Behringer

• With exchange capsule (1x cardioid and 1x omnidirectional)
• Gold-plated XLR connector
• Accessories: clamp, wind shield, case
• 48 V Phantom power required

• Analogue multimode filter (-12dB / Oct.)
• Controls for input level, filter frequency (coarse and fine tuning), resonance and notch frequency
• Two CV inputs with attenuators for filter frequency
• CV input with attenuator for resonance
• Switchable limiter mode for high resonance settings
• Signal outputs for low pass, band pass, high pass and notch
• Power requirements: 55mA (+ 12V) / 45mA (-12V)
• Width: 16 HP
• Depth: 43 mm

Bundle offer comprising

• Rack Mixer
• 12 Channels
• Midas Preamps
• Integrated Wi-Fi router
• Stereo WAV recording interface
• X32 Effects Rack
• Real Time Analyser for all channels
• 2 AUX connections
• MIDI In/Out
• Height: 2 RU
• Dimensions: 333 x 149 x 95 mm
• Weight: 2.4 kg
• Rack mounts included
• Suitable bag: Art.466438 (not included)

• Tutorial DVD
• Comprehensive video training for the Behringer X Air series (ESD)
• German interactive video tutorial for PC, Mac and Tablet
• 8 Hours total running time
• Overview and basics
• Possible connections and connection options
• Use of the X Air edit software
• Detailed look at the channel strips
• Use of the scribble strip
• Input section and levels of different signal sources
• Gate, EQ and compressor in practical use
• Functions in the main output section
• Mute and DCA groups
• Create monitor mixes with the bus sends
• Combine channels into a sub-group
• Using the internal effects
• Internal effects as insert FX in the channels
• Integrate external effects units
• Use presets and snapshots
• Saving and loading channel strip settings
• Management of snapshots
• Advanced options for loading snapshots
• Save and load effect settings
• Functions of the utility menu
• The In/Out menu and signal flow
• Extended options via the USB connection
• Routing between X Air mixer and computer
• Practical examples for different applications
• Combination with Waves Multirack
• The Auto-Mix function in action
• Control via iPad or Android tablet
• Includes more than 50 presets for EQ, compressor etc.
• System requirements: Win7 or higher, Mac OSX 10.6 or higher, 1.6 GHz CPU, 0.5 GB RAM, 1920 x 1080 monitor, sound card

• Power: 45 Watt
• 3-Channel PA / keyboard amp with FBQ feedback detection and multi-effects processor
• 10" Loudspeaker
• 1 XLR microphone input
• 1 FX Send connector per channel
• Integrated 5-band graphic EQ
• Internal 24-bit FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• FBQ Feedback Detection system
• CD input
• Headphone connection
• Line output
• Speaker stand flange mount
• Dimensions (WxDxH): 419 x 441 x 299 mm
• Weight: 14.6 kg
• Optional cover: Art.474280 and 522575 (available separately)

Bundle offer comprising

• 18-Channel Digital Mixer
• Remote controlled via built-in router with Wi-Fi, Ethernet and multi-channel USB audio interface
• 16 Mic/Line XLR/Combo jack inputs
• Inputs: 2 x Line - 6.3 mm jack
• Outputs: Main XLR
• 6 AUX / Monitor sends
• 4 Integrated effects processors
• 100 Band Analyser
• Stereo headphone output
• Ultranet monitor connection
• MIDI in-/output
• iOS, Android and other software apps available free of charge
• 3 U
• Installation depth: 114 mm
• Dimensions with rack ears and protection bumpers (W x H x D): 333 x 140 x 150 mm
• Dimensions without rack ears and protection bumpers (B x H x T): 311 x 132 x 150 mm
• Weight: 3.2 kg
• Includes a rackmount chassis
• Suitable cases: Article Nr 465628 and Article Nr 464046 (both are not included)
• Suitable gig bag: Article Nr 379654 (not included)

• Transport Bag
• Suitable for Behringer X Air XR18 Mixer, Behringer X Air XR16, Behringer X Air XR12, Behringer SD16, Behringer SD8, Mackie DL16S, Mackie MR18, Midas MR 18, Midas MR12
• 2 Strap carrying system
• Padded and removable shoulder strap
• Accessory compartment net on the inside
• Accessory compartment on the outside: 320 x 140 x 20 mm
• Internal dimensions of the bag: 350 x 150 x 160 mm
• Weight: 800 g

Behringer System 55; Eurorack Modular-System; contains the modules 914 Fixed Filter Bank, 923 Filters, 904A VC Low Pass Filter, 904B VC High Pass Filter, 992 Control Voltages, x5 902 VCA, x4 911 Envelope Generator, x2 921A Oscillator Driver, x6 921B Oscillator, 921 VC Oscillator, 950 Sequential Controller, CM1A MIDI-CV Interface, x3 CP3A-O OSC Controller, x3 CP3A-M Mixer, x2 995 Attenuators, 903A Random Signal Generator, CP35 Attenuators, 961 Interface, 962 Sequential Switch; x2 Eurorack Go case with power supply; x2 Eurorack Go Brackets to link two Eurorack Go cases; including blank panels BP28, BP56 (x2) and BP2 (x2); 144 HP of free expansion space for other modules

• 7 Equaliser bands
• Frequency range: 50 - 10000 Hz with 15 dB boost / cut per band
• Controls: 50 - 120 - 400 - 500 - 800 - 4,5k - 10k - Level
• LED: Effect On / Off
• Footswitch: Effect Bypass
• True bypass
• Connections: input (6.3 mm jack), output (6.3 mm jack), power supply connector (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: 30 mA
• Powered by a 9V battery or a 9V DC power supply
• Dimensions (W x D x H): 70 x 123 x 54 mm
• Weight: 330 g
• Suitable power adapter: Art.409939 (not included)

