KMA Audio Machines

• Delay and Reverb
• With a delay side and a reverb side with the main basic controls as well as a Mix knob
• In addition, the Cirrus offers 3 different delay and reverb modes, each with a dynamic function controlled by the attack and Sensitivity Control to allow for funky, celestial sounds
• Controls: Delay, Reverb, Time, Decay, Damp, Sens, Repeats, EXP Mode
• Switches: Reverb Mode, Delay Mode, Subdivision, Effect Order
• Foot switch: Effect bypass, tap tempo
• Input and output: 6.3 mm jack
• Expression: 6.3 mm stereo jack
• Effect Loop: 2x 6.3 mm jack
• Power adapter connector: Hollow socket 5.5 x 2.1 mm, negative pole inside, current consumption: 220 mA
• Power supply via 9 V DC power adapter (not included - suitable power supply: Article no. 409939)
• Dimensions (W x D x H): 90 x 120 x 62 mm
• Weight: 420 g
• Made in Germany

Note: Battery operation not possible.

• Open and very touch-responsive
• High-headroom-design (up to 25 dB)solos
• Perfect for use as a preamplifier with IR Cab-Sim or amp-less
• 3-band Active EQ with adjustable middle frequency
• Middle footswitch to boost solos
• Expression Pedal input drives the middle frequencies for fast, wah-like sounds or long phaser-style filter sweeps
• Controls: Level, Drive, Mid C/B, Mid Frequency, Low, High
• Switches: Pre / Post Mids
• Footswitch: Effect Bypass, Mids
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Power adapter socket: Barrel connector socket 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 30 mA
• Powered with a 9 V DC power supply (Suitable power supply: Article Nr. 409939, not included)
• True bypass
• Dimensions (W x D x H): 90 x 120 x 62 mm
• Weight: 400 g
• Handmade in Germany

Note: Battery operation is not supported.

• Fuzz/Distortion
• Very flexible, well balanced BM-style pedal
• Three different gain modes
• Pre- or post-EQ
• Clean blend
• Active bass and treble controls
• Parametric mid EQ controllable via footswitch and expression pedal as well as a switchable top boost for even more raw bite
• Controls: Disruption, Clean, Master, Highs, Lows, Mid Freq, Mids Cut/Boost
• Switch: Clip Style, EQ Position, Top Boost
• LED: Effect On, Mids
• Foot switch: Effect On, Mids
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Expression pedal input: 6.3 mm stereo jack
• Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 160 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art.409939)
• True bypass
• Dimensions (W x D x H): 121 x 146 x 60 mm
• Weight: 520 g
• Handmade in Germany

Note: Battery operation is not supported.

• Classic, four-stage JFET-based phaser
• Has a wide range of phasers ranging from classic to the future
• A mix knob adds the raw signal for clarity
• The switchable EMPH allows additional, oscillating sounds
• Controls: Emph, Signal, Mix, Depth, Spurt
• Hand switch: Emph on / off
• Foot Switch: Effect Bypass
• Connections: Input (6.3 mm jack), output (6.3 mm jack), 9 V DC power supply connection (coaxial socket 5.5 x 2.1 mm - negative pole inside)
• Power consumption: 5 mA
• Power supply with a 9 V DC power supply (not included)
• True Bypass
• Dimensions (W x D x H): 92 x 118 x 53 mm
• Weight: 350 g
• Handmade in Germany

• Flexible metal distortion pedal
• Inspired by one of THE classic heavy metal pedals
• Successor of the WURM with improved electronics
• Silent circuit & more compact format
• Controls: Volume, Terror, Highs, H-Mids, L-Mids, Lows - internal: Highs Q, H-Mids Q, L-Mids Q, Lows Q
• Switch: EQ style switch (KMA/HM-II/Both).
• Internal switch: Input Buffer (On/Off)
• LED: Effect On
• Footswitch: Effect On
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 50 mA
• Power supply via 9 V DC mains adapter is not included in delivery, suitable mains adapter: article no. 409939
• True bypass
• Dimensions (W x D x H): 74 x 128 x 60 mm
• Weight: 350 g
• Handmade in Germany

Note: Battery operation not supported.

• Inspired by the Jordan Bosstone Fuzz, which had a legendary sound but also a lot of problems
• KMA's heavily redesigned circuitry retains that old-school sound but gives it some modern details by tweaking the bass and adding a bias control to explore many new sonic possibilities
• Version 2 with top-mounted jack sockets
• Relay-based silent circuit and improved electronics
• Controls: Gain, Skin/Meat (Bias), Vol
• LED: Effect On
• Footswitch: Effect On
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 35 mA
• Power supply via 9 V DC mains adapter (not included, suitable mains adapter: art. 409939)
• True bypass
• Dimensions (W x D x H): 74 x 128 x 60 mm
• Weight: 350 g
• Handmade in Germany

Note: Battery operation is not supported

• Phaser
• JFET technology
• 8 Different waveforms
• Controls for LFO, Envelope, Phasing
• Stereo outputs
• FX loop
• Tap Tempo function
• 9 V DC power supply connection (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption 80 mA
• Power supply with a 9 V DC power supply (not included)
• Dimensions: 125 x 153 x 58 mm
• Weight: 0.55 kg
• Handmade in Germany

• KMA's WURM distortion with additional noise gate
• Perfect for metal
• A graphic 4-band equaliser with variable centre frequencies together with 3 different high-mids settings
• 3 Different clipping styles as well as a TRS effect loop and an external trigger input for the noise gate allow for maximum sonic flexibility
• Controls: Gain, Low, L-Mid, H-Mid, High, Low centre frequency, L-Mid centre frequency, H-Mid centre frequency, High centre frequency, Gate, Master
• Switch: Clip style, EQ style
• LED: Distortion On, Noise Gate On
• Foot switch: Distortion On, Noise Gate On
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• FX Loop: 6.3 mm stereo jack
• EXT Trigger: 6.3 mm jack plug
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 100 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art. 409939)
• True bypass
• Dimensions (W x D x H): 146 x 121 x 60 mm
• Weight: 584 g
• Handmade in Germany

Note: Battery operation is not supported