FBT

Bundle offer comprising

• Active Bass-Reflex Subwoofer
• Drivers: 15" woofer with 3" voice coil
• Power: 1200 W
• Class D amplifier
• Frequency range: 42 - 120 Hz (-6 dB)
• Maximum level: 135 dB
• Crossover frequency: 80 Hz or 120 Hz
• DSP signal processor with 4 presets
• Stereo input with link out
• High-pass filter outputs: XLR (stereo)
• Phase switch 180°
• M20 Thread
• Prepared for castor mounting (castors not included)
• Enclosure material: Birch Plywood
• Dimensions (W x H x D): 455 x 586 x 570 mm
• Weight: 30.0 kg
• Colour: Black

• Active Full-Range Loudspeaker
• 2-Way
• Equipped with: 10" woofer, 1" tweeter
• Power: 1200 W Class D (LF) and 300 W Class D (HF)
• Dispersion pattern (nominal): 80° x 50° (H x V, rotatable)
• Frequency range: 58 - 20000 Hz (-6 dB)
• Maximum level: 127 dB
• DSP signal processor with 4 presets
• Bluetooth 5.0 for wireless music streaming and pairing of two speakers
• 3-Channel mixer
• Connections Channel 1 and 2: 2x XLR mic/line inputs, 2x 6.3 mm jack (balanced) inputs, 1x XLR mic/line link out male
• Channel 3: Bluetooth 5.0
• 30° and 45° slanted monitor angle
• Enclosure material: Plywood with anti-scratch coating and internal layer reinforcement
• M10 rigging points
• 35 mm Speaker flange
• Dimensions (W x H x D): 314 x 550 x 315 mm
• Weight: 13.5 kg
• Colour: Black

• Distance rod
• Length approx. 0.88 m to 1.36 m
• Height adjustment with safety splint
• Upper end: 35 mm
• Lower end suitable for 35 mm and M20 mountings
• Weight: 1.2 kg
• Colour: Black

• Professional microphone cable
• Length: 2,5 m
• Rean XLR plug (made by Neutrik)
• XLR 3 pin male / XLR 3 pin female
• Incl. hook and loop fastener
• Colour: Black

• Active 2-way bi-amplified system
• 6x 4" Neodymium woofer
• 4x 1" Neodymium tweeter with horn
• 400W Class D amplifier for the bass range
• 100W Class D amplifier for high frequencies
• Built-in switched mode power supply
• DSP Processor with 4 equalizer presets
• Control panel with volume, presets, HP filter, mic/ line, status LED
• Aluminum housing (deep drawn)
• Powder coated surface
• Tripod or wall mountable
• Frequency range: 130 - 20000 Hz
• Peak SPL: 125 dB
• Dispersion angle: 100° x 20°
• XLR Signal and power twist for power input and output
• Dimensions: 130 x 841 x 130 mm
• Weight: 9 kg
• Colour: white
• Matching stand adapter available Art. 393175, matching wall mount Art. 393178

• Suitable protective cover for ProMaxX 14 and 12
• Black

• Speaker configuration: 8" Woofer and 1" tweeter
• Continuous load: 125 W
• Recommended amplifier power: 250 W
• Nominal impedance: 8 Ohm
• Frequency range: 70 - 18,000 Hz (-6 dB)
• Sensitivity: 95 dB (1W/1m)
• Max. SPL: 126 dB
• Disprsion pattern (typical): 80° x 50° (H x V, rotatable)
• Crossover frequency: 1800 Hz
• Recommended high-pass filter: 50 Hz - 12-24 dB/oct
• Speaker-twist input and through
• 4 Mounting points with M5 thread
• Dimensions (W x H x D): 274 x 500 x 300 mm
• Weight: 12.3 kg
• Colour: Black

• Protective Cover for FBT Ventis 112M

• Protective Cover for FBT Ventis 110

• Protective Cover for the FBT CLA 1000

• Suitable for FBT CLA 118SA
• Colour: Black

• Equipped with: 15 " and 1" speakers
• Bi-amped switched-mode power supply amplifier with 350 W LF + 100 W HF RMS Class D
• 48-20000 Hz
• 90° x 60°
• Integrated DSP with 4 switchable EQ presets
• Slanted monitor angle
• XLR in/out
• Volume controls
• 2x M10 rigging points
• 35 mm Stand flange mount
• Dimensions: 410 x 663 x 387 mm
• Weight: 14 kg
• Black plastic housing

