Doepfer

• Especially for the connection of modulation wheels, pitch benders, joy sticks, foot controller, breath controller, sustain pedal, etc.
• With 230V power supply

Doepfer A-185-2 VE; Eurorack module; Precision CV Adder / Bus Access; 4 CV inputs (x1 with attenuator bipolar switch, x3 with bipolar switchr); power consumption: 10mA (+12V) / 10mA (-12V); width: 6 HP; depth: 50mm; black frontpanel

• 8x Interconnected jacks
• Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board)
• Width: 2HP

Doepfer A-151 VE; Eurorack module; Quad Sequential Switch; Vintage Edition with black front panel; electronic four-position rotary switch; selectable number of steps (2, 3 or 4 steps); four inputs/outputs and one common output/input; trigger and reset inputs; voltage range: -12V to +12V; power consumption: 20mA (+12V) / 10mA (-12V); width: 4 HP; depth: 35mm

• Voltage-controlled low-pass filter with an 18 dB / octave slope
• The circuit is based on a modified transistor ladder (Moog ladder), and corresponds to the low-pass filter of the TB303
• Width: 8 HP / 40.3 mm
• Depth: 55 mm (measured from the rear side of the front panel)
• Power requirement: +30 mA (+12 V) / -10 mA (-12 V)

• Octal Linear VCA
• 8 VCAs with linear characteristic for audio and control signals
• Sum outputs for VCA groups 1-4, 5-8 and 1-8
• Current: 50 mA (+12V) / 50 mA (-12V)
• Width: 6 HP
• Depth: 40 mm
• Black front panel

• Voltage Addressed Track & Hold / Switch (Multiplexer) / Digital Outputs
• Combined electronic 8-way rotary switch- with 8-fold track & hold module
• Input and output indicator via LED
• 8 Additional digital outputs available
• Eurorack format
• Width: 16 HP
• Depth: 45 mm
• Power requirements: +40 mA (+ 12V) / -20 mA (-12V)

• Module combination outputs the manually generated 1V / octave control voltage and up to 15 different gate and trigger signals
• "Send" module A-173-1 with 18 keys and octave switch
• "Receive" module A-173-2 with 15 gate / trigger outputs, 1V / octave compatible CV output and normal gate output
• Outputs individually switchable between gate or toggle mode
• Learn Function allows you to decouple individual keys from the CV path
• Width: 2 x 6 HP
• Depth: 45 mm
• Power requirement: +100 mA (+12 V) / -10 mA (-12 V)

• Allows delayed output of the input signal
• Power requirement: +40 mA (+ 12V) / -0 mA (-12V)
• Width: 8 HP / 40.3 mm
• Depth: 45 mm (measured from the back of the front panel)

Module A-117 (DNG) is a combination module, including a digital noise generator and an 808 source. The digital noise generator uses random sequences of square waves, (18-band, with multiple slewed feed-back loops), whose rate can go from random clicks to pure noise. The colour of the noise is very different from the analog noise produced by the A-118. In addition to a manual setting, the rate can be control-led by an external clock - eg. VCO, LFO or MIDI clock).

The 808 Source aims to re-create the sort of multi-oscillator array that was used in Roland’s TR-808 and 606 drum machines as the basis of the sound of the hi-hat, cymbals and cowbell. The cowbell mix uses two oscillators, and the cymbals mix six.

• Width: 8HP / 40.3 mm
• Depth: 40 mm (measured from the rear of the front plate)
• Power requirements: 20 mA (12V) / -10 mA (-12V)

• Vintage edition with black front plate
• 2 Switch rows with 8 steps each
• Euro rack format
• Width: 50 HP
• Depth: 40 mm
• Power consumption: +80 mA (+12V)/ -20 mA (-12V)

• Width: 4 HP / 20.0 mm
• Depth: 20 mm
• Power requirement: 20 mA

• Two rows with 84 HP each for installing modules
• 2x 3 H3
• Dimensions: approx. 465 x 330 x 170 mm
• Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise approx. 100 mm
• Colour: black
• Includes PSU3 power supply (+12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V), and 2x backplanes

• Contains two 6.3mm / 3.5mm multiples, each with a 6.3mm and 2 x 3.5mm jack jacks
• One multiple is mono (ie the two small jack sockets are connected to the tip of the 6.3 mm jack socket)
• The other is connected in stereo (ie one of the two small jacks is connected to the tip, the other to the ring of the 6.3 mm jack).

• Quad buffer
• Contains 4 separate control voltage buffers
• For use with the outputs of switches, quantizers, sequencers, S & H modules, and more
• Outputs are normalised to the next input
• Use as a buffered multiple possible
• Width: 4 HP

• Vintage Edition with a black front panel
• Dual ADSR
• Two identical analogue envelopes in one module
• Per envelope: CV input with attenuator to control any parameter (selectable via jumper)
• Gate input
• Retrigger input
• 2 x Output
• Voltage range: 0 to +10 V
• Attack, decay, release times: approx. 1 ms - 30 s
• Current consumption: 50 mA (+12 V) / 40 mA (-12 V)
• Width: 8 TE
• Depth: 40 mm

• Hammer action keyboard with 88 keys
• Graded hammer action keyboard (TP/40GH) with after touch
• Black front- and back-cover
• 2-Row LC-Display
• 16-Character LC-Display
• 24 Buttons
• 8 Menu buttons with LED-indicator
• 2 Wheels with assignable function
• 2 Sliders (60 mm) with assignable function
• 1 control knob
• 1 Rotary control knob
• 2 Midi-outputs
• 1 Midi-input
• Terminals for double foot-switch
• Connections for 2 foot-control-pedals
• USB port
• 8 Split zones
• Dimensions: approx. 155 x 26 x 10 cm
• Weight: approx. 24 kg
• Colour: Black
• Including power adapter

• Polyphonic filter module with 4 analogue 24dB low-pass filters
• Common controls for filter frequency; filter modulation; resonance and input level
• All parameters controllable via CV with own attenuators
• Per filter: audio input; FM input; audio output
• Current consumption: 70mA (+12V) / 70mA (-12V)
• Width: 8 HP
• Depth: 50 mm

• Compact 2-channel VCA
• Per channel control for basic gain and CV attenuator
• Mute function per channel and switchable characteristic between linear and expotential
• Current consumption: 30 mA (+12 V) / 30 mA (-12 V)
• Width: 4 HP
• Depth: 50 mm

• Synchronization of clock-controlled modules via MIDI and USB
• MIDI input
• USB input for MIDI via USB
• Clock outputs
• Wait button / control input
• LED indicators for Clock, "1" and Start
• Power requirement: +50 mA (+12 V) / -50 mA (-12 V)
• Width: 6 HP
• Depth: 50 mm