K&K

• Two pickups
• For double basses, cellos, bongos, congas, hand drums, guitars, harps, saz instruments, sitars
• Mount the pickup on the top by with adhesive film
• Mount the jack (6.3 mm) at any point with self-adhesive clamp
• Frequency range: 20 Hz - 15 kHz

• Passive 3-way pickup for steel string acoustic guitars
• With volume control
• Mounts inside the instrument

• For internal pick-up in the instrument
• Specially designed for fan-braced ukuleles
• For mounting the 6.3 mm (1/4'') jack socket a hole is necessary

Consists of:

• Pure mini pickup

Trinity Microphone

• Integrated 5" gooseneck
• Frequency range from 20 - 20,000 Hz

Trinity Pro Preamp:

• 2-Channel external preamp
• Gain / volume / bass / middle / treble on both channels
• Phase switch for the microphone channel
• Incl. Stereo output jack and stereo cable

• Passive 4-head pickup for nylon stringed acoustic guitars
• Volume control
• Installation of the pickup is inside of the instrument

• For double bass
• Original rockabilly sound

• Mounting system is completely internal
• The two pickups can be mounted on the inside of the mandolin top (in the intrument!) with double-sided adhesive tape
• Both the transducer and the jack connector must be installed inside the instrument
• Installation should be carried out by an experienced instrument technician!
• Cable length approx. 18 cm
• Transducer size: 16.5 x 23 mm
• Input impedance: High ohmic
• 6.3 mm Mono jack connector
• Suitable for all mandolin types

• Specially designed for acoustic guitars, but also very well suited for many other acoustic instruments
• Excellently suited in combination with the Pure pickups
• Special broadband center filter
• +/- 20 db bass
• Center and height controls
• Internal gain trimmer
• Frequency response: 10 - 30.000 Hz
• Bass control starts at 100 Hz
• Midrange filter from 1.5 kHz
• Altimeter controls at 10 kHz
• Input impedance: 1 MOhm
• Output impedance 10 kOhm
• Battery life: approx. 180 hours

• For hand drums and other percussion instruments
• Particularly small size, therefore especially suitable for small instruments
• Linear frequency response
• High output level compared to the size
• Ideal for the "slap" in rockabilly bass range

The Dual Channel Pro Preamp is a two-channel, belt clip mixer that allows you to blend two pickups. It is compatible with both piezo and magnetic pickups. The Dual Channel Pro Preamp features extremely low-noise operation. It can process high input peaks without distortion and offers an incredible dynamic range.

• Frequency range: 10 - 30,000 Hz
• Input Impedance: 1 Mega Ohm
• Output Impedance: 3 K Ohm
• Average current: 3.5 mA
• Battery hours: about 60 h
• Dimensions: 110 x 85 x 38 mm / 4+3/8" x 3+3/8 x 1+ 1/2"
• Input and Output jacks: 1/4" instrument jacks
• Bass, mid, treble EQ, gain and volume controls per channel

• Can be easily mounted on all Maccaferri guitars
• The pickup consists of 2 sensors - 1x top pickup, 1x bridge pickup
• The top pickup is mounted with double-sided adhesive tape, the bridge pickup held in place by pressure
• The 6.3 mm jack is also attached by double-sided adhesive tape
• The tape is included and does not damage the paint of the instrument

• Excellent for finger style playing
• Mount the 4 transducers by using the included tape
• The input jack (6,3mm) is to be mounted on the strings between bridge and tailpiece

• To take the slap sound from the double bass in Rockabilly
• The pickup is fixed under the fingerboard with double-sided adhesive tape

• For steel stringed acoustic guitars
• Mounting takes place in the interior of the instrument

• The two pickups can be mounted on the inside of the mandolin top (inside the intrument!) with double-sided adhesive tape
• Precise installation instructions and special tools are included
• Cable length approx. 27 cm
• Transducer size: 16.5 x 23 mm
• Input impedance: High ohmic
• 6.3 mm Mono jack connector
• Mounting is done on the edge of the frame with chinrest screws (only for F and A style mandolins)

• Produce an extra strong transmission of the lows and very well articulated mids
• Dimensions of the 3 pickups (H x L): 22 x 61 mm (0.86" x 2.4")

• Pickup to be mounted in the bridge
• The input jack (6,3mm) is to be mounted on the strings between bridge and tailpiece