Klark Teknik

• Neutrik XLR/jack combo sockets with HiZ input
• Stereo mini jack input
• Phantom power can be switched separately for each channel
• Sum switch routes both inputs to both outputs
• Split switch routes left input to both outputs
• 20 dB input pad and ground lift switchable
• Dimensions (W x H x D): 118 x 63 x 142 mm
• Weight: 0.65 kg

• Suitable for instruments and multimedia applications
• Midas transformer
• Operation with +48 V phantom power or built-in 9 V battery (not included)
• Automatic switchover to battery operation if phantom power is lost
• XLR and 6.3 mm jack (mono) inputs
• Neutrik XLR output
• Pad switch: 0 / -20 / -40 dB
• Ground lift
• Power switch
• Input impedance: >250 kOhm
• Output impedance: >600 Ohm
• Signal-to-noise ratio: -112 dBu
• Sturdy, compact aluminium housing with protective hard rubber corners
• Dimensions (W x H x D):118 x 64 x 112 mm
• Weight: 0.56 kg

• Especially suited to multimedia applications
• Midas transformer
• Inputs: 2x 6.3 mm jack, 1x 3.5 mm mini-jack (stereo) and 2x RCA
• Neutrik XLR outputs
• 15 dB pad switch
• Ground lift
• Input impedance: 30 kOhm
• Output impedance: 600 Ohm
• Frequency range (±1 dB):: 20 Hz - 30 kHz
• Signal-to-noise ratio: 105 dBu
• Sturdy, compact aluminium housing with protective, hard rubber corners
• Dimensions (W x H x D): 118 x 64 x 112 mm
• Weight: 0.53 kg

• Fully automatic operation with configuration-free setup
• Provides up to 10 dB increase in system gain
• Instantly detects and stops acoustic feedback
• Fast and precise DSP selects and applies up to 32 filters per channel
• Two fully independent audio channels for processing stereo or separate zone signals
• Extremely narrow filters (down to 1/30th octave) to maintain overall signal integrity
• Front-panel control with suppression and filter reset buttons
• Two balanced/unbalanced inputs - line-level XLR/TRS combo and 3-pin Euroblock connectors
• Automatic 100-240VAC universal Switched-mode power supply
• Dimensions (H x W x D): 50 x 483 x 296 mm
• Weight: 2.9 kg

• 20 dB PAD
• Ground lift
• Inputs: 2 x 6.3 mm jack and 3-pole XLR
• Outputs: 3-pole XLR
• Frequency range: 20 - 20.000 Hz
• Aluminium housing
• Dimensions (W x H x D): 118 x 63 x 112 mm
• Weight: 0.44 kg

• Midas transformer
• 2x 6.3 mm jack inputs
• 2x -15 dB pad switch
• Ground lift
• Neutrik XLR outputs
• Sturdy, compact aluminium housing with protective, hard rubber corners
• Frequency range (±1 dB): 20 Hz - 30 kHz
• Input impedance: 500 kOhm (10 kOhm/PAD)
• Output impedance: 150 Ohm (at 1 kHz)
• Signal-to-noise ratio: 108 dBu
• Dimensions (W x H x D): 118 x 64 x 112 mm
• Weight: 0.54 kg

• For radio transmission of a stereo audio signal together with the DW 20T (sold separately)
• Maximum range: 30 m
• Outputs: 2 x XLR male or 2 x 6.3 mm jack (unbalanced)
• External power supply: 12V / 400 mA (plus inside)

• 1 Input: XLR
• 2 Outputs: XLR
• 1 Thru: XLR
• Ground lift switchable per output
• Neutrik connectors
• Sturdy, compact aluminium housing with protective corners made of hard rubber
• Dimensions (W x H x D): 118 x 64 x 120 mm
• Weight: 0.6 kg
• Design and developed in the UK

• Outputs 2 x 6.3mm jack (unbalanced) and 2x XLR male (balanced)
• Range: up to 30 m
• Bluetooth version: 4.2
• Output impedance: 240 ohms
• Housing made of extruded aluminium
• With rubber corners (removable)
• External power supply (12 V DC, 400 mA, plus inside)
• Dimensions (H x W x D): 62 x 116 x 112 mm
• Weight: 0.6 kg
• Colour: Silver grey
• Includes wall and ceiling mount for permanent installation

