Behringer

• 12 Channels: 6 mono / 2 stereo or 4 mono / 4 stereo
• Power: 125W/8 Ohm
• Klark Teknik multi-effects processor with LCD Display
• Parameter setting and tap function
• FBQ Feedback detection system
• 6 Mic preamps with switchable 48V phantom power
• 3-Band EQ with low cut filter and clip LED for each mono channel
• Switchable pad
• Stereo 7-band EQ for master and monitor
• Adjustable AUX input
• Internal power adapter
• Weight: 6.3 kg
• Dimensions (H x W x D): 122 x 390 x 425 mm

• A new routing approach with an emphasis on sources instead of channels
• Fully compatible with Behringer X32 / Midas M32 consoles and stage boxes
• Vintage emulations of EQs, compressors and gates available in each of the 40 stereo inputs
• 40 Stereo inputs
• 8 Stereo AUX inputs
• 28 Buses: 16 stereo AUX, 8 stereo matrices, 4 stereo mains
• 24 Faders in 3 fully programmable sections
• 10'' Touch display with adjustable angle
• Programmable Custom Control section
• 8 Midas Pro microphone preamp
• 8 Analog Midas line outputs
• 8 AUX inputs
• 6 AUX outputs and 2 monitor outputs: 6.3 mm jack balanced mono
• 2 Headphone outputs
• 3 AES50 ports: 48 x 48 channels per port - cable length up to 80 metres
• MIDI input / output
• 2 Programmable GPIOs
• 48 x 48 Channel USB interface
• Expansion slot, including a WING-LIVE card
• 64 x 64 channel SD recorder / player
• Additional cards are optionally available (Dante, MADI, SoundGrid)
• StageCONNECT 32-channel port for personal monitoring
• 16 FX engines: 8 premium, 8 standard
• 6-Band EQ in the inputs
• 8-Band EQ in the outputs
• Dimensions (H x W x D): 201 x 870 x 575 mm
• Weight: 24 kg
• Suitable cover available under Article Nr 480990 (not included, must be ordered separately)
• Suitable case available under Article Nr 499924 (not included, must be ordered separately)
• Suitable Dante expansion card available under Article Nr 512976 (not included, must be ordered separately)

• Power: 600 W
• Equipped with: 15" turbosound speakers
• 1 XLR Microphone input
• 1 FX Send per channel
• Integrated 7-band graphic EQ
• KLARK TEKNIK FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi effects
• FBQ Feedback detection system
• Ground lift switch
• Balanced XLR DI stereo output
• Link output for true stereo operation
• AUX in
• Headphone connector
• Dimensions (W x D x H): 569 x 372 x 483 mm
• Weight: 22.4 kg

• Power: 4x 860 Watt at 4 Ohm, 4x 440 Watt at 8 Ohm
• Inputs: Jack and XLR
• Outputs: Speaker-twist
• Built-in crossover
• Integrated limiter
• Mains, signal and limit LEDs
• Dimensions: 19" / 2 HE
• Housing depth: 320 mm
• Weight: 6.1 kg

Bundle offer comprising

• E-Drum Set

Complete electronic drum set including:

• Sound module
• Bass kick pedal with kick pad
• Hi-hat controller
• 1x 8" Stereo snare pad
• 3x 8" Stereo tom pads
• 3x 12" E-cymbal pads
• U-Drum rack
• Multi-pin pad connection cable
• Drumsticks

Characteristics of the sound module:

• 175 Integrated sounds
• 15 Drum sets and USB interface
• 10 Preset and 5 programmable drum kits
• Integrated sequencer for exercise recordings

• Drum Throne
• Round seat
• Diameter: 28 cm
• Double-braced
• Continuously adjustable in height (without fixed increments)
• Min. height: 53 cm
• Max. height: 63 cm
• Colour: Black

• Headphones
• Circumaural
• Closed
• Rotatable earcups
• 57 mm driver
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 110 dB
• Impedance: 32 Ohm
• Max. input level: 100 mW
• 3 m cable with 3.5 mm jack plug and 6.3 mm adapter
• Weight without cable: 244 g

• Drumsticks
• Size 5A
• American Classic Series
• Hickory wood
• Wooden tips
• Teardrop tips
• Ideal for rock and as practice sticks
• Length: 406 mm
• Diameter: 14,4 mm

• 3 Separate attenuators
• Each with input and output
• Suitable for CV and audio signals
• Width: 8 HP

• Direct connection of instruments to amplifiers and mixers
• Allows long cable paths without loss of sound in the high frequency range
• Jack input
• Parallel output
• Balanced XLR output ground lift switch solves typical problems with ground loops
• Road-suitable metal housing

• With FBQ Feedback Detection System audio anayser
• Servo-balanced inputs and outputs with jack and XLR
• Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz
• Switchable Low-Cut
• 4-Digit LED display and input level control
• Illuminated faders
• Design: 19" / 1U