• 2-Channel envelope generator
• Per channel controls for delay, attack, initial decay, sustain level and final decay
• Manual gate button
• Switchable re-trigger mode
• Gate and trigger input for both envelopes
• Positive and inverted signal output per channel
• Current requirement: 40 mA (+12 V) / 20 mA (-12 V)
• Width: 16 HP
• Depth: 42 mm

• Separate volume control for each channel
• 1 Input with 6.3 mm stereo jack
• Input impedance 100 kOhm
• 4 outputs with 6.3 mm stereo jacks
• Output impedance 80 Ohm
• Dimensions (W x H x D): 103 x 47 x 57 mm
• 12 Volt power supply included

• Preamp modeling with 16 preamp presets for voices, acoustic and electric guitar, bass, keyboards, drums and other sound sources
• Limiter
• 20 dB pad
• Phase reverse switch
• 48V phantom power
• Gain and output volume controls
• USB audio interface
• Jacks and XLR jack
• Including power supply

Now you can use seven EQ tapes to refine your sound and remove feedback! This pedal is convincing with a frequency response of 100 Hz to 6.4 kHz and a generous 15 dB boost / cut. A status LED for effect activation and battery check is included. An electronic on / off switch ensures quiet switching. The power supply is via a 9-volt battery or a DC adapter (not included).

• Floor / foot pedal
• 7 EQ tapes to refine your sound and remove feedback
• Wide frequency response from 100 Hz to 6.4 kHz with generous 15 dB boost / cut
• Status LED for effect activation and battery check
• Operation via 9-volt battery or Behringer PSU-SB DC power adapter (not included)
• Electronic on / off switch for silent switching

• 2 Respectively: 3-Way stereo or 4-way mono
• 24 dB / octave Linkwitz-Riley filter
• Mono-Sub switchable
• LF / HF gain regular / mutable
• CD horn EQ switchable
• Vertex frequency tunable
• Factor switching (10x)
• Multi-band limiter switch / variable (threshold)
• Limit display each way
• LF Delay (max 2ms / 60cm)
• Phase reverse
• 25 Hz subsonic filter, sym
• XLR in / out with multiband limiters
• Dimensions: 19", 1U, 147 mm case depth
• Weight: 1.7 kg

• Analogue 6-stage phaser with controls for shift frequency, resonance and modulation intensity (via internal LFO or CV input)
• Delay section for flanger and chorus effects, with adjustable delay time, resonance and modulation intensity (via internal LFO or CV input)
• LFO with outputs for triangle and inverted triangle - frequency range 0.02 - 10 Hz
• Gate delay with adjustable trigger threshold, delay time (0.3 ms - 6 s) and gate time (0.3 ms - 6 s)
• Current consumption: 60 mA (+12 V) / 60 mA (-12 V)
• Width: 16 HP
• Depth: 44 mm

• 24-bit High-resolution stereo reverbs
• Including Spring, Plate, Reverb, Gate, Room and Modulate sounds
• Controller for Mode, Time, Tone and Level
• Powered by 9V battery or 9V / DC power supply (not included)

• 32 Channels
• 16 XLR Mic/Line inputs
• 8 Stereo FX returns
• 25 Buses
• 6 Matrix buses with insert
• 6 Mute groups
• 8 DCA groups
• 8 XLR outputs
• 6 AUX inputs via 6.3 mm jack (optional: 2 via RCA)
• 6 AUX outputs via 6.3 mm jack (optional: 2 via RCA)
• Adjustable headphone jack
• 32 x 32 USB audio interface
• Talkback microphone input (XLR)
• 4-Band fully parametric EQ on each channel
• Adjustable delays on all channels
• Virtual effects rack with 8 FX slots
• Built-in stereo USB recorder
• Remote control via Ethernet
• 5" TFT display
• Compatible with the Behringer P-16 personal monitoring system
• Format: 19" / 3U
• Dimensions: 132 x 483 x 287 mm
• Weight: 6.5 kg
• Optional expansion cards are available separately (not included, must be purchased separately)

• Remote controlled via built-in router with Wi-Fi and Ethernet
• 4 Integrated Effects processors
• 100 Band Analyzer
• Free iOS, Android and other software apps available
• Dimensions: 333x149x140 mm
• Weight 3.0 kg
• Includes: Rackmounts
• Suitable bags: Article Nr. 379654 and Article Nr. 466438 (both not included)

Connections:

• Mic/Line: 8x XLR/1/4" Combo jack inputs
• Line: 8x 1/4" (6.3 mm) jacks
• Main-Out XLR
• 4x AUX/Monitor Sends
• Stereo Headphone output
• MIDI In/Out

• Drivers: 1" compression driver, 8" bass driver
• Power rating: 320 W (peak)
• Impedance: 8 Ohm
• Frequency range: 20 to 20000 Hz
• Maximum level: 96 dB
• Coverage pattern (H x V): 70° x 50
• Connectors: 2x Speaker Twist Connectors 4-pole
• Wiring: Pins 1+ / 1- Input, Pins 2+ / 2- Link
• 35 mm speaker stand flange mount
• Dimensions (H x W x D): 395 x 254 x 211 mm
• Weight: 5.1 kg
• Colour: Black

• 1500 W
• 2-Way
• 15" / 1.75" Compression driver
• Frequency range: 60 Hz - 18 kHz
• 2-Band EQ
• XLR In/Out
• Class D power amplifier
• Dimensions: 732 x 470 x 424 mm
• Weight: 29.65 kg
• Optional suitable cover: Art.481862 (not included)