IK Multimedia

• Omnidirectional
• Free field
• Calibrated frequency response when used with ARC: 20-20,000 Hz +/- 0.5 dB
• Transformerless output
• Electronically balanced
• Impedance: 100 Ohm
• Signal-to-noise ratio: 65 dB (A)
• Maximum sound pressure level: 124 dBSPL
• Phantom power: 12 - 48 V
• Dimensions: 129.5 mm x 23 mm
• Weight: 25 g
• Scope of delivery: measurement microphone and microphone clamp

• Fully automatic integrated digital calibration via supplied measuring microphone
• Completely DSP-controlled
• 1" Tweeter and 2x 3.5" woofer / mid-range driver
• With powerful bass reflex system
• Separate Class D amplifiers for tweeter and woofer with 30 and 70 W RMS respectively
• Vertical or horizontal positioning
• Table tripod inclinable from 0° to 20°
• Balanced XLR / jack combo inputs
• 3.5 mm Mono jack input for ARC measuring microphone
• Maximum level (1m): 103 dB SPL
• Frequency response (+/- 2dB): 50 Hz - 24 kHz
• Linear-phase crossover at 3.1 kHz with variable edge steepness
• High-shelf filter: +/-2 dB @8 kHz
• Low-shelf filter: +2/-3 dB @100 Hz
• Desktop filter: -4 dB @160 Hz, +1 @ 1.8 kHz
• Dimensions: 264 x 160 x 130 mm
• Weight: 2.5 kg
• Includes mains cable, ARC measuring microphone with connection cable, swivelling table stand, feet for horizontal installation and locking key

• For mobile devices, computers or DSLR cameras
• 0.55" Gold-sputtered electret condenser microphone capsules with supercardioid polar pattern
• Suppression of off-axis noise for clean recordings
• Snap-on magnetic mounting, even with a case
• Headphone output with switchable direct output
• High-quality AD / DA conversion with up to 24 bit / 96 kHz
• Power supply via USB or optional CR1632 battery (not included)
• Frequency response: 20 - 20,000 Hz
• Sensitivity: 10 mV / Pa
• Maximum sound pressure level: 125 dB
• Headphone connection: 3.5 mm TRS jack
• Dimensions: 45 x 130 x 55 mm
• Weight: 65 g
• System requirements: from Win7, from Mac OSX 10.6, from iOS 6, from Android 5 with USB digital audio support
• Includes iRig Recorder LE for iPhone / iPad or iRig Recorder 3 for Android, Lightning to Micro-USB adapter cable 16 cm, USB-C to Micro-USB adapter cable 30 cm, OTG to Micro-USB adapter cable 16 cm, 3 , 5 mm jack cable, hot shoe adapter, wind protection and 2 magnetic holders

Compatible iOS devices:

• iPhone XS Max
• iPhone XS
• iPhone XR
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPad Pro 10.5-inch
• iPad Pro 12.9-inch (2nd generation)
• iPad Pro 9.7-inch
• iPad Pro 12.9-inch (1st generation)
• iPad mini 4
• iPad Air 2
• iPad mini 3
• iPad Air
• iPad mini 2
• iPad (6th generation)
• iPad (5th generation)

• 16 Modulation algorithms available
• AD/DA with 24bit / 192Khz
• Frequency range: 5 - 24000 Hz
• Dynamic range: 123 dB
• Five rotary controls
• One multifunction knob
• 100+ Factory presets
• 100+ User presets
• Press-and-hold for user-defined functions
• True or soft bypass selectable
• Bypass function
• MIDI implementation
• Macros to control multiple parameters simultaneously
• Cabinet simulator with five presets
• LED display
• Robust metal housing
• Dimensions (W x D x H): 175 x 145 x 58 mm
• Includes power supply (9V DC, centre negative)

Connections:

• 1x Instrument input: 6.3 mm jack
• 1x Expression pedal input: 6.3 mm jack
• 2x Main Out: 6.3 mm jack
• 1x Headphone output: 6.3 mm jack
• 1x MIDI in/out: 5-pin DIN
• USB and power supply connection
• USB connection for Librarian app and audio interface function

• Suitable for IK Multimedia iRig Keys I / O 49 (Art. 420955)
• With front pocket for cables and accessories
• Adjustable strap
• Embroidered logo
• Material: 100% polyester
• Dimensions: 73 x 27 x 11 cm
• Colour: Black

