Fryette

• Easy-to-use power attenuator for volume control of high-performance tube amplifiers without the disadvantages of a conventional attenuator
• Two remote-controlled, foot-switchable controls on the front for volume, presence and depth for maximum flexibility during live performances
• Powerful mono block with 100 W from 2 KT88 tubes for incomparable response and dynamic range
• Active safety bypass function deactivates the internal power amplifier and maintains the critical load of the amplifier if the loudspeaker output socket is accidentally unplugged
• Output power: 100 watts at 2/4, 8 and 16 ohms
• Tubes: 1 x 12AX7, 2 x KT88
• Power consumption (max.continuous): 200 W @ 2/4 Ohm, 150 W @ 8 Ohm, 200 W @ 16 Ohm
• Channel A slider: Volume, Presence & Depth
• Channel B slider: Volume, Presence & Depth
• Balanced line output with level control: XLR
• Unbalanced line output 6.3 mm jack
• FX Send & Return: 2x 6.3 mm jack
• Speaker output: 6.3 mm jack
• Remote foot switch socket: 6.3 mm stereo jack
• Dimensions (W x H x D): 355 x 91x 228 mm
• Weight: 7.3 kg

Switches:

• Channel A / B
• Hi / Lo input level
• Treble Response (Flat / Brite / Edge)
• Low Frequency Response (Presence / Bass)
• Bypass (standby)
• Amplifier impedance: 2/4, 8 or 16 ohms
• FX level Hi / Lo
• Speaker impedance: 2/4, 8 or 16 ohms
• Ground lift

Connections:

• Balanced line output with level control (XLR)
• Unbalanced line output 6.3 mm jack
• FX-Send & return (2 x 6.3 mm jack)
• Speaker output (6.3 mm jack)
• Remote footswitch (6.3 mm stereo jack)
• Dimensions (W x H x D): 355 x 91x 228 mm
• Weight: 7.3 kg

• Variable reactive load box connected to an analog Zero Latency Cab and microphone simulation and a digital IR loader
• Allows silent recording of a tube amplifier
• Analog emulation and IR loader can be used individually or simultaneously
• Cab simulation can be deactivated to use an external impulse response (IR)
• 16 Pre-installed Cab-Sims, which can be modified via the supplied GUI
• Additional Cab-Sims can be installed via the USB port on the front
• Placed between amp (max. 200W) and box, the signal can be sent directly to the mixer with one or both Cab simulations
• High quality headphone amplifier
• Amp In with selectable input impedance (4, 8 or 16 ohms)
• AUX input with -20dB pad: 6.3 mm jack
• Transformer-isolated direct output: XLR and 6.3 mm jack
• Output with cab and microphone simulation: XLR and 6.3 mm jack
• Headphone connection: 6.3 mm jack
• Dimensions: (W x D x H): 222 x 156 x 70 mm
• Weight: 3.6 kg

• Size: 12" (305 mm)
• Rated power: 50 W
• Custom made by Eminence
• Magnet type: Ferrite
• Impedance: 16 Ohm
• It is well balanced and delivers tight low end, smooth midrange & crisp top end
• The P50E’s open quality & warm distortion character blends classic British crunch with full-bodied American punch without any brittle or shrill top end
• Optimized for front loaded applications
• Made in USA

• With built-in 50 Watt tube power amplifier with 6L6 tubes
• The Power Station can be used for three main applications: Power reduction of powerful amplifiers without the disadvantages of conventional power attenuators, an amplification for small amps, and as a high quality adjustable reactive load for silent recording.
• Stepless power reduction
• Effects loop-in
• Line in for preamps, laptops, MP3 players etc.
• Line out
• Amp input and speaker output 4/8/16 ohms separately switchable to match any amp or speaker
• Reduce or increase the power of small amps
• Effective tone control to equalise the sound in case of strong reduction
• Natural playing feel due to the Reactive Load, the dynamic playing feel of the amp is maintained
• Input Level Range switch well suited for use with vintage non-master volume tops
• XLR balanced out
• Silent Direct Recording via the unbalanced output
• Weight: 6.8 kg
• Dimensions (H x W x D): 91 x 355 x 228 mm
• Matching gig bag: Art.441103 (not included in delivery)

• All-tube amplifier with 2 x 50 W
• Patented transformer technology allows for a height of only one rack height unit and yet high reliability and quiet operation
• The "Linear" mode delivers a full-range signal with flat response, while the "Enhanced" mode brings the colour and life to the sound that you would expect from a Fryette amplifier
• Power: 2 x 50 watts
• Preamp tubes: 2 x 12AX7
• Power tubes: 4 x 6L6GC
• Control: Volume
• Switches: Presence, Depth, Mono/Stereo
• Speaker outputs A & B: 4x 6.3 mm jack
• Input A & B: 2x 6.3 mm jack
• Line output A & B: 2x 6.3 mm jack
• Output impedances: 4, 8 & 16 Ohm
• Dimensions (W x D x H): 445 x 318 x 44 mm
• Weight: 9.1 kg
• Made in USA

• Customised protection for the Fryette Power Station PS1 & PS2
• High-quality, water-repellent outer material made of 600D polyester
• 20 mm thick, dense inner foam padding
• Reinforced top and bottom
• Durable strap around the entire bag for extra durability and comfort
• Adjustable and removable shoulder strap with wide shoulder pad
• Metal fittings
• Metal closures
• Embroidered Fryette logo
• Front pocket for cables and other accessories
• Dimensions (W x D x H): 483 x 330 x 127 mm

Fryette Power Station Basic Rack Mount Kit, 2-space rack mount kit with steel support brackets and high grade mounting hardware, Black Anodized Brushed Aluminum Front Panel with powder coated steel support brackets, Custom made for the Power Station PS-1, PS-2 & PS-100, Dimensions: 483 mm (19") X 860 mm (3.38”)

• All-tube DI solution for Live & Recording
• 1 Watt all-tube amplifier with integrated Reactive load and loudspeaker simulation
• 1 Channel
• Power: 1 W
• Tubes: 3x 12AX7, 1x 12DW7/ECC832
• Controls: Gain I, Gain II, Treble, Middle, Bass, Volume, Dynamics, Contour, Emphasis, Level
• Switches: Voicing, More/Less, Cab + Mic In/Out, Air/Bite, Power, AUX Level, Ground Lift
• Speaker outputs: 1x 6.3 mm jack
• Effect loops: Headphone FX Loop Snd (1x 6.3 mm jack), Return (2x 6.3 mm jack)
• Connections: Headphone Out (1/4" jack), Program In (3.5 mm jack), AUX Input (1x 6.3 mm jack), Amp Line Out (1x 6.3 mm jack), DI Out 1 (1 x XLR & 1x 6.3 mm jack), DI Out 2 (1 x XLR & 1x 6.3 mm jack)
• Dimensions (W x D x H): 218 x 157 x 91 mm
• Weight: 2.5 kg