• Equipped with: 15" Neodymium woofer and 1.4" horn/driver
• Integrated switching power supply amplifier with 900 W RMS
• Coverage pattern: 90° x 60°
• Material: Polypropylene, gas injection technology
• Stand flange mount
• 4 M10 flying points
• XLR in/out
• Internal EQ
• Switchable gnd Lift
• Dimensions: 482 x 757 x 600 mm
• Weight: 28.3 kg
• Colour: Black

• Protective Cover for FBT Ventis 112

• 8"1" speaker
• Power handling: 160 Watt RMS
• Impedance: 8 Ohm
• Frequency response: 65 - 20,000 Hz
• Angle: 90 ° x 60 °
• Monitor angle
• 2x Speaker Twist NL4
• 2x M5 flying points
• 25 mm pole mount
• Dimensions: 255 x 415 x 245 mm
• Weight: 6.6 kg
• White plastic housing

• Protective Cover for FBT Ventis 115M

• Equipped with: 4x 3" Speakers
• Frequency range: 150 - 20,000 Hz
• Impedance: 16 Ohm
• Power: 60 W RMS
• 100 V Taps: 50 W or 25 W
• Maximum output: 113 dB
• Coverage pattern: 110° x 50°
• Protection class: IP55 (dust and water-proof)
• Dimensions: 100 x 368 x 125 mm
• Weight: 3.0 kg
• Colour: White

FBT Vertus CLA 206 A, Active 2x6,5"/1x1,4" Line Array column, 2-way, bi-amplified, 2x 6,5" Neodym Sub speaker, 1x 1,4" Neodym Tweeter, 600 W Class D Amplifier for Sub, 300 W Class D Amplifier for High, DSP Prozessor with 8 Equaliser-Presets, Frequency 65 Hz - 20 kHz, 133dB max. SPL, 100° x 25°, XLR and Power Twist In and Output, dimensions 1190 x 770 x 290mm, weight 20 Kg, Colour Black

• Bi-amped
• Speaker configuration: 10" Woofer and 1" tweeter
• Power: 700 W Class D (LF) and 200 W Class H (HF)
• DSP with 6 presets and 2 freely configurable memory locations
• Housing material: 15 mm Birch plywood
• Beam angle (nominal): 80° x 50° (H x V, rotatable)
• Frequency range: 58 - 20,000 Hz (-6 dB)
• Maximum SPL: 131 dB
• Inputs: XLR / jack combo socket and RCA ("Cinch" stereo)
• Link output: XLR male
• Dimensions (W x H x D): 329 x 575 x 325 mm
• Weight: 15.6 kg
• Colour: Black

• Bi-amped
• Speaker configuration: 12" Woofer and 1" tweeter
• Power: 700 W Class D (LF) and 200 W Class H (HF)
• DSP with 6 presets and 2 freely configurable memory locations
• Housing material: 15 mm Birch plywood
• Beam angle (nominal): 80° x 50° (H x V, rotatable)
• Frequency range: 42 - 20,000 Hz (-6 dB)
• Maximum SPL: 133 dB
• Inputs: XLR / jack combo socket and RCA ("Cinch" stereo)
• Link output: XLR male
• Dimensions (W x H x D): 387 x 665 x 380 mm
• Weight: 20.6 kg
• Colour: Black

• 2-Way
• Equipped with: 12" woofer, 1" tweeter
• Power: 1200 W Class D (LF) and 300 W Class D (HF)
• Dispersion angle (nominal): 90° x 60° (H x V, rotatable)
• Frequency range: 50 - 20000 Hz (-6 dB)
• Maximum level: 129 dB
• DSP signal processor with 4 presets
• Bluetooth 5.0 for wireless music streaming and pairing of two speakers
• 3-Channel mixer
• Connections Channel 1 and 2: 2x XLR mic/line inputs, 2x 6.3 mm jack (balanced) inputs, 1x XLR mic/line link out male
• Channel 3: Bluetooth 5.0
• 30° and 45° slanted monitor angle
• Enclosure material: Plastic with gas injection moulding to eliminate unwanted resonance
• M10 Rigging points
• 35 mm Speaker flange
• Dimensions (W x H x D): 356 x 619 x 357 mm
• Weight: 16.3 kg
• Colour: Black

• Protective cover suitable for the ProMaxX 10 and PROMaxX 110
• Colour: Black

• Speakers: 1x 18"
• Power: 1200 W RMS, 2400 W Peak
• Class D amplifier
• Built-in switched-mode power supply
• DSP processor with 8 EQ presets
• Frequency range: 33 - 120 Hz
• Max. SPL (sound pressure level): 134 dB
• XLR input and output
• Power Twist input and output
• Housing is made from birch plywood
• Dimensions: 555 x 572 x 660 mm
• Weight: 41.5 kg
• Colour: Black
• Suitable cover available under Article Nr 494974 (not included)