QSC

• Full-range speakers
• Equipment: 15" Woofer with 3.5" voice coil and 1.5" tweeter with 2.8" voice coil
• Capacity: 500 Watt continuous power / 2,000 Watt peak power
• Nominal impedance: 8 Ohm
• Beam angle: 75° Conical
• Frequency range (-10 dB): 43 - 20,000 Hz
• Maximum sound pressure level (1 m): 130 dB
• Inputs: 2x Speaker Twist (1x Through) and connection terminal with screw terminals
• 2x 35 mm High-stand flange (0° or -10°)
• 3 Mounting points M10 for flying suspension
• Multi-plex housing with impact-resistant black textured lacquer
• Dimensions (H x W x D): 720 x 416 x 445 mm
• Weight: 34 kg
• Colour: Black

Suitable Accessories (not included):

• E115 Cover with protective padding made of robust nylon/Cordura: Article Nr. 451742
• KW M10 Kit W eyebolt kit for suspension: Article Nr. 451757
• E115 Yoke U-mounting bracket for vertical and horizontal installation: Article Nr. 451743

• Suitable for the QSC K 12 and K 12.2
• Colour: Back

• Suitable for QSC KS212C subwoofer
• Durable and weatherproof nylon
• Padded
• With cable compartment
• Transportation strap
• Colour: Black

• 1,000 watt Class D amplifier output power
• 2,000 Watt Hi-Peak Amplifier Output Power
• Assembly: 12" Woofers and 1.75" voice coil
• Dispersion: (-6 dB): 75° axis-symmetrical
• Frequency range (-10 dB): 50 - 20000 Hz
• Max. Sound pressure level (1m): 131 dB
• Built-in two-channel mixer
• Channel A Input: XLR / jack combi jack, Mic / Line input switchable: Mic 24dB / 36dB with MIC LED or line: 0dB / 12dB, gain control, signal LED
• Channel A Output: XLR
• Channel B Input: XLR / jack combo socket and 2 x RCA jacks L / R, line input, gain control, signal LED
• Channel B Output: XLR
• Channel A + B Output: XLR
• Remote volume control via Euro-jack of several loudspeakers for installation application
• DSP corrects non-linear distortions
• EQ modes "DEEP" for rich bass without sub and "vocal" for precise voice reproduction
• "GuardRail" protects power amplifier without switching off
• Slanted monitor angle: can also be used as floor monitor: can also be used as floor monitor
• 35 mm Pole sockets with Tilt-Direct: 0° / -7.5°, e.g. Art.323921
• Speaker grille made of powder coated steel
• Housing made of 15 mm birch multiplex with aluminum handles
• 6 x M10 Mounting points for flying suspension
• Slip resistant feet
• Locking power cable, length: 3 meters (C13 / protective contact)
• Low power consumption: up to 8 KW series loudspeakers can be operated on a 10A / 230V standard line
• Auto standby mode
• Dimensions (H x W x D): 660 x 381 x 391 mm
• Weight: 22.2 kg
• Six years manufacturer's warranty upon product registration
• Suitable protective cover KW122 Outdoor Cover available: Art.260336 (not included)

• Power rating: 1000 Watt amplifier module
• Equipped with: 18"
• SPL: 135 dB peak SPL
• Power Twist input and output
• Dimensions: 653 x 594 x 653 mm
• Weight: 47.2 kg

• 20 Inputs: 4x XLR/TRS combo, 12x XLR, 2x Stereo 1/4" TRS
• 16 Outputs: Stereo Main, 2 x XLR, 6 x Aux, XLR, 2 x Stereo Aux 3/4, jack, 1 x Stereo Cue, jack, 1 x Stereo Monitor, jack
• Phantom Power 48 V switchable per channel
• 4-Band parametric EQ with high/low shelving option
• Gate and compressor on each channel
• 8 DCA Groups (with Mutes)
• 8 Mute groups
• 4 Professional Effect-Engines including Reverb, Echo, Delay, Chorus
• 50 Factory and 50 User Presets
• Display: 6,1" x 3,5" (156 mm x 90 mm) Colour- Touchscreen
• iOS Mixer App for iPad over Wi-Fi provides access to all mixing functions
• Dimensions: 89 mm x 360 mm x 297 mm
• Weight: 2,98 kg
• Includes: USB Wi-Fi Adapter, padded carry case, power supply
• Optional matching Rackmounts: Article Nr. 362563 (not included in delivery)