Bundle offer comprising

• Universal Audio and MIDI Interface for Mobile Devices and Computers
• Combination input XLR and 6.3 mm jack for microphone, line and instrument signals
• High-quality preamplifier with adjustable gain
• High-quality ADDA conversion with up to 24 bit / 96 kHz
• Adjustable stereo headphone output
• MIDI input and output
• Power supply via USB, 2x AA batteries or optional mains adapter (not included)
• Headphone output: 3.5 mm stereo jack unbalanced, 100 mW at 50 Ohm
• MIDI input and output: 2x 2.5 mm mono jack
• Power supply connection 5.4 V DC (optional power supply: Article no. 417705, not included)
• Device connection Mini-DIN
• Dimensions: 43 x 127 x 37 mm
• Weight: 120 g (without batteries)

Microphone input:

• XLR balanced
• +48V +/-4V Phantom powering
• 40 dB gain
• Impedance 1.6 kOhm
• Frequency range: 20-20000 Hz +/-1.5 dB
• Noise level -103 dB(A)
• -97 dB RMS

Instrument input:

• 6.3 mm jack, unbalanced
• 27 dB gain
• Impedance 1 MOhm
• Frequency range: 20-20000 Hz +/-1.5 dB
• Noise level -103 dB(A)
• -97 dB RMS

Includes:

• iRig Pro I/O Audio MIDI Interface
• Lightning to mini-DIN adapter cable 0.6 m
• USB to Mini-DIN adapter cable 0.6 m
• 2x 2.5 mm jack MIDI adapter cable 1.6 m
• 2x 1.5 V AA battery
• Comprehensive software package AmpliTube 4 and AmpliTube 5 SE as download via manufacturer/app store

• IK Multimedia PSU 3A
• External original power supply for the IK Multimedia iRig Pro I/O (Article Nr 406088)
• Apple MFi certified
• Allows iOS devices to be charged while the iRig Pro I/O is in use
• Output: 5V DC, 3A

• 37 Standard size velocity sensitive keys
• Integrated headphone output
• Volume control
• 4 Double assignable knobs
• 1 Assignable push encoder
• Octave up / down button
• Program up / down button
• Setup button
• Micro USB connection
• MIDI-In: 2.5 mm jack
• MIDI-Out: 2.5 mm jack
• Headphone output: 3.5 mm stereo jack
• Pedal input: 6.3 mm TRS jack
• Dimensions: 605 x 212 x 64 mm
• Weight: 1.87 kg
• Includes software package (download after registration), Lightning micro USB cable 60 cm, USB A micro USB cable 60 cm, USB-C to micro-USB cable and 2.5 mm jack DIN adapter cable 10 cm

• Adjustable input level
• Galvanic isolation of inputs and outputs
• Switchable ground lift for amp and line out
• XLR line out
• Dimensions: 137 x 158 x 45 mm
• Weight: 0.95 kg
• Incl. 9 V power supply and TONEX SE software bundle

• Audio interface specially designed for guitarists
• Hi-Z instrument input at the front, of which input 1 is with Z-Tone (variable impedance)
• JFET circuit adds subtle harmonic enhancements + Active circuit for optimal operation with active pickups
• Input for line- and microphone signals with discrete class-A preamps and switchable 48 V phantom power
• Mic/Line input on the back via XLR/jack combo socket
• 1 Amp output on the front for re-amping
• 2 Balanced line outputs on the back with 6.3 mm TRS jacks
• 1 Stereo headphone output to 6.3 mm stereo jack with own control
• Monitor- and master volume controls
• 2 Inputs for expression pedals or footswitches for real-time control of virtual guitar effects
• AD/DA conversion with 24-bit/192 kHz
• 117 dB Dynamic range
• MIDI input/output
• Dimensions: 195 x 195 x 53 mm
• Weight: 1 kg
• System requirements: from Windows 7 (64-bit), from Mac OSX 10.11 (64-bit)
• Includes a comprehensive software package (downloadable) with AmpliTube 5, ToneX, 10 T-RackS processors and Ableton Live Lite, as well as a 1.5 m USB cable