• USB 2.0 extension for Midas and Behringer digital consoles
• 32-channel live recording and playback on two SD / SDHC memory cards
• up to 3 hours recording of 32 channels in one session possible (48 kHz / 32-bit PCM saved as uncompressed
• SD cards and USB interface work independently
• two SD card slots to separate virtual soundcheck and live material, or to extend the maximum recording time
• more than 12 hours non-stop recording of 8 tracks possible (Sample-accurate Automatic Spanning Feature)
• Instant Live Playback with preload and markers in the console and in the remote apps
• seamless computer connectivity for virtual soundchecks and software plug-ins
• Compatible with CoreAudio on Mac OSX
• ASIO driver for Windows PC with extremely low latency available

• Up to 25 dB gain
• 48 V phantom power
• XLR input / output
• Frequency range: 10 - 20,000 Hz (± 1 dB)
• Dimensions: 38 x 39 x 85 mm
• Weight: 0.25kg

• With stereo input/summed mono output
• Midas transformer
• Inputs: 3.5 mm Mini Jack Stereo and RCA (L/R)
• Separate level controls for both channels
• Ground lift
• Neutrik XLR output (mono summed)
• Input impedance: 7 kΩ
• Output impedance: 170 Ohm
• Sturdy, compact aluminium housing with protective corners made of hard rubber
• Dimensions (W x H x D): 118 x 64 x 112 mm
• Weight: 0.47 kg

• For 32-channel low-latency AOIP in WAVES Soundgrid network interface of Behringer X32 and Midas M32 consoles
• Mix, record and playback with Soundgrid plug-in
• Soundgrid studio application for ASIO / Core Audio recording and playback
• 32 Input and output channels
• Sampling rate: 44.1 kHz / 48 kHz
• 24 Bit PCM
• Dimensions: 30 x 165 x 138 mm
• Weight: 0.14 kg

• Up to 32 bidirectional channels at 48 kHz sampler rate
• Transmission up to 500 m via fibre optic cable and 100 m via coaxial copper cable
• Optical transmission to SC duplex connector
• Copper transmission to 75 Ohm coaxial cable with BNC sockets
• Dual redundant operation with failover from optical to copper connections
• MADI Clock Master or MADI Clock Slave
• 32 Inputs and outputs (1-32, 33-64) can be selected from 64 MADI channels

• For up to 64 bidirectional channels @ 48 kHz and 32 channels @ 96kHz
• Compatible with Klark Teknik DN9650 and DN9652 Network Bridge as well as Midas Neutron-NB extension module
• Operation with up to 500 m optical fiber optic cable or 200 m coaxial copper cable
• SC duplex connections
• 75 Ohm coaxial BNC connectors
• AES10 compatible
• Double redundancy with switchover from optical to BNC connection in the event of a fault
• Madi clock master, slave or external clock
• Module format: Cirrus CM-1 compatible
• Dimensions (W x H x D): 110 x 31 x 89 mm

Klark Teknik Vnet2-Dante Bridge - VNET2 connection bridge for Dante audio source; converts Dante audio to analogue audio; 2 XLR Outputs; PoE; dimensions (HxWxD): 43x116x116 mm; weight 0,5 kg;

• For radio transmission of a stereo audio signal together with the DW 20R (sold separately)
• Maximum range: 30 m
• Inputs: 2 x XLR female or 2 x 6.3 mm jack (unbalanced)
• Switch for mono / stereo operation
• External power supply: 12V / 400 mA (plus inside),

• With BBD technology
• Legendary Analogue Spatial Sound Processor
• Authentic reproduction of the original analogue circuitry
• Sound effects based on authentic BBD (Bucket Brigade Delay) technology
• Switchable bypass
• Frequency response: 20 - 20,000 Hz, +0/-3 dB
• Inputs: 2x XLR, 2x 6.3 mm jack balanced
• Outputs: 2x XLR, 2x 6.3 mm jack balanced
• Remote: 6.3 mm mono jack
• Switchable stereo/mono mode
• Power consumption: 10 W
• Dimensions (H x W x D): 88 x 483 x 158 mm
• Construction: 19" / 2 U
• Weight: 2.5 kg

• Gain: 25 dB
• Phantom power: 48 V
• 2 XLR inputs / outputs
• Frequency range: 10 - 20,000 Hz (± 1 dB)
• Dimensions: 65 x 39 x 85 mm
• Weight: 0.37 kg