SE Electronics

• Large-diaphragm condenser microphone
• Polar pattern: Cardioid
• Handmade capsule
• LoCut filter: 80 Hz, 160 Hz
• Pad: 0 dB, -10 dB, -20 dB
• Gold-plated XLR contacts
• Noise: 9 dB (A)
• Boundary sound pressure level: up to 160 dB (THD 0.5%)
• Requires 48V phantom power

Incl. accessory set consisting of:

• Isolation Pack Shockmount - professional microphone spider
• Pop Screen Metal
• SE Microphone cable XLR / XLR, length 3 m

• Dynamic
• Polar pattern: Supercardioid
• Integrated pop filter
• Robust microphone grille from spring steel
• Integrated shock mount
• Gold XLR connector
• Frequency range: 40 - 19,000 Hz
• Output impedance: 300 Ohm
• Sensitivity: 2.0 mV / Pa (-54 dB)
• Dimensions: 54 x 184 mm
• Weight: 305 g
• Incl. microphone clamp, integrated windscreen (black), carrying pouch and threaded adapter

• Polar pattern: cardioid
• Frequency range: 30 - 19,000 Hz
• Impedance: 300 ohms
• Sensitivity: 2.0 mV / Pa (-54 dB)
• Robust metal housing with roll-away protection
• Dimensions (Ø x L): 47 x 176 mm
• Weight: 269 g
• Incl. microphone mount, thread adapter, integrated windscreen (black) and microphone pouch

• Dynamic
• Cardioid
• Integrated pop filter
• Robust microphone mesh grille from spring steel
• Integrated shock mount
• Gold XLR connector
• Frequency range: 50-16,000 Hz
• Output impedance: 600 Ohm
• Sensitivity: 2.5 mV / Pa (-52 dB)
• Dimensions: 52 x 181 mm
• Weight: 295 g
• Incl. microphone clip, integrated windscreen (black), carrying pouch and threaded adapter

SE Electronics V Pack Arena; drum microphone set for studio and live use consisting of: 1 x V Kick for kick drum or floor tom; 1 x V7 X dynamic instrument microphone with supercardioid polar pattern; 1 x sE8 stereo pair small diaphragm condenser microphones;3 x V Beat with V Clamp including thread adapter and microphone clamps for toms and snare; 1 x V Case

• Polar pattern: supercardioid
• Frequency range: 40 - 19,000 Hz
• Sensitivity: 2.0 mV/Pa
• Interchangeable head for all Shure (except BLX and GLX-D systems) and Line6 radio links
• Weight: 0.15 kg

• With 2/3" capsule
• Polar pattern: Cardioid
• Frequency range: 20 - 20000 Hz
• Impedance:
• Sensitivity: 20 mV / Pa (-34 dB)
• Signal-to-noise ratio: 78 dB (A)
• Equivalent Noise level: 16 dB (A)
• Dynamic range: 114/134 dB (0/20 dB pad)
• Low Cut Filter: 100 Hz, 6 dB / Oct, switchable
• Attenuation: 20 dB, switchable
• Connectivity: 3-Pin XLR connector
• Power requirement: 48 V phantom according to IEC 61938
• Recommended load impedance:> 1K Ohm
• Power Consumption: 4.0 mA
• Diameter: 58 mm
• Length: 169 mm
• Weight: 390 g
• Includes microphone holder and thread adapter

SE Electronics DynaCaster; dynamic studio microphone; perfect for voice recording; polar pattern: cardioid; integrated preamp boosts level by 30 dB when needed (requires 48V phantom power); filter for cutting or boosting bass frequencies; filter for boosting treble in two steps; integrated three-layer windscreen; frequency response: 20 Hz - 19 kHz; sensitivity: 2.0 / 60 mV/Pa (-54 / -24 dBV); dimensions(DH) 62 x 220 mm; weight: 732 g

• Polar pattern: Cardioid
• Resolution: 24 bit/192 kHz
• Microphone gain, headphone level, monitor mix and mute control directly at the microphone
• Integrated shockmount
• Class compliant
• Frequency response: 20 - 20,000 Hz
• Compatible with PC/Mac/iPad/Android
• Dimensions: 174 x 56 x 40 mm
• Weight: 0.4 kg
• Incl. table stand, microphone clamp and USB C to USB A cable

• Well suited for picking up guitar amplifiers
• Wooden / brass instruments
• String instruments
• Drum overheads
• Broadcast
• Voiceover and much more
• Type: Passive
• Capsule: aluminium ribbon
• Frequency response: 20-16000 Hz / - 1 dB
• Sensitivity: -55.3 dB 1V / Pa / - dB
• Directional characteristics: Figure Eight
• Impedance: 200 Ohm
• Connection: 3-pin
• Max SPL: 135 dB
• Incl. Tripod joint
• Weight: 0.5 kg

• Myles Kennedy (Alter Bridge) Signature Edition
• Polar pattern: supercardioid
• An integrated pop filter
• Robust microphone cap made of rugged spring steel
• An integrated elastic mount
• An integrated black windscreen
• Gold-plated XLR connector
• Frequency response: 40 - 19,000 Hz
• Output impedance: 300 Ohm
• Open circuit sensitivity: 2.0 mV/Pa (-54 dB)
• Dimensions: 54 x 184 mm
• Weight: 305 g
• Incl. microphone clamp, microphone bag and thread adapter

• Switchable +15 / +30 dB amplification
• Ideal for low output ribbon or dynamic microphones
• Switchable load impedance (8 stages)
• Class-A FET transistors
• Low self-noise
• An additional output stage for an independent load
• Allows long cable runs and reduces the susceptibility from RF interference
• Gold-plated XLR contacts
• Robust all-metal housing
• Requires 48 V phantom power

• Ideal for bass drum and other bass instruments
• Directivity: Super-cardioid
• Frequency range: 20/19000Hz
• Sensitivity: 0.2/0.4 mV/Pa
• Four different sound adjustments possible
• An integrated shockmount decouples the capsule from vibrations and shocks
• Integrated windshield
• Solid all-metal housing
• Dimensions (Ø x H): 60 x 135 mm
• Weight: 468 g

SE Electronics V Pack Club; drum microphone set for studio and live use consisting of: 1 x V Kick for kick drum or floor tom; 3 x V Beat with V Clamp including thread adapter and microphone clamps for toms and snare; 1 x V7 X dynamic instrument microphone with supercardioid polar pattern; 1 x sE7 stereo pair small diaphragm condenser microphones; 1 x V Case

• Replaceable head for Sennheiser transmitters
• Polar pattern: Supercardioid
• Frequency response: 40 - 19,000 Hz
• Sensitivity: 2.0 mV/Pa
• Weight: 0.15 kg

• Handmade small diaphragm condenser capsule
• Polar pattern: Cardioid
• Frequency range: 20 to 20,000 Hz
• Max. SPL (0.5% THD): 139/149/159 dB SPL (0/10/20 dB pad)
• 13 dB (A) inherent noise
• LoCut switchable: 80 / 160Hz (6dB / oct.)
• Pad switchable: 0dB, 10dB, 20dB
• Requires 48 V phantom power
• Dimensions per micro: 23 x 120 mm (diameter x length)
• Weight per mic: 141g
• Includes windscreen, microphone clamp, stereo bar and transport case