Marshall

• 2 Channels: Clean and Overdrive
• Power: 15 W RMS
• Equipment: 8" Loudspeaker
• 3-Band tone control works on both channels
• Reverb
• MP3 / Line input
• Emulated headphone output
• Closed housing
• Weight: 7.4 kg

• Material: plastic
• Colour: black
• Set includes two pieces
• Not suitable for the AS50, AVT, or Valvestate combos

• Footswitch for TSL60, TSL100
• Quintuple footswitch with LED
• 8m cable
• 3 Buttons
• Screwed steel casing
• Kink protection and grommet
• 6-pin DIN plug
• Caption: "Clean - Crunch - Lead - Reverb - FX"
• Dimensions: 326 x 48 x 112 mm

• For NEW MG series (MG50FX,MG100HFX,MG101FX,MG102FX)
• Clean / Crunch / Overdrive / Channel switchover

• All Tube: 3x ECC83 & 2x 5881 tubes
• Power: 30 W
• Custom shop production
• Input patching
• Controller for presence - bass - middle - treble - high treble/ loudness 1 - normal/ loudness 2
• Speaker outputs for 4/ 8/ 16 Ohm
• Dimensions (W x H x D): 660 x 260 x 210 mm
• Weight: 14.6 kg

• Power: 20W
• 2 Channels
• Preamp tubes: 3x ECC83
• Power amp tubes: 2x EL34
• 1 Input
• Controls: Presence, bass, middle, treble, output master, lead master & input gain
• Speaker connectors: 1x 16 Ω, 1x 8 Ω (2x 16 Ω), 1x 4Ω (2x 8 Ω)
• Di-output
• FX loop
• Dimensions: 510 x 232 x 220 mm
• Weight: 10 kg

• Equipped with: 4 x 12" Celestion G12V Vintage speakers
• Angled design
• Power rating: 280 W
• Impedance: Mono 4/16 Ohm, Stereo 2 x 8 Ohm
• Weight: 40.6 kg
• Dimensions (W x H x D): 755 x 770 x 365
• Includes speaker cable

Bundle offer comprising

• Guitar amplifier head

• Power: 100 W
• 4 channels with all-tube technology - no semiconductor in signal path
• Preamp tubes: 5 x ECC 83
• Power amp tubes: 4 x EL34
• Individual 3-band EQ as well as gain and volume for each channel
• 12 basic sounds can be chosen directly via foot switch or MIDI
• EL34 power amplifier with presence and resonance control
• 2 switchable and programmable master volume controls
• Programmable parallel FX loop with hardware bypass
• Digital reverb with individual controls for each channel
• Series insert loop with hardware bypass circuit
• Emulated DI out
• MIDI IN and MIDI THRU
• Dimensions:: 740 x 310 x 215 mm
• Weight: 22 kg
• Foot switch included
• Suitable dust cover: Article no. 150488 (not included)
• Suitable case: Article no. 227873 (not included)

• 4 x 12" Guitar CabinetFor some guitar sounds (especially rock and heavy metal) a big 4 x 12" is the only way to go. Maybe even two of them.

The speaker is slanted towards the top, which makes sense when it stands on the floor - the sound projects to where you can really hear it yourself, and your band mates will be happy too.

• Slanted design
• Equipment: 4 x 12" Celestion Vintage 30 loudspeaker
• Power handling: Mono 280 Watt @16 Ohm or 4 Ohm, Stereo 2x 140 Watt @ 8 Ohm
• Housing made of 16 mm plywood
• Decorative strips
• 4 Castors
• Dimensions (W x D x H): 712 x 355 x 712 mm
• Weight: 39 kg
• Black Tolex finish
• Suitable protective cover: Article number 268686 (not included)

• The sssnake PPS 1015
• 1.5 m Speaker cable, 2 x 1.5 mm² cross section
• 6.3 mm Jack - 6.3 mm Jack
• Suitable for passive speakers - not for active speakers

• For Marshall cabinets MR 1960B, 1960BV, 1960BX
• Straight model
• Material: Synthetic leather
• Colour: Black
• Dimensions (W x H x D): 760 x 750 x 360 mm

Gone are the days when you only had to run your finger once along all potentiometers of your Marshall to achieve the classic rock sound (as well as tinnitus). The JVM210 is a 2-channel amp with 100 Watt power, but has much more to offer.

First and foremost: the sound. Leaving the clean sound aside (clean/crunch green mode), it is simply, exquisitely Marshall and covers everything from rustic Plexi sounds to modern high gain. The other sound is an atypical American clean sound that you won't hear often from the Brits, but sounds great.

On to colour theory: the clean/crunch channel offers 3 variations - green, orange and red (we know that from the other Marshall models, right?). On orange it is rather Plexi-style, while red takes you to the crunchy '80s.

It carries on in the lead channel - there you'll find gain in all dimensions, without mush and typically snappy. If necessary, more tame sounds can also be generated by a programmable 4-way foot switch with which all switch functions can be controlled. This amp head with 100 W in this price range is practically unbeatable!

