Doepfer

• Universal MIDI Out-retrofit
• PCB dimensions: 90 x 105 mm²
• Including power adapter

• Integrated power supply A-100SSB (+ 12V/380 mA, -12V/380mA)
• 48 HP version of the A-100LC3
• Built-in bus board with 8 module slots
• IEC socket on the back side
• Internal dimensions: 48 HP x 3 RU
• External dimensions (W x D x H): 262 x 158 x 154cm
• Colour: Black
• Including power cable

• Suitable for voltage-controlled cross-fading of audio as well as CV signals
• Width: 4 HP
• Depth: 45 mm
• Current consumption: +20 mA (+12 V) / -10 mA (-12 V)

• Two independent CV/ Gate-to-MIDI/ USB interfaces
• Each interface with 4 inputs (Gate, CVN, CVV, CVC)
• MIDI in/ out
• USB
• Euro rack format
• Width: 10 HP
• Depth: 55 mm
• Power consumption: +70 mA (+12V)/ -20 mA (-12V)

Doepfer A-149-4; Eurorack module; Quad Random Voltage Source; provides four triggered and quantized random voltages (range: 0V to +5V); adjustable octave range; selectable quantization grid: Octaves, Octaves + Quin, Chords, Scale, Semitones, continuous; minor or major key selectable; separate buttons for adding a Sixth or Seventh; 4 trigger inputs and 4 CV outputs; power consumption: 50mA (+12V) / 10mA (-12V); width: 4 HP; depth: 50mm

• A number with 84 HP for installation of modules
• Incl. external power supply (1200 mA) and bus board
• Dimensions (W x H x D): approx. 445 x 150 x 160 mm

• Red LEDs
• Analogue
• 2 Rows each with 8 potentiometers
• 1 Knob for each step, 1 LED
• Switch On/Off/Skip and switch Stop/Continue/Jump
• Modes of operation: 1x 16 (the two rows run in sequence, 2x 8 (rows run in parallel), and custom
• Different directions
• Three voltage/tone ranges selectable
• Quantisation
• Transposer
• Analogue interface for CV/Gate/Clock/Reset/Start-Stop In and Out (3.5mm jack sockets)
• Control either internally via integrated clock oscillator with frequency and pulse width control
• Externally via Midi/USB
• Externally (via Analogue Clock/Start/Stop) or rocker switch with 3 positions
• MIDI in/out
• USB connector
• Powered via power supply 12V AC / min. 400 mA

• Noise and random generator
• Output for white noise
• Output for coloured noise - proportions mixable
• Output for continuous random voltage with level control
• Track & Hold or Sample & Hold mode selectable
• Current requirement: 20 mA (+12 V) / 20 mA (-12 V)
• Width: 4 HP
• Depth: 40 mm

• Generates variable control voltage by bringing the hand closer to the antenna
• Distance range: approx. 30 cm
• Max. output voltage: +10V
• Eurorack format
• Current: +60 mA (+12 V) / -20 mA (-12 V)
• Width: 8 HP / 40.3 mm
• Depth: 40 mm, measured from the rear side of the front panel
• Black front panel

• Exponential VCA
• Primarily for controlling audio signals
• Width: 8 HP
• Depth: 45 mm
• Power requirements: +20 mA (+12 V) / -10 mA (-12 V)

Doepfer A-150-1 VE; Eurorack module; Dual Voltage Controlled Switch; can process voltages from -8V to +8V; power consumtion: 30mA (+12V) / 10mA (-12V); width: 4 HP; depth: 30mm; black front panel

• Octal Poly VCA
• 4-Channel VCA with 2 VCAs each
• Suitable for polyphonic applications
• VCA 1 with linear characteristic
• VCA 2 with linear or exponential characteristic
• Processes audio and CV signals
• Voltage range: 0 to +10 V
• Gain control for both VCA groups
• CV Inputs for VCA pairs 1L-4L and 1X-4X
• 4x Input / output
• Total output
• Power requirement: 40 mA (+12 V) / 40 mA (-12 V)
• Width: 8 TE
• Depth: 45 mm

• Vintage Edition with black front panel
• Analogue frequency shifter for audio signals
• Coarse and fine controls for frequency shift, range approx. 20 - 5000 Hz
• Mix control for mixing down-shift and up-shift signal
• Adjustable squelch function with integrated VCA and envelope follower
• Level control with overload LED
• Internal quadrature oscillator with sine and cosine outputs
• Sine and cosine inputs for external VCO
• CV input with attenuator for frequency and mix
• CV control input for VCA
• Audio input and output
• Expandable with optional A-126-2 expander module
• Current consumption: 80mA (+12V) / 70mA (-12V)
• Width: 8 HP
• Depth: 60 mm

• Black floor housing
• Connection cable app. 1m
• Stereo jack plug 6.35 mm
• Potentiometer 10k linear
• Suitable for e.g. LMK4+/2+ or A-177

Module A-114 contains two separate ring modulators. A ring modulator supplies the product, or multiplication ( X

• Width: 4TE / 20.0 mm
• Depth: 40 mm (measured from the back of the front panel)
• Power requirements: 40mA (12V) / -30mA (-12V)

• Dual VC Polariser
• channel polariser
• VCA
• Inverter
• Ring modulator
• Per channel: manual control (gain range -1 to +1), CV attenuator, CV input, CV modulation input, signal input and output
• Power requirement: 20 mA (+12 V) / 20 mA (-12 V)
• Width: 4 HP
• Depth: 40mm

The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect.

• Spring system with 3 separate springs
• Reverb signal can be on the input
• Width: 8 TE / HP
• Depth: 50 mm
• Power requirement: +80 mA (+12V) / -10 mA (-12 V)

• 100 - 240 V
• Max. current output: 4x A-100PSU3, - +12 V / 8000 mA, -12 V / 4800 mA, +5 V / 16000 mA
• External dimensions when closed with lid (W x H x D): approx. 90 x 62 x 23 cm (18 cm without lid)
• Weight of frame incl. cover, 8 back boards and 4 power supply units (without modules): approx. 20 kg

• Consisting of: A-157-1 Trigger Matrix (8x16) + A-157-2 Output Module and A-157-3 Input Module
• Generates up to 8 trigger signals via 8 x 16 LED/switch trigger matrix
• 8 Tracks with each 16 steps
• Width: A-157-1: 44 HP (223.5 mm), A-157-2: 4 HP (20.0 mm)/A 157-3 mm: 4 HP (20, 0 mm)

• Multiplication factor can be controlled by control voltage or a regulator
• Black front panel
• Width: 4 HP
• Depth: 35 mm
• Power requirements: +50 mA (+12 V) / -0 mA (-12 V)