EMG

• 2 Model SA single coils in neck and middle position
• 1 Model 81 humpback
• Output: High
• Classic EMG 81 humbucker in combination with two Alnico V single coils
• Aggressive bridge pickup and silky articulated neck and middle single coils
• Solderless system
• Magnet material: AlNiCo 5
• Cap colour: White
• Made in USA

Includes EMG-exclusive Solderless System:

• 1x 25k Volume poti
• 2x 25k Tone potentiometers
• 1x Battery bus
• 1x Stereo output socket
• 1x Input/output bus
• 1x Pickup cable
• 2x Connecting cable
• 1x Output cable
• 1x Battery cable
• Mounting screws and springs

The EMG-81 is a pickup with a strong output. It is best suited for high volumes and amps with a master volume control. If the amp is overdriven properly, the pickup produces attacks ranging from aggressive to razor-sharp (especially important with a high output pickup, but hard to find) with a lot of bite and long sustain.

• Resonance frequency: 2.25 kHz
• RMS output: 1.25 V
• Peak output: 1.75 V
• Output noise: +91 dBV
• Output impedance: 10 kOhm
• Current consumption at 9 V: 80 µA
• Battery life: 3000 h
• Colour: Chrome
• Includes EMG's solderless installation system, volume & tone potentiometers with knurled shaft, output socket, battery clip set, screws and springs

• 3 Potentiometers for electric basses
• Tandem potentiometers with active 2-Band equaliser
• Treble and bass +/- 12 dB
• 4 Center frequencies (2100, 3500, 4500, 7000 Hz) switchable
• With additional balance potentiometer and master volume potentiometer
• Only for EMG pickups

• Humbucker
• Classic EMG 81 sound in a 7-string housing
• Dimensions: 38 x 89 mm
• Quick-connect cable, volume / tone control set with knurled shafts, output jack, battery clip, screws & springs

EMG RA-2 Pro Pickguard BK; Pre-Wired Pickguard for ST-Style Electric Guitar; Pickguard Design: Black, 3-ply, 11-hole; Pickup Construction: Active Noiseless Single Coils; Output: Vintage; Positions: Bridge, Middle & Neck, Cover Colour: Black; loaded with the Crossroads Set for classic 60s/70s Strat tones; Each pickup is voiced with a different resonant frequency giving an amazing balance when combined in positions 2 or 4 and all the blues tone you’re used to in position 1, 3 and 5; all the dynamic response of vintage passive pickups without buzz or hum; Controls: 1 x Volume, 1 x Tone (Middle Pickup), 1 x Tone (Neck Pickup); Switch: 5-Way; Switch Positions: 1: Bridge, 2: Bridge & Middle, 3: Middle, 4: Middle & Neck, 5: Neck; Made in USA

EMG Crossroads Set WH; Active Pickup Set for ST-Style Electric Guitar; Positions: Bridge, Middle & Neck; Construction: Humbucker; Output: Vintage; classic 60s/70s Strat tones; Each pickup is voiced with a different resonant frequency giving an amazing balance when combined in positions 2 or 4 and all the blues tone you’re used to in position 1, 3 and 5; all the dynamic response of vintage passive pickups without buzz or hum; Wiring: Solderless, Cover Colour: White; Included: EMG's Solderless Install System: 1 x 25k volume pot, 2 x 25k tone pot, 1 x stereo output jack, 1 x 5-way selector switch,3 pair mounting screws and springs, 3 x pickup cables, 3 x connect cables, 1 x output cable & 1 x battery cable; Made in USA

• "Hum-canceling side by side" coil construction
• For neck and bridge positions
• Solderless connections
• Magnetic material: Alnico 5
• Length (bridge): 94 mm
• Length (neck): 91.1 mm
• Width: 23.4 mm
• Built-in depth: 22.9 mm
• Made in USA

Including:

• 2 x 250 k Volume knob
• 1 x 250 k clay knob
• 1 x mono jack socket
• 4 pairs of mounting screws
• 1 x bridge ground connection
• 2 x pickup cable
• 2 x connecting cable
• 1 x output cable
• 1 x bridge earth cable

EMG 89 Gold, active humbucker & single coil pickup for electric guitar, the 89 houses separate preamps and coils for a custom humbucker and single coil sound, humbucker mode is rich, warm and powerful, similar to an EMG 85, single coil mode is bright, airy, and chimey similar to an EMG SA, position: all, output: medium, string spacing: standard, wiring: solderless, magnet material: alnico 5, cover colour:, included: EMG's exclusive Solderless Install System: 25k tone pot, 25k push/pull pot, battery bus, stereo output jack, two pickup in/out bus, mounting screws and springs, pickup cable, 2 x connect cables, output cable, battery cable, cover colour: Gold, width: 69,9 mm (2,75"), height: 38,1 mm (1,5"), mounting depth: 22,9 mm (0,9"), mounting screw distance: 78,5 mm (3,09"), made in USA

• Only suitable for active EMG pickups
• Includes everything required for installation in an EMG solderless 1 or 2 pickup configuration with potentiometers and a push-pull potentiometer for dual-mode pickups (89/81TW etc.)