• Very compact design for portable use
• 2 Combined mic / instrument inputs via combination jacks
• 2 High-quality microphone preamplifiers with individually adjustable gain and phantom power
• 2 Balanced line outputs
• Headphone output with volume control on 3.5 mm stereo mini jack
• Switchable direct monitoring
• AD / DA conversion with 24 bit / 48 kHz
• MIDI in / out
• USB powered
• 9 Volt power supply (optional) or batteries (2x AA)
• Microphone inputs: 2x XLR balanced
• Phantom power: + 48V +/- 4V
• 50 dB gain
• Impedance 3.2 kOhm
• Frequency range: 20 - 20000 Hz
• Noise level -103 dB (A)
• Instrument inputs: 2x 6.3 mm jack unbalanced
• Gain: 27 dB
• Impedance 1 MOhm
• Frequency range: 5 - 21000 Hz
• Noise level -104 dB (A)
• Line outputs: 2x 6.3 mm jack balanced, max. Output level: 16 dBu / 600 ohms
• Frequency range: 10 - 21000 Hz
• Dynamic range: 106 dB (A)
• MIDI input and output: 2x 2.5 mm mono jack
• Power supply connection 9 V DC 500 mA
• Device connection mini-DIN
• Dimensions: 127 x 75 x 37 mm
• Weight: 197g without batteries
• System requirements: iOS 7.0, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad (6th generation), iPad (5th generation), iPod touch (6th generation), from Android 5 on devices with USB digital audio functions, from Win7, from Mac OS X 10.6

Scope of delivery:

• iRig Pro Duo
• Lightning on mini DIN cable 0.6 m
• USB-C on mini-DIN cable 0.6 m
• USB to mini-DIN cable 0.6 m
• 2 x 2.5mm jack on MIDI cable 0.1 m
• 2 x 1.5 V AA batteries
• AmpliTube 4 and AmpliTube 5 SE

• An audio interface especially designed for guitarists
• 2 Inputs for instrument, line and microphone signals
• With discrete Class A preamplifiers and switchable 48 V phantom power
• Front-panel Hi-Z instrument inputs, including input 1 with Z-Tone (variable impedance)
• JFET circuit for subtle harmonic additions and active switching for optimal operation with active pickups
• Rear mic / line inputs via XLR / jack combo jacks
• 1 Front panel amp output for re-amping
• 4 Rear balanced line outputs on 1/4" TRS jack
• 1 Stereo headphone jack on 6.3 mm stereo jack with its own control
• Monitor and master volume controls
• Built-in guitar tuner
• Preset knob for controlling plugin parameters
• 2 Inputs for expression pedals or footswitches for real-time control of virtual guitar effects
• AD / DA conversion with 24 bit / 192 kHz
• 117 dB dynamic range
• MIDI in/out
• With extensive software package (download) with AmpliTube 4 Deluxe, AmpliTube 5 SE, 10 T-RackS processors and Ableton Live Lite
• System requirements: Windows 7 (64 bit), Mac OSX 10.11 (64 bit)
• Weight: 1.3 kg
• Dimensions: 238 x 211 x 53 mm
• 1.5 m USB cable and power supply unit included

• With digital interface for iPhone, iPad, iPod touch, Mac, PC and Android
• 1" large diaphragm capsule
• Directional Characteristics: Kidney
• Interface Type: USB Digital microphone with built-in preamplifier
• Frequency range: 20 - 20000 Hz
• -3 dB
• Gain Range: 40 dB
• Max. SPL: 133 dB
• Sensitivity: -42 +/- 3 dB at 1 kHz, 0dB = 1V / Pa
• Resolution and sample rate: 24 bit up to 48 kHz
• Connection: Standard Micro-USB
• Headphone output: 3.5 mm jack
• Power supply via connected device
• Controls for microphone pre-amplification and headphone volume
• Multi-colour LED for status and audio level
• Dimensions: 15 x 117 mm
• Weight: 218 g
• Cable length 150 cm
• Colour: Black
• Scope of delivery: Lightning connection cable, OTG connection cable, USB connection cable, protective sleeve, microphone clamp, table stand

Requirements for iOS devices:

• IPhone 4, iPhone 4, iPhone 4, iPhone 4, iPhone 4, iPhone 4, iPad 2, iPad 2, iPad 2, iPad 2, iPad 2, iPhone 4, iPhone 4, iPad 4th generation, iPad mini, iPad 3rd generation, iPad 2 and iPad
• IOS 5.1 or later is required

Note: requires optional 30-pin cable (item 367062)

Requirements for Android devices:

• Compatible with Android devices that support Samsung Professional Audio Technology, such as Samsung Galaxy S6, Galaxy S6 Edge, Galaxy Note 4 and Galaxy Note Edge, Galaxy S5 and Galaxy Note 3 - an installed Android 5 is also required
• Compatible with any Android device that is equipped with USB (OTG) port - in addition, an installed Android 5 is required
• Apps must support (OTG) USB audio input (please note the apper)

Requirements Computer:

• Mac OS X 10.6 or later
• Windows: needs ASIO4ALL (Download) Drivers for Windows XP / Vista / 7/8