• Analogue envelope generator
• Controls for attack, decay, release time and sustain level
• Segment times adjustable from 2 ms - 10 s
• S-trigger input
• Width: 8 HP

Behringer HPM1100 monitoring headphones, wired, closed back, over ear, dynamic, frequency range: 20 Hz - 20.000 Hz, impedance: 32 ohms, sound pressure: 96 dB SPL, driver size: 40mm, cable length 2m, connection: 3,5mm TRS jack, adapter 3,5mm to 6,3mm included, color: black

• Powerful 300 W RMS, 2-way monitor system
• Class-D amplifier technology
• Adjustable feedback filter and integrated limiter
• Sound processor
• Extremely low-noise mic/line input with level control and clip LED
• 3-Band EQ
• 12" Driver for deep basses and high SPL
• 1" HF Driver for brilliant treble reproduction
• Proprietary horn design for ultra-wide sound dispersion
• Internal switched-mode power supply
• Integrated 35 mm stand/tripod flange mount
• Dimensions (H x W x D): 360 x 580 x 406 mm
• Weight: 15.7 kg
• Optional protective cover: Article Nr 291556 (not included)

Feedback Destroyer ProThe FBQ2496 is the fastest (> 0.2 sec.) And the only 96 kHz feedback suppressor on the market. With its ultra-fast and intelligent feedback detection algorithm, it is capable of automatically locating up to 20 feedback frequencies per channel and suppressing them with extremely narrow notch filters, while the useful signal is virtually unaffected.

The "Set-and-Forget" and panic buttons ensure a super-simple and instant feedback suppression. In Auto mode, the mix is ​​continuously monitored and filter settings adjusted automatically, while in manual mode, up to 40 fully parametric filters can be set, adjustable in frequency, bandwidth and boost / cut. An open MIDI architecture allows future software updates and flexible communication with digital equipment. With the different operating modes, you are able to react flexibly to different situations within the scope of the live application - but the FBQ2496 also offers a creative sound shaping tool in the studio.

• Fully parametric filters
• 2 Channel
• Up to 20 feedback frequencies per channel
• Ultra-fast feedback detection (> 0.2 sec)
• Auto / manual operation either
• 24-bit / 96 kHz A / D and D / A converter
• 32-bit DSP
• MIDI interface
• Up-date-able
• Sym. (!) in / out jack
• Power supply 100 V-240V
• 19 "rack format with 1U

• On/Off switch
• Directional characteristic: cardioid
• Mid-frequency presence boost for excellent voice projection
• Integrated wind and pop noise filter
• Shock mount system to reduce handling noise
• 3-Pin XLR connector
• Frequency range: 50 - 16,000Hz
• Impedance: 300 Ohm
• Sensitivity: -54 ± 2 dBV/Pa
• Max. SPL (sound pressure level): 150 dB
• Weight: 320 g
• Includes a microphone stand adapter and case
• Designed and engineered in Germany

• 3 Modes: Cable Tester, Installed Cable Tester and Test Sound Mode
• Equipped with inputs and outputs for XLR, SpeakerTwist, 6.3 mm and 3.5 mm stereo jack, RCA, RJ45, MIDI and USB
• LED display
• Continuity testing and intermittent contact detection
• Phantom power and ground test
• Test tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
• Operation with 2 batteries AA (not included)

• 2 Channels
• Power: 10 W
• Speaker configuration: 6" Custom Bugera Speaker
• Controls: Gain, Treble, Middle, Bass, Volume
• Switch: Channel select
• Input: 6.3 mm jack
• Line input: 3.5 mm jack
• Headphone output: 3.5 mm jack
• Dimensions (W x H x D): 298 x 289 x 169 mm
• Weight: 3.8 kg

• 1 Mic input with phantom power and peak LED
• 1 Stereo line input
• 2-Band EQ in both channels
• 2-Track in-/output
• Master fader
• 15 V phantom power
• USB interface
• Power supply via PC USB or power adapter (included)
• Dimensions: (H x W x D) 46 x 114 x 136 mm
• Weight: 0.38 kg
• Suitable bag: Article Nr. 481198 (not included)

Behringer 2600-VCO; Eurorack module; analog VCO; frequency range: 10Hz - 10kHz and 0.03Hz - 30Hz in LF Mode; adjustable pulsewidth; CV input with attenuator for pulsewidth modulation; 3 FM inputs, each with attenuator; Keboard CV input (1V/oct.); outputs for triangle, sawtooth, sine and pulse waveforms; power consumption: 140mA (+12V) / 5mA (-12V); width: 16 HP; depth: 42mm

• Equipped with: 15" + driver
• Power capacity: 150 W/600 W RMS/Peak
• With speaker flange
• 6.3 mm jack connector
• Frequency range: 50 Hz - 20 kHz
• Impedance: 8 Ohm
• Nominal dispersion: 80° x 40°
• Dimensions: 455 x 685 x 465 mm
• Weight: 21.9 kg
• Optional compatible protective case: article number 275180