Set comprises:

• 2x Volume potentiometers with short corrugated axis (10 mm)
• 2x Tone potentiometers with short corrugated axis (10 mm)
• 1x Pickup bus
• 1x Power bus
• 1x 12B output jack with battery clip
• 1x Output cable
• 4x Interconnect cable
• 2x Pickup cable

• 2 x Model SA single coils in neck and center position
• 1 x Model 81 bridge humbucker
• Output: High
• Classic EMG 81 humbucker in combination with two Alnico V single coils
• Aggressive bridge pickups and silky-articulated neck and middle single coils
• Solderless system
• Magnetic material: AlNiCo 5
• Cap colour: Black
• Made in USA

Includes EMG-exclusive Solderless System:

• 1 x 25k Volume potentiometer
• 2 x 25k Tone potentiometer
• 1 x Battery bus
• 1 x Stereo output jack
• 1 x Input / output bus
• 1 x Pickup cable
• 2 x Connection cable
• 1 x Output cable
• 1 x Battery cable
• Mounting screws and springs

• Rail design with adjacent coils and ceramic magnets
• Not overwound for a more powerful bass and midrange with the crisp highs of a conventional single-coil pickup
• Position: All
• Output: High
• Connections: Solderless
• Magnet Material: Ceramic
• Colour: Black
• Made in USA

With EMG's solderless installation system:

• 250 kOhm volume and tone grooved potentiometers (9.5 mm thread length)
• Mono output socket
• Bridge grounding connector
• Bridge grounding cable
• Adjusting screws and springs
• Pickup In/Out battery bus
• Pickup cable
• Connecting cable
• Output cable

• For electric basses
• Like the BQC system but with a 5-pot design
• Only for use with EMG pickups
• Balance control (blend) and master volume with separate bass and treble pots
• Concentric mid-control (stacked)
• Solderless

• The SPC or "Strat Presence Control" is often referred to as a fat control potentiometer
• "Strat Presence Control: boosts the mids and volume of a single coil pickup for a fatter, louder humbucker-like sound
• Can also be used with a humbucker to boost the volume and mids for a fat sound
• Suitable for active and passive pickups
• Incl. Solderless connection cable, output jack and battery clip set

• Positions: bridge, middle & neck
• Output: Medium
• The most popular EMG Strat set
• Vintage single coil sound with extra mids and a higher output lends the pickup bell-like overtones and more sustain
• Connections: Solderless
• Magnetic material: Alnico 5
• Cover colour: Black
• Made in the USA

Includes an EMGs solderless installation system:

• 1 x 25k Volume potentiometer (thread length: 9.5 mm)
• 2 x 25k Tone potentiometer (thread length: 9.5 mm)
• 1 x Stereo output jack
• 1 x 5-Way selector switch
• 3 Pairs of mounting screws and springs
• 3 x Pickup cable
• 3 x Connection cable
• 1 x Output cable
• 1 x Battery cable

The EMG Afterburner (the name has nothing to do with the pleasure of Pepperoni, but is really hot) is equally suitable for active as well as passive pickups and offers an uncoloured boost, which can be continuously adjusted up to 20 dB boost. It is particularly interesting if you want to switch the distortion to the distorted lead sound simply from the guitar and to convert a good sounding but distorted tube amp to the Gainmonster without changing the basic characteristics of the Amp sound by distortion pedal.

• Up to 20 dB controllable output power
• For all sounds
• For all EMG and passive pickups

EMG 45Hz, Pick-Up for bass guitar, passive, 6-String, position: neck & bridge, the tone is warm with a smooth attack and a big mid-range response, max. string gauge up to 95,25 mm, housing dimension is 115 mm, included: EMG's exclusive Solderless Install System: 1 x 250k volume pot, 1 x 250k tone pot, 1 x mono output jack, 2 pair mounting screws, 1 x bridge ground connector, 1 x pickup cable, 2 x connect cables, 1 x output cable, 1 x bridge ground wire; made in USA

• Passive humbucker
• With over wound coils and ceramic magnets
• Hotter than a traditional PAF
• Very balanced sound with a transparent, ​​slightly lowered mid range and clear treble with great overtones
• For neck and bridge position
• Pole distance: 9.85 mm
• Colour: black
• Incl. EMG solderless installation system: 500k volume potentiometer, 500k tone potentiometer, output jack, two pickup in/ out bus, fixing screws & springs, pickup cables, 2x connection cables, output cable and grounding cable

• Positions: Bridge, Middle & Neck
• Output: Medium
• The most popular EMG ST-Style set
• Vintage single coil sound with added mids and higher output, giving the pickup "bell-like" harmonics and more sustain
• Connectors: Solderless
• Magnet material: Alnico 5
• Cap colour: White
• Made in USA

Includes EMG's solderless installation system:

• 1 x 25k volume potentiometer (thread length: 9.5 mm)
• 2 x 25k tone potentiometers (thread length: 9.5 mm)
• 1 x stereo output jack
• 1 x 5-way selector switch
• 3 pairs of mounting screws and springs
• 3 x pick-up cables
• 3 x connecting cables
• 1 x output cable & 1 x battery cable

• Position: All positions
• Medium output
• Covers a wide range of classic and modern bass sounds
• Sound: brilliant treble, warmth and powerful, tight basses
• Connections: solderless
• Magnet material: Ceramic
• Colour: Black
• Made in USA

Incl. EMG's exclusive Solderless Installation System:

• 1x 25k Volume potentiometer
• 1x 25k Tone potentiometer
• 1x Battery bus
• 1x Stereo output jack
• 4x Mounting screws
• 1x Recording cable
• 2x Connection cable
• 1x Output cable
• 1x Battery cable