Radial Engineering

• Especially for bass and keyboard
• Mono summation for stereo sources via in and through socket
• Jack input
• Jack output
• XLR output
• Switchable 15 dB pad
• Switchable ground lift
• Robust metal housing
• Colour: Green

• 1 XLR in
• 4 XLR out
• Switchable 48 V phantom power
• Switchable ground lift
• Especially suitable for studio applications to switch a microphone to different preamps
• External power supply

• Jack input
• Jack thru connection
• XLR output
• Switchable -15dB pad
• Merge function to combine 2 line signals to 1x XLR out
• Switchable speaker simulation for 12 guitar speaker
• Ground lift switch
• Phase switch (polarity)

• Balanced re-amper
• XLR in / out
• Jack in / out
• 2x jack loop in / out
• Send and return separately adjustable
• Wet / Dry adjustable
• 180 ° Phase Invert switchable
• Including external power supply 15 V DV 40 0 ​​mA

• Redundant backup switch
• For live applications from previously recorded backing tracks
• Switches to a second backup multi-track system if an error occurs in the main path.
• Silent switching
• 8x XLR outputs
• 2x 8 Jack inputs
• 1x 8-Channel 25-pin D-Sub output
• 2x 8-Channel 25-pin D-Sub input
• Contact inputs and outputs
• Ground lift switch
• Frequency range: 20 - 20,000 Hz
• Gain: -20 dB
• Dimensions 44.5 x 15.25 x 4.5 cm
• Design: 19" / 1 HE
• Weight: 4.4 kg

• Jack In and Thru
• XLR out
• Switchable low cut, -15 dB pad and phase reverse
• Ground lift
• Requires 48 V phantom power

• Splitter for guitar amp
• Converts a +4 dB signal to a hi-impedance signal for guitar amplifiers or effects pedals
• 1x XLR in
• 2x Jack out
• Phase reverse
• Output gain
• Suitable for Radial X-Amp and further system 500 frames
• Attenuation 10 dB to 60 dB

• Suitable for studio and live applications
• 2x XLR female in
• 2x 6.3 mm jack in
• 2x XLR male out
• Switchable mute
• Mono and dim (adjustable)
• Large master volume knob
• Robust metal chassis

• 2x 6.3 mm Jack for instruments
• 3.5 mm Jack and RCA connectors for -10dB consumer hardware
• 2x Balanced XLR out

• Connectors: Jack in/thru, XLR out
• Merge function
• - 15 dB pad
• Low cut
• Phase reverse
• Ground/Lift
• Operates with 48V phantom power

• Specially for laptops
• Reduces humming noises
• Integrated 3.5 mm stereo jack cable (1.5 m)
• 2x 6.3 mm Balanced jack out
• Mono summed XLR out
• Switchable 15 dB pad
• Switchable ground lift
• Robust metal housing
• Colour: Grey

The re-amping technique has always been the "secret weapon" of numerous recordings of the greatest names in the music business and is often used to give a new sound to guitar, bass, keyboard and even vocal recordings. The Radial ProRMP is a fully passive Re-Amplifier that allows you to re-record a previously recorded track through a guitar amp or an effect pedal to create new and exciting sounds.

The ProRMP Re-Amplifier is extremely easy to use - it is connected between the recording device and your amplifier or effects device and automatically adjusts the impedance. All you have to do is adjust the level!

The secret of the outstanding ProRMP sound is a specially crafted transformer, which matches the balanced, low-impedance signal source for the connection to the high-impedance input of your amplifier and at the same time serves as a mass splitter, which prevents rumble and other noise in the signal caused by mass loops.

Like all radial products, the ProRMP is extremely sturdy. Surrounded by a 2mm steel plate, the unique "book support" design with a welded double T-beam construction ensures that the ProRMP is protected against damage and the board and the soldering points are not subjected to any loads, which significantly increases the reliability . A non-slip full base coating ensures a secure hold and avoids electrical contact points which could lead to ground Loops when touching parts of guitar amplifier housings.

The Radial ProRMP - cost-effective, professional re-amping for every studio!

• Playback of recorded tracks through amplifiers and guitar effects
• Allows creative, new sound design
• Makes repeated recording during recording unnecessary
• Built-in level control allows fine adjustment of gain
• Transformer isolation prevents the generation of ripple loops and noise

Areas of application

Suitable for "re-amping" all instruments:

• Electric guitars
• Bass guitars
• Keyboards
• Electric violins
• Singing and language
• Percussion
• XLR input
• 6.3 mm output

• Connected between amp and speaker with the jack cable
• Switchable Gnd-Lift
• Switchable polarity 180°
• Switchable bass extension for more low end when operating with electric bass
• Integrated speaker emulation of a 4x 12" guitar speaker
• 300 Watt switch for high-power amplifiers
• XLR-output
• Impedance: 15 kOhm
• Operation via 48 V phantom power or external 15 V DC power supply unit (included)
• Dimensions: 127 x 159 x 51 mm
• Weight: 1280 g
• Colour: Red

• Converts balanced signals (XLR) into unbalanced signals (jack / RCA / mini-jack)
• Switchable ground lift
• Adjustable output level
• Robust metal housing
• 2 XLR female inputs
• 2 Jack outputs
• 2 RCA outputs
• 3.5 mm mini-jack output
• Jensen Transmitters

• Jack in/thru
• XLR out
• - 15 dB pad
• Ground/lift
• Operates with 48V phantom power

• 1 Input, 3 outputs
• Input: XLR female
• Thru: XLR male
• Switchable 30 dB pad
• 2 XLR male outputs with switchable Ground Lift on each
• Stable metal housing

• Splitter for guitar amps
• Converts a +4 dB signal into a hi-impedance signal for guitar amplifiers or effects pedals
• 1x XLR in
• 2x Jack out
• Phase reverse
• Output gain
• Attenuation 10 dB to 60 dB
• Incl. power supply

• 1 x XLR input
• 2 x XLR output
• Large foot switch for switching
• 15 dB pad can switch between channels
• -3 dB Trim and Gnd / Lift to Input B
• Robust metal housing
• Colour: Black

• Eliminates hum and buzzes by ground loops in the frequency range 20 - 18.000 Hz
• XLR input and output
• Switchable GND / lift
• Compact and sturdy metal housing
• Dimensions: (W x H x D): 107 x 34 x 41 mm
• Weight: 180 g

• For system 500 modules
• Per input channel input (XLR and jack), output (XLR and jack), omniport, feed and link switch
• Switchable 48 V phantom power
• External power supply
• Metal grip