Darkglass

Darkglass Microtubes Infinity; programmable pre-amp for electric bass; combines the three Darkglass distortors B3K, Vintage and X.; 6-band equalizer; controls: compression, drive, tone, blend, level; push buttons: three multifunction buttons; LED: effect on; footswitch: effect bypass; connections: Input (6.3 mm jack), Output (6.3 mm jack), XLR, Headphone output (3.5mm jack); Mains adapter connection: Barrel connector 5.5 x 2.1 mm, center negative; power supply with a 9 V DC mains adapter (not included in delivery); suitable optional power supply unit: Art. No. #409939; Dimensions (W x D x H): 18 x 12 x 6 mm; Note: Battery operation is not supported.

• A clean preamp that amplifies attack and presence while shaping the mid-range for a very percussive and aggressive character
• With a sound circuit that can be controlled with the character knob
• An active 3-band equalizer with semi-parametric midpoints
• Suitable as a supplement to distortion pedals as well as a stand-alone bass preamplifier
• Controls: Boost, Character, Mid Gain, Mid Freq, Bass, Treble
• LED: Effect On
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Power supply with a 9 V DC mains adapter (not included - suitable mains adapter: Article Nr. 409939)
• Dimensions (W x D x H): 64 x 111 x 43 mm
• Weight: 250 g
• Made in Finland

Note: Battery operation is not supported.

• Clean and easy to use amplifier
• New "Powered Platform" concept allows the amp to be used as a multi-effects unit - signal chains can be saved to presets from a constantly growing DSP database with compressors, distortions, modulations, preamps, impulse responses etc.
• 1 Channel
• Power: 500 watts
• Controls: Input, Bass, Low-Mids, High-Mids, High, Blend, Master
• Switches: Preset, Mute, Ground lift, On/Off
• Effect loop-in
• Dimensions (W x D x H): 210 x 175 x 6 mm
• Weight: 1.7 kg
• Made in Finland

Connections:

• Input: 6.3 mm jack
• MIDI In:
• DI Out: XLR
• FX send & return: 2x 6.3 mm jack
• Headphone output: 6.3 mm stereo jack
• USB-C connector
• Speaker outputs: 6.3 mm jack / Speaker Twist combo jacks

• Bass Distortion
• For aggressive full and fat sound
• With additional 4-band graphic EQ
• High pass control from 100 - 1000 Hz, High Drive, High Level, Low pass from 50 - 500 Hz, Low Comp, Low Level
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Parallel output: 6.3 mm Jack
• Direct output: XLR
• Connection for 9 V DC power supply with negative pole inside (not included)
• Dimensions: 120 x 94 x 46 mm
• Weight: 320 g

• Bass Overdrive
• New additional features to the first version: single user-loadable speaker simulation Impulse Response, Micro-USB B connector for connection to a PC/Mac, 3.5 mm headphone output with speaker simulation as well as balanced XLR output with switchable speaker simulation
• Controls: Drive, Level, Blend, Master, Treble, Hi Mids, Lo Mids, Bass
• Push buttons: Cab Sim, Ground Lift
• Switches: Attack, Grunt, Lo Mids (500 Hz/1 kHz/250 Hz), Hi Mids (1.5 kHz/3 kHz/750 Hz)
• LED: Effect On, Distortion
• Footswitch: Effect Bypass, Distortion
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Direct output: XLR
• Aux input: 3.5 mm jack
• Headphone output: 3.5 mm jack
• Power supply connection: Coaxial connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 110 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art.409939)
• True bypass
• Dimensions (W x D x H): 125 x 96 x 57 mm
• Weight: 430 g
• Made in Finland

Note: Battery operation is not supported.

• For Darkglass DG410N
• Robust and water resistant
• Padded

• Full sound with low weight due to neodymium magnets
• Equipped with: 4x 10" Custom eminence neodymium speaker and 1" P Audio HF driver tweeter with adjustable horn
• Closed speaker construction - front loaded
• Power rating: 1000 W
• Impedance: 4 Ohm
• Connections: 2 Combo jack speaker twist / 6.3 mm jack
• Housing material: Paulownia
• Baffle material: Baltic birch
• Dimensions (W x H x D): 610 x 643 x 430 mm
• Weight: 22.2 kg
• Colour: Carbon

• Provides the distortion and flexibility of the alpha-omega in a smaller format
• With the two distortions, it offers the same harmonically rich, various sounds as its big brother
• Knobs: Blend - mod - level - drive
• Buttons: Growl - bite
• LED: Effect on/ off
• Foot switch: Effect bypass
• True bypass
• Input and output: 6.3 mm Jack
• Power supply connection (coaxial socket 5.5 x 2.1 mm - negative pin inside)
• Power consumption: 20 mA
• Power supplied with 9 V DC power supply (not included - suitable power supply e.g. Art. 409939)
• Dimensions: (W x D x H) 75 x 111 x 45 mm
• Weight: 250 g
• Made in Finland

Note: No battery operation possible.

• 1 Channel
• Power: 900W
• Analogue preamplifier with switchable vintage microtubes and microtube B3K drive circuits
• Latency compensated post DI with digital speaker simulation
• Headphone output with speaker simulation
• Three impulse response slots, selectable via Cab select switch
• Adjustable VCA compression in studio quality
• Controls: Comp, Drive, Level, Tone, Blend, Gain, Master, 6-Band EQ, Headphone Volume
• Switch: Input Passive/Active, Microtubes, VMT/B3K Drive Circuit, Mute, Impedance 4/2 Ωs, Gnd. > Lift, Cab Select
• Input (6.3 mm jack)
• DI out (XLR)
• FX Send & Return (2x 6.3 mm jack)
• AUX In (3.5 mm stereo jack)
• Headphone output (6.3 mm stereo jack)
• Pre & Post DI Out (2 x XLR)
• MIDI in
• Footswitch input (6.3 mm jack)
• Micro USB
• Dimensions (W x D x H): 267 x 254 x 70 mm
• Weight: 2.9 kg
• Incl. Intelligent foot switch
• Made in Finland

• Compact, lightweight and comfortable bag for the Microtubes 900 Bass Amp Head
• Material: Nylon
• Water resistant
• Large & small outside pockets
• Adjustable backpack straps
• Sturdy handle
• Dimensions: 34 x 37 x 14 cm

• 3 Switchable compressor models
• Digital modeling of the side-chain circuits emulation 3 of the most legendary compressors
• Completely analog signal path
• Touch-through metal sensors for ratio and mode
• Controls: Blend, Time, Level, Compression, Ratio
• Switch: Mode
• LED: Effect On, Ratio, Gain Reduction
• Footswitch: Effect Bypass
• Connections: Input (6.3 mm jack), Output (6.3 mm jack), Power adapter connector (female connector 5.5 x 2.1 mm, negative pole inside)
• Power consumption: 250 mA
• Power supply via 9 V DC power adapter
• Dimensions (W x D x H): 42 x 111 x 64 mm
• Weight: 230 g
• Suitable power adapter: Article Nr. 409939 (not included)
• Made in Finland

Note: No battery operation possible!

• Fuzz
• Contains 2 fuzz circuits - a sawtooth wave and a hard high-gain sound that can be combined for a wide range of fuzz sounds
• Controls: Duality, Level
• Bypass footswitch
• Status LED
• True Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm (negative pole inside)
• Power supply via 9 V DC mains adapter (not included - suitable mains adapter: art. 409939)
• Power consumption: 40 mA
• Dimensions (W x D x H): 50 x 100 x 45 mm
• Weight: 340 g
• Made in Finland

Note: No battery operation possible.