NANO Modules

• Analogue VCO/LFO on CEM3340 basis
• Octave selector switch (control range: 8 octaves) and Fine-Tune control
• Selector switch for VCO and LFO mode
• Selector switch for linear or exponential FM
• CV inputs for FM and pulse width with attenuators
• Hard sync input
• Waveform outputs for: Sine, triangle, sawtooth, pulse, two complex waveforms and two square sub-octaves (-1 octave and -2 octaves)
• Current consumption: 50mA (+12V) / 30mA (-12V)
• Width: 8 HP
• Depth: 30 mm

• Four-channel AD envelope generator and LFO
• Per channel controls for rise and fall time
• Three selectable time ranges per channel: Fast 0.1ms - 4s / Medium 1ms - 16s / Slow 20ms - 80s
• Each channel works automatically as a unipolar LFO if the trigger input is not occupied.
• Trigger input and signal output per channel
• Current consumption: 20mA (+12V) / 12mA (-12V)
• Width: 10 HP
• Depth: 15 mm

• Analogue dual mixer
• MAR offers 2 independent mixers in one module
• Mixer X with 4 inputs and volume control per channel
• Normal (X+) and inverted output (X-) available
• Mixer Y sums up 4 inputs to a common sum knob
• Outputs for Y and X+Y available
• Output of Mixer X can be normalised to Mixer Y
• Processes audio, CV, trigger and gate signals
• Noise-free audio quality with high headroom
• All controllers with logarithmic characteristic curve
• Power requirements: +20 mA (+12 V) / -20 mA (-12 V)
• Width: 8 HP
• Depth: 20 mm

NANO Modules SERRA; Eurorack module; advanced analog ADSR envelope generator; sliders for Attack, Decay, Sustain and Release (each with CV input); selectable normalization of the CV inputs via Norm/Indep switch; slow/fast switch for segment times from 1ms to 40s; illuminated manual Gate button; Attenuverter (bipolar) and Offset control, (+/-5V) for scaling the envelope signal on the OUT output jack; ENV output for unprocessed envelope signal (+10V); End-Of-Cycle trigger output; Gate and Trigger inputs; SIG input for processing external audio and CV signals with the Attenuverter and Offset; 3 status LEDs; power consumption: 53mA (+12V) / 39mA (-12V); width: 10 HP; depth: 20mm

• 4-Channel VCA and mixer
• Clear and discolouration-free signal quality
• Suitable for audio and CV signals
• Channel 1-3 with gain control and CV attenuator
• Channel 4 CV input normalised to +5V when socket is not assigned (VCA open)
• VCA outputs 1-3 normalised to output 4 for use as mixer
• Current consumption: 58 mA (+12 V) / 31 mA (-12 V)
• Width: 8 HP
• Depth: 15 mm

• Analogue multimode filter
• Separate outputs for 2-pole lowpass (-12 dB/oct.) and 2-pole bandpass (-12 dB/oct.)
• Can be used as a sine oscillator when self-oscillating
• Filter frequency controllable via calibrated 1V/octave input and additional CV input with bipolar attenuator
• CV input for resonance control with bipolar attenuator
• Current consumption: 22 mA (+12 V) / 25 mA (-12 V)
• Width: 6 HP
• Depth: 20 mm

• 2 Inputs: 6.3 mm TRS, balanced, with gain control of max. +20 dB and level meter
• 2 Integrated active 1-to-3 multiples
• Precision Adder with 2 CV inputs
• 2 Sum outputs and octave rotary switch, range: -2 to +5 octaves
• 2 LFOs, each with frequency control and triangle and square wave output
• Sample & Hold stage with separate output for white noise
• 2-Channel stereo mixer
• Stereo output with master control: 6.3 mm TRS, balanced
• Stereo headphone output with volume control: 3.5 mm jack
• Integrated bus board with 18 slots for modules
• Installation depth for modules: 60 mm and 47 mm above busboard
• Carrying handle
• Power supply specifications: 1.25 A (+12 V) / 1.1 A (-12 V) / 500 mA (+5 V)
• Width: 104 TE
• Dimensions (W x D x H): 535 x 200 x 85 mm
• Weight: 1.7 kg
• Incl. an external power supply unit
• Suitable CAIXA 104 Soft Case: Article no. 544862, not included in the delivery