• Speaker setup: 12” Woofer, 1.4” Compression driver
• Power: 500 W RMS / 1000 W peak
• Class D amplifier module without fan
• Dispersion pattern: 75° Axisymmetric
• Monitor angle: 55°
• 6 EQ presets
• High-performance DSP - Corrects non-linear distortion
• Frequency range (-10 dB): 47 - 20,000 Hz
• Max. level (@1 m): 126 dB
• Limiter LED/Protected circuit design
• Channel A input 1x XLR/Jack combo socket, Line input, Gain control (A+C input)
• Channel B input 1x XLR/Jack combo socket, Mic/Line input, Gain control
• Mic boost switch: +25 dB for channel B
• Channel C input: 1x 3.5 mm Stereo jack (gain/signal LED via channel A)
• 3-Channel mixer: Mix output (post gain): 1x XLR
• 35 mm Stand flange mount
• Speaker grille made of powder-coated steel
• Scratch-resistant plastic housing with ergonomic handle design
• Dimensions (H x W x D): 516 x 350 x 323 mm
• Weight: 13.7 kg

Suitable accessories (not included):

• CP12 Bag available under Article Nr: 449717
• CP12 Outdoor protective cover available under Article Nr 449719
• CP12 U-Style yoke bracket for vertical and horizontal installations available under Article Nr 449718

Note: Register your speaker with QSC to extend its warranty to 6 years.

• Full-range speakers
• Equipment: 10" Woofer with 2.5" voice coil and 1" tweeter with 1.75" voice coil
• Load capacity: 300 Watts continuous power / 1,200 watts peak power
• Nominal impedance: 8 Ohms
• Beam angle: 85° conical
• Frequency range (-10 dB): 50 - 20,000 Hz
• Maximum sound pressure (1 m): 126 dB
• Inputs: 2x Speaker Twist (1x Through) and connection terminal with screw terminals
• 2x 35 mm High-pole flange (0 ° or -10 °)
• 55° Monitor slope
• 9 Mounting points M8 for flying suspension
• Housing made of multiplex with impact-resistant black textured paint
• Dimensions (H x W x D): 560 x 330 x 330 mm
• Weight: 20 kg
• Colour: Black

Matching Accessories (not included):

• E110 Cover Protective cover with protective padding made of sturdy nylon / Cordura: Article Nr. 451735
• M8 Kit A Suspension Bolt Kit for Suspension: Article Nr. 451753
• E110 Yoke U-mounting bracket for vertical and horizontal installation: Article Nr. 451738

Bundle offer comprising

• 2-Way Full-Range Active Speaker
• Speaker setup: 8” Woofer, 1.4” Compression driver
• Power: 500 W RMS / 1000 W peak
• Class D amplifier module without fan
• Dispersion pattern: 90° Axissymmetric
• Monitor angle: 55°
• 6 EQ presets
• High-performance DSP - Corrects non-linear distortion
• Frequency range (-10 dB): 53 - 20,000 Hz
• Max. level (@1 m): 124 dB
• Limiter LED/Protected circuit design
• Channel A input 1x XLR/Jack combo socket, Line input, Gain control (A+C input)
• Channel B input 1x XLR/Jack combo socket, Mic/Line input, Gain control
• Mic boost Switch: +25 dB for channel B
• Channel C input: 1x 3.5 mm Stereo jack (gain/signal LED via channel A)
• 3-Channel mixer: Mix output (post gain): 1x XLR
• 35 mm Stand flange mount
• Speaker grille made of powder-coated steel
• Scratch-resistant plastic housing with ergonomic handle design
• Dimensions (H x W x D): 411 x 273 x 256 mm
• Weight: 9.5 kg

Suitable accessories (not included):

• CP8 Bag available under Article Nr: 449712
• CP8 Outdoor protective cover available under Article Nr 449716
• CP8 U-Style yoke bracket for vertical and horizontal installations available under Article Nr # 449714#

Note: Register your speaker with QSC to extend its warranty to 6 years.

• Speaker Bag
• Suitable for QSC CP8
• Colour: Black