Electro Harmonix

• Overdrive/Distortion
• Control for: Volume, gain and tone
• True Bypass
• Dimensions (WxDxH): 70 x 115 x 57 mm
• Power supply with 9 V battery or 9 V DC power supply (coaxial connector - negative terminal inside - not included, e.g. Article Nr 409939)

The classic chorus effect from Electro Harmonix has experienced a real renaissance in the 90's, after Kurt Cobain used it with his legendary band Nirvana. As it is adjustable in rate and depth, the Small Clone delivers a warm, analog vintage-chorus-sound, that you can only dream with digital effects.

• Analog chorus
• The legendary Kurt Cobain sound
• True bypass
• Rate and depth adjustable
• Dimensions (WxDxH): 114 x 200 x 110 mm
• Power supply with a 9 V battery or 9 V DC power supply (coaxial connection - negative pin inside - not included, e.g. Article Nr: 409939)

• Compact design
• Extensive functionality
• Intuitive interface
• Records high-quality, non-compressed audio data directly onto a SDHC-card (4 to 32 GB, 8 GB card for up to 12 hours of recording time is included)
• Each card can store up to 100 individual loops
• Dual stereo loops with independent or fixed loop lengths
• Sequential loop mode allows switching between verse/chorus
• Parallel looping mode allows simultaneous playback of two loops
• 16 Built-in drum loops
• Microphone input with phantom power
• Reverse and Octave functions
• Undo or redo your last overdub or recording
• Quantize or Non-Quantize (free running) modes
• The USB port enables backup/restore of data on Mac or PC
• Programmable third foot switch for stop or tap tempo
• Power supply 9.6 V DC 500 mA (power supply unit is included)
• Dimensions (W x L x H): 146 x 121 x 64 mm
• Additional loop up/down foot controller available (not included, article nr 369322)

• 8 FX loops (6 mono and 2 stereo)
• 128 Presets
• Tap foot-switch adjusts the BPM
• Can be configured to send/receive MIDI clock and send tap signals to output
• BPM can be global or per preset
• The tuner footswitch sends the input signal to the tuner and mutes the signal
• Foot-switchable gain boost on both channels
• Controls: Boost Level and Value
• LED: L1-8, PC, CC, 1-8, Tap, Boost, CTRL 1 and 2
• Display: Bank number
• Foot-switch: L1-8, PC, CC, 1-8, Bank Up / Down, Preset
• Tap, Tuner, Boost, CTRL 1 and 2
• Current consumption: 150 mA
• Power supply with a 9 V DC power supply unit (included in delivery)
• True Bypass
• Dimensions: (W x D x H) 483 x 152 x 64 mm

Connections:

• Input: 6.3 mm Jack
• Stereo output: 2x 6.3 mm Jack
• 8x Loop Mono Send: 6.3 mm jack
• Loop 8 stereo / right send: 6.3 mm Jack
• Loop 7 and 8 stereo / right return: 6.3 mm Jack
• Loop Insert (Between Loop 5 & 6 - 2 x 6.3 mm jack)
• Tuner output: 6.3 mm Jack
• Power supply connection: Coaxial socket 5.5 x 2.1 mm, minus pole inside
• MIDI input and output

Note: No battery operation possible

• NANO Series
• Analogue Delay
• Control for Delay - Blend - Feedback
• Max. delay time: 550 ms
• Mini switch for MOD on/off
• Jack input and output
• Dimensions (WxDxHxD): 65 x 110 x 57 mm
• Power supply with a 9 V battery or a 9 V DC power supply unit - coaxial connection - negative pole inside (not included) e.g.: Article number 409939

• Bass Preamp / DI
• Compact, flexible DI pedal with switchable distortion, which offers powerful sound shaping possibilities for bass
• XLR DI Out
• Also suitable for headphones, a 6.3 mm output jack plus a hard-wired 6.3 mm dry output jack
• Controls: Gate, Vol, Bass, Lo Mid, Hi Mid, Treble, Compression, Level, Blend, Drive, Tone, DI Volume
• Switch: Distortion Position, Ground Lift, Bypass, 10 dB Pad
• Footswitch: Bypass, distortion
• True Bypass
• Power supply with an EHX9.6DC-200 mA power supply (included)
• Dimensions: (W x D x H): 121 x 146 x 64 mm

• Delay and Looper
• 10 Delay modes and a full-featured looper
• Up to 3 seconds of delay time
• Tap Tempo via built-in or external footswitch
• Access to "hidden" parameters
• Controls: FX Level, Delay, Mode & Feedback
• Tails switch
• True Bypass
• Powered via the included EHX 9.6 DC 200 mA power supply
• Dimensions (W x D x H): 70 x 115 x 54 mm

• Reverb
• Compact design
• Easy to operate
• 3 Effect modes: spring, reverb & flerb
• Control: Reverb
• Switch: Mode: Spring/Hall/Flerb
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 105 mA
• Power supply via 9 V DC mains adapter
• Dimensions (W x D x H): 114 x 70 x 53 mm
• Includes power supply unit

Note: Battery operation is not supported.

Bundle offer comprising

• Effect Pedal for Electric Guitar & Bass
• Fuzz
• A faithful reproduction of the popular 1973 V2 Violet Ram's Head Big Muff Pi sound
• Controls: Volume, Tone, Sustain
• True bypass
• LED: Effect on
• Footswitch: Effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• AC adapter connector: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Current consumption: 2 mA
• Power supply via 9 V battery or 9 V DC power supply (suitable power adapter: Article no. 409939, not included)
• Dimensions (W x D x H): 70 x 114 x 51 mm
• Weight: 290 g

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

• Fuzz
• Low fuzz settings emulate vintage lo-fi distortion sounds like those produced by using a razor blade on a speaker cone, a loose tube or a broken channel on a recording console
• High fuzz settings result in a modern, cutting, fully saturated fuzz sound
• Controls: Vol, Tone, Rip, Fuzz
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: Barrel conenctor5.5 x 2.1 mm, negative polarity inside
• Power consumption: 10 mA
• Power supply via 9 V battery or 9 V DC power supply unit (suitable power supply unit art.409939 - not included in delivery)
• Dimensions (W x D x H): 70 x 114 x 53 mm

Bundle offer comprising

• Effects pedal
• The cult classic in a compact form
• Loved by guitarists and bass players alike for its destructive bass, unique sustain and crackle with a huge sound
• Completely own, but undeniably a big muff
• Controls: Sustain, Volume, Tone
• LED: Effect On / Off
• Footswitch: Effect Bypass
• Connections: input (6.3 mm jack), output (6.3 mm jack), power supply connector (barrel connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: 2.2 mA
• Power supply via 9 V battery or 9 V DC power supply (not included, matching power supply available under Art. 409939)
• True bypass
• Dimensions (W x D x H): 70 x 114 x 53 mm

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

Electro Harmonix 2x12 Vertical Cabinet; Speaker Cabinet for Electric Guitar; perfect for our MIG-50 and other Amps; vertical, angled construction for optimal sound dispersion; Sturdy construction with recessed Handles and reinforced Steel Corners; Equipped With: 2 x 12" EHX 12TS8 speaker/s; Cabinet Construction: Closed Back; Power Handling: 60 Watts; Impedance: 16 Ohms; Connectors: In & Out (2 x 1/4" Jack); Housing Material: 19mm (0,75") Poplar Plywood; Baffle Material: Poplar Plywood; Front Grille: Black Nylon Weave; Rearloaded; 2 x recessed side Handles, Rubber feet; Dimensions (W x H x D): 508 x 740 x 267 mm; (20" x 29,1" x 10,5"); Weight: 15,3 kg (41,9 lbs); Colour: Black

• Creates classic overdrive
• Nano Series
• Control for volume, tone and drive
• True Bypass
• Dimensions (WxDxH): 65 x 110 x 57 mm
• Powered with a 9V battery or 9V DC power supply (Coaxial connector - negative terminal inside - not included, e.g.: Article Nr 409939)

• Overdrive
• Controller for: Volume, overdrive and tone
• True bypass
• Dimensions (WxDxH): 70 x 115 x 57 mm
• Battery operation possible (Batteries included)
• 9V DC-200 power supply is needed (suitable power supply: Article Nr. 109004 - not included)

• Three separate FX loops with flexible control enable the following configurations: up to three parallel FX loops - seamless switching between FX loops in XOR mode - send an instrument to 3 separate amplifiers or mix 3 instruments into one single output.
• Controls: Dry Vol, Master Vol
• Controls CH1, 2 & 3: Return, Send, EQ, Phase
• LED: CH1, CH2, CH3 Active
• Footswitch: CH1, CH2, CH3
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Send 1, 2 & 3: 3 x 6.3 mm jack
• Return 1, 2 & 3: 3 x 6.3 mm jack
• Mains adapter connector: Coaxial power connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 45 mA
• Powered via 9V DC power adapter (included)
• Dimensions (W x D x H): 146 x 121 x 64 mm

Note: Battery operation is not supported.

• Fuzz
• Reissue of the original Version 1 Big Muffs from 1969
• Creamy, violin-like sustain
• Controls: Sustain, Volume, Tone
• LED: Effect On / Off
• Footswitch: Effect Bypass
• Connections: input (6.3 mm jack)
• Output (6.3 mm jack)
• Power supply connection (coaxial socket 5.5 x 2.1 mm, negative pole inside)
• Power consumption: 2.2 mA
• Power supply via 9 V battery or 9 V DC power supply (not included, matching power supply available under Article Nr. 409939)
• True bypass
• Compact die-cast housing
• Dimensions (W x D x H): 70 x 114 x 53 mm

• Momentary (Unlatched) button
• Enables remote control of functions in pedals equipped with an external foot switch socket
• Depending on which pedal it is connected to, the Triple Foot Controller can control tasks such as setting the tap tempo, switching between programs, selecting modes and more
• Does not require a power supply
• Works great with the Electro-Harmonix Grand Canyon Delay & Looper, 720 Looper, Superego +, Synth Engine, Mod Rex Polyrhythmic Modulator, Super Pulsar Tremolo, and many other pedals and devices from Electro-Harmonix and other manufacturers
• Dimensions (W x D x H): 70 x 114 x 51 mm
• Includes stereo jack connection cable

• 11 Different types each emulating the sound of different vintage synthesizers
• Monophonic pedal: Synthesizes one note per oscillator
• Controls: Type, Ctrl, Sens, Volume (Synth/Dry)
• Foot-switch: Preset, Bypass
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Dry output: 6.3 mm Jack
• Synth output: 6.3 mm Jack
• True Bypass
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Current consumption: 125 mA
• Power supply with a 9 V DC mains adapter (included in delivery)

Note: No battery operation possible!

• Distortion
• Controls for: Volume, Tone, Sustain, Attack and Gate
• Semi-parametric mids
• Normal / Bass Boost switch
• Q Hi / Low switch
• True bypass
• Expression pedal input
• Dimensions (W x D x H): 145 x 120 x 64 mm
• Battery operation possible (battery not included)
• Power supply is not included, suitable power supply: Art. 109004