +50 for DI)
• High-pass filter (31.5 / 50 / 80 / 150 / 240 / 315 Hz)
• Pad (-20 dB) and phase reverse

• Channel Strip for the legendary 88RS
• Hi and low pass filter
• Four band EQ
• Compressor
• Gate and insert send return
• Filter and/or EQ section switchable with Dynamic Side Chain
• USB port for PC or Mac for total recall

• Based on the Classic 2254 series of the late 60s
• For music recording, mastering and post-production
• Neve 2254 discrete Class A circuit design
• Transformer-coupled circuitry on input, bridge driver, sidechain and output
• Fast Attack Time and Level controls
• Independent limiter and compressor in/out
• Ratio adjustable from 1.5:1 to 6:1
• Gain make-up control
• Hardbypass switch
• Link option
• USB type-B for use with a PC / Mac and the Total Recall software
• VU meter switchable between gain reduction, in- and output signal
• Input: 1x XLR (line, balanced)
• Output: 1x XLR (balanced)
• Frequency range: 20 - 20,000 Hz
• External power supply: 500 mA, 36 V DC
• Dimensions: 19" / 1 U
• Handmade in UK

• 5 Switchable EQ bands
• Selectable HP and LP filters (18dB per octave)
• Separate 48V phantom powering
• Phase flip: 180°
• Solo button selects channel unbalanced output
• Microphone input: input impedance 300 or 1200 Ohms, gain +20dB to +80dB in 5dB steps
• Line input: input impedance 10 kOhm, gain -15dB to +20dB in 5dB steps
• Frequency response: 20Hz to 20kHz, -3dB @ 7Hz and 35kHz
• Dimensions: 278 x 274 x 45 mm
• Weight: 2.9 kg

Note: requires an optional AMS Neve 1081 3U Horizontal Rack (article no. 539570, not included in the delivery)

• In the 500 Series API format
• Discreet Class A / B design
• Transmitter in the entrance
• Driver stages
• Sidechain and exit
• Independent limiter and compressor in / out
• Hard bypass switch
• Slow Attack with classic 2264A setting or new Slow Attack for bus compression
• LED Meter for Gain Reduction
• I / O points for insert operation with 1073LB
• Shielded housing for maximum Shielding against electromagnetic influences

• Circuit design of the legendary 1081 preamps
• 9.5" Housing
• Two devices can be connected to an 8-channel unit in 19" housing
• Remote control via Mac / Intel computer and Neve remote control software
• Selectable XLR microphone or electronically balanced line input
• Switchable 48V phantom power per channel
• Digital I/O options: Firewire / AES interface with 4-channel A/D or D/A conversion
• Analog insert per channel

• 10 Input / 10 output channels
• 2 Mic/line/instrument preamps based on the 88RS console
• Marinair transformer
• Up to 24 bit / 192 kHz
• 1x ADAT I/O
• Stereo headphone output
• Balanced inserts for channel 1 and 2
• Outputs: 2x 6.3 jack balanced
• Bus powered
• Dimensions (W x D x H): 182 x 203 x 76 mm
• Weight: 1.68 kg

• Usable as a standalone or rack mount for Neve racks/ series 80
• Class A Design microphone preamp
• 3-Band EQ (fixed HF plus two switchable filters with cut/ boost) and high pass filter
• Mic and line input
• Including power adapter

• The 500 series API format
• Based on the well-known Classic 1073
• Legendary Class A design Neve sound
• Gain with LED signal
• + 5/-20 dB level control with integrated phantom power switch, phase and impedance switch
• XLR /jack combo connector
• Microphone gain from -80 dB to -20 dB
• Line gain -20 dB to +10 dB in 5 dB steps
• Frequency range: ±0.5 dB 20 Hz to 20 kHz, -3 dB to 40 kHz, trafosym i/os

• 8 Combo socket Microphone / Line / Instrument inputs on the front
• Separate Sub-D25 line and mic inputs on the back
• 8 Line outputs Sub-D25
• Remote control software for easy access to all parameters and recall functionality
• Per channel: 48 V phantom power, 25 dB pad, switchable input impedance (300/1300 ohms), 80 Hz low cut
• Phase inversion
• Separate stereo monitor path with independent level control
• imensions: 19"/ 2U

• Access to the basic reverb parameters of each programme (pre-delay, decay time and decay filter)
• Input, output, and mix (wet/dry) levels can be set globally
• 18 Different reverb programmes
• 100 user presets
• 2.4" OLED display
• Design: API Series 500 format (3 slots)

• An optional digital interface with 8 channels A/D conversion for each preamp output and two channels D/A conversion for the digital monitor return signal
• Word Clock In/Out
• A digital headroom selector switch for switching the DMON input and digital preamp outputs 1 to 8 from +18 dBu, +24 dBu or +26 dBu
• It can be used as a primary/core audio interface via the USB-B connection
• The primary and secondary Dante connectors allow the 1073 OPX to be connected to any Dante audio-over-IP network as a Dante-enabled preamplifier

• Mono
• Transformer-balanced inputs and outputs
• Based on the well-known Class A amplifier
• Legendary Neve sound
• Build: 1 U / 19"

• 16 Channels with additional Aux inputs Cue
• Level, Pan, Solo, and Mute switches
• Settings are available on PC or Mac via USB
• Typical Neve amplifier circuit
• Different insert switching possibilities
• Fixed insert point in the sum
• Special centre and side signal - Insert Send Return
• Solo In Place Function
• Exclusive stereo track control (stereo width)
• Separate monitor and cue controls
• Connections: Main and old speaker outs, talkback mic and headphone output
• Optional digital output card (Art.113677)
• Size: 2U rack with specially shielded power supply, trafosym. outputs

• Analogue microphone preamplifier
• Stereo
• Based on the well-known Class A preamp design with 3 band EQ: +/- 16 db
• High shelving 12 Khz, +/- 18 db mid with 6 switchable frequencies and fixed Q, +/- 16 db low shelving with 4 corner frequencies
• Exclusive Neve Marinair transformer for input/output
• Switchable insert path
• Design: 19"/ 2 U

• Based on the well-known Class A amplifier
• Legendary Neve sound
• trafosym i/os
• Size: 19" / 1 RU

• For the stereo sum of the 8816 summing mixer
• Sample rate up to 192 kHz and DSD

• Filters based on the design of the 8801 and 88RS analogue consoles
• +/- 20 dB input trim
• High pass filter 25 Hz to 300 Hz 12 dB per octave
• Low pass filter 3 kHz to 15 kHz 12 dB per octave
• EQ High 1.5k to 18kHz
• Switchable shelving / Bell and Hi Q
• EQ Mid High 0.8 kHz to 9 kHz
• Q range: 0.3 to 7 freely adjustable
• EQ Mid Low 120 Hz to 2 kHz
• Q range: 0.3 to 7 freely adjustable
• EQ Low 33 Hz to 440Hz
• Switchable shelving / Bell and Hi Q
• EQ bypass
• USB port Mac or PC
• Connections: XLR / KLinke input +4 dBu, -10 dBV, XLR and parallel outputs
• Ext. Power supply 100V-250V

• Comprehensive limiting and compression facilities for music recording, mastering, post-production and broadcast applications
• Hand-wired Neve transformers
• Classic 2254 feedback compression
• Brick wall limiting
• Ratio adjustable from 1.5: 1 to 6: 1
• Gain make-up control in front of the limiter
• Independent sidechains for the compressor and limiter sections
• Dimensions (W x H x D): 480 x 88 x 255 mm
• Weight: 5 kg