• Tube technology
• Power: 100 W
• 2 Channels (without semiconductor in signal path)
• 6 Basic sounds via relay switch
• 2 Effects paths
• Emulated line out
• 2 Master volumes
• Reverb
• Programmable 4-way foot switch
• All switch functions controllable via MIDI
• Suitable case: Article Nr. 227873 (not included)

Bundle offer comprising

• Guitar amplifier head

• Power: 100 W
• 4 channels with all-tube technology - no semiconductor in signal path
• Preamp tubes: 5 x ECC 83
• Power amp tubes: 4 x EL34
• Individual 3-band EQ as well as gain and volume for each channel
• 12 basic sounds can be chosen directly via foot switch or MIDI
• EL34 power amplifier with presence and resonance control
• 2 switchable and programmable master volume controls
• Programmable parallel FX loop with hardware bypass
• Digital reverb with individual controls for each channel
• Series insert loop with hardware bypass circuit
• Emulated DI out
• MIDI IN and MIDI THRU
• Dimensions:: 740 x 310 x 215 mm
• Weight: 22 kg
• Foot switch included
• Suitable dust cover: Article no. 150488 (not included)
• Suitable case: Article no. 227873 (not included)

• Guitar Speaker Cabinet
• Equipped with: 4 x 12" Celestion G12V Vintage speakers
• Angled design
• Power rating: 280 W
• Impedance: Mono 4/16 Ohm, Stereo 2 x 8 Ohm
• Weight: 40.6 kg
• Dimensions (W x H x D): 755 x 770 x 365
• Includes speaker cable

• The sssnake PPS 1015
• 1.5 m Speaker cable, 2 x 1.5 mm² cross section
• 6.3 mm Jack - 6.3 mm Jack
• Suitable for passive speakers - not for active speakers

Whether it's alongside Jimi Hendrix or many other guitar heroes, this amp was and is constantly found as a companion - the "1959" is arguably the Marshall amp with the most eventful history, with the most reissues and special series, that has ever existed in the history of the Brits. And since 2004, there has been (parallel to the 1959SLP from the New Vintage series) yet another edition. The 1959HW is a very special treat, because it is completely hand-wired using the exact same manufacturing techniques to produce Jimi Hendrix's stage amps (at that time still in Jim Marshall's first factory in Hayes).

We will waste no more words on the sound qualities of this amp - that would be superfluous.

• "Jimi Hendrix" Signature
• Power: 100 W
• 3x ECC 83 Tubes
• 4x EL34 Tubes
• Completely handmade
• 2 Input channels
• Input patching possible
• 2 Speaker outputs with 4, 8, 16 ohm impedance
• Voltage selector
• Weight: 21 kg

• For Marshall 1936
• Material: Vinyl
• Dimensions: 74 x 59 x 31 cm
• Colour: Black

• For Marshall 1960 AHW
• Material: Vinyl
• Dimensions: 76 x 73 x 37/29 cm
• Colour: Black

• Preamp based on the classic 1959 SLP
• 1 Channel with 4 separate inputs
• Power: 20 Watt with power reduction to 5 Watt
• Equipped with: 10" Celestion V-Type Speaker
• Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34
• Controls: Treble, Midtones, Basses and Presence
• DI out
• Serial FX loop
• Dimensions: 500 x 460 x 245 mm
• Weight: 15.85 kg

• Reissue series - authentic DSL sound
• Power: 20W
• 2 Footswitchable channels with classic gain and ultra gain
• Preamp tubes: 3x ECC83
• Power tubes: 2x EL34
• Tone Shift key for centre configuration
• Bass switch that complements a resonant bass boost
• Independent volume and gain controls for both channels
• Common sound control for treble, mid and bass
• Emulated line output
• Serial FX loop
• Including footswitch

• With LED
• Suitable for Marshall Code Series

• Suitable for the front edge
• For slanted cabinet shape
• 2-pack

Marshall sound pure: Model 2203 is regarded as the JCM800 re-issue amp. The head with 100 W master volume is still a sound reference number one, when it comes to honest, open and audible overtones leadsound.

With the New Vintage series Marshall offers the most successful re-issue of the original heads first presented in 1975. This follows faithfully the popular design of the top speaker JCM 800 series born in 1981.

Next to the best reproduction of the original sound, New Vintage series 2203 includes a single feature that is different from the original: FX Loop. It is of course switchable via hardware bypass, so that, when operating without effect device, the sound circuit of the model is available unchanged. Furthermore FX Loop offers level circuit for adaptation to most effect units.

• Output Power: 100 W RMS
• 3 Preamp tubes ECC83
• 4 Output tubes EL34
• One channel design with high and low sensitivity inputs
• 3-Band EQ with Presence
• Serial FX Loop with True Bypass switch
• Level circuit for the FX Loop
• Authentic design
• Certified according to CE directives of the EU proved device
• Dimensions (W x H x D): 750 x 310 x 210 mm
• Weight: 18.8 kg
• Suitable case: Article Nr. 227873 (not included)

• Equipped with: 4x 12" Custom G12 Vintage Marshall/Celestion 70 W loudspeakers
• Straight design
• 280 W
• Impedance mono: 4/16 ohm
• Impedance stereo: 2x8 ohm
• Finger joined cabinet with optimum resonance behaviour
• Weight: 41.4 kg
• Dimensions: 755 x 770 x 365 mm
• Incl. speaker cable and 4 screw-on casters