Befaco

Befaco Pony VCO; Eurorack module; compact analog Thru-Zero VCO with build-in Wavefolder and VCA; manual control for VCO frequency with range switch (Full, Octave, Semitone, LFO); octave selector; Timbre control for wavefolder intensity; four selectable waveforms: sine, triangle, sawtooth and square wave; CV inputs for pitch (1V/oct.), FM, Timbre and VCA; Sync input; VCO output; power consumption: 32mA (+12V) / 25mA (-12V); width: 4 HP; depth: 30mm

• Analogue mixer for audio and CV signals
• 4 Inputs with level control
• Normal mix output and inverted output
• Peak LED
• Power requirements: +14 mA (+12 V) / -11 mA (-12 V)
• Width: 5 HP
• Depth: 50 mm

• Analogue voltage controlled oscillator
• Cleanly tuneable over a range of 10 octaves
• Rotary switch for octave selection and controls for tune and PWM
• CV inputs for pitch, FM, sync and PWM
• Waveform outputs: Sine, Triangle, Pulse, Sawtooth and Even (emphasis on even overtones)
• Power requirement: 36 mA (+12 V) / 26 mA (-12 V)
• Width: 8 HP
• Depth: 45 mm

• Eurorack module
• Audio Interface
• 2x 6.3 mm Jack output - TRS balanced
• 6.3 mm Stereo jack headphone output with separate volume control
• Cue input
• Current consumption: 24 mA (+12 V) / 26 mA (-12 V)
• Width: 4 TE
• Depth: 35 mm

• Input / output for X and Y axis with range and offset control
• Each axis can work as a bipolar attenuator or DC source
• 2 Gate outputs with trigger button
• Power requirement: 25 mA (+12 V) / 10 mA (-12 V)
• Width: 12 HP
• Depth: 35 mm

• Programmable multifunctional module
• Based on the OWL platform from Rebel Technology
• Pre-installed patches: Silky Reverb, Harmonic Oscillator, Tap Tempo Delay, MIDI to CV interface
• 4 assignable control knobs and 2 buttons for patch parameters
• 4 CV inputs with attenuator
• USB host and USB device ports
• 2 audio inputs
• 2 gate inputs
• 2 CV outputs and gate output
• 2 audio outputs
• Power supply: 140 mA (+12 V) / 15 mA (-12 V)
• Width: 12 TE
• Depth: 25 mm

• Analogue envelope generator
• Fader for attack, decay, sustain and release
• CV input to control each envelope stage
• Gate output for each envelope stage
• Characteristic can be adjusted from logarithmic to linear to expotentional
• Trigger/gate mode switchable
• Trigger input and button
• Current consumption: 55 mA (+12 V) / 25 mA (-12 V)
• Width: 8 HP
• Depth: 30 mm

• Spring reverb module
• Wet/Dry control (CV controllable)
• Adjustable high-pass filter
• 2 Inputs (each CV-controllable)
• Wet and mix output
• Delivery includes spring reverb tank (type 8BB2A1B) and RCA cable
• Current consumption: 51 mA (+12 V) / 34 mA (-12 V)
• Width: 8 HP
• Depth: 45 mm

• Multifunctional module for processing CV and audio signals
• Can be used as VCO, trigger generator, complex sample & hold stage, waveshaper, down-sampler, 8-step sequencer and more
• Internal VCO with rate and fine controls
• 8 Switches for each step of the internal step sequencer (on / off / reset)
• Switch for selection of internal or external clock
• Connectors: Signal In, Clock In, Pitch CV In, Hold In, Clock Out, Trigger Out, Signal Out.
• Current consumption: 48 mA (+12 V) / 18 mA (-12 V)
• Width: 8 TE
• Depth: 47 mm

• Dual four-quadrant multiplier
• Use as 4-channel mixer, ring modulator, voltage-controlled polariser, VCA, offset generator or adjustable voltage source
• Power requirements: +40 mA (+12 V) / -40 mA (-12 V)
• Width: 6 HP
• Depth: 30 mm

• Expander module for Befaco Muxlicer (Art.466975)
• Expands Muxlicer by an additional track with 8 gate steps
• Three modes per step selectable: No Gates, All Gates (signal of the Muxlicer gate output) and Pass In (looping of the signal at the gate input).
• Several MEX can be connected to one Muxlicer
• Power requirement: 20 mA (+12 V)
• Power supply via muxlicer module
• Width: 4 HP
• Depth: 25 mm

• Dual function generator
• Numerous application possibilities such as AD envelope, ASR envelope, VCO, low-pass filter, LFO, slew limiter, comparator and more
• 2 Channels with fader for rise and fall, trigger button, adjustable characteristic curve and switchable one-shot or cycle mode
• Per channel gate outputs for end-of-cycle (EOC) and rise/fall time
• CV inputs for rise, fall and characteristic curve shape per channel
• Logic section with gate outputs for MIN, MAX and B>A
• Current consumption: 110 mA (+12 V) / 90 mA (-12 V)
• Width: 18 HP
• Depth: 30 mm

• Digital noise generator with 3 channels
• 40 Different algorithms, individually selectable for channel A and B
• Analogue OTA multimode filter (low-pass, band-pass, high-pass) per channel with cutoff control, resonance control and cutoff CV input with attenuator
• Two CV-controllable parameters per algorithm, each with attenuator
• CV input for algorithm selection per channel
• Additional outputs for white and granular noise
• Current consumption: 110 mA (+12 V) / 67 mA (-12 V)
• Width: 14 HP
• Depth: 25 mm

• Voltage controlled MIDI controller
• Converts the signal from 8 faders and 8 buttons into freely assignable MIDI controllers
• CV input per fader and gate input per button
• 2 Aux CV inputs
• Supported controllers: CC, Note, Program change, Clock, ST/SP, NRPN
• Allocations can be saved
• Class-Compliant USB-MIDI-Interface and 5-Pin DIN Output
• Current consumption: 64 mA (+12 V) / 12 mA (-12 V)
• Width: 20 TE
• Depth: